[Addon] Jamba - An assistant for multiboxers. Old Thread

[Jafula]

I'm using Jambda 0.7d, huge fan of the program.

My current issue is Jamba-Quest. Two of my three slaves will notify the master perfectly and without fail when they have accepted a new quest. The third slave doesn't send any notifcation at all. The third slave will accept the quest, but I don't receive the notification on the master.

I've check and double-checked the settings on that toon, and I don't see any difference betwen that third slave and the others.

Any help? I'm looking at the Jamba-Quest section of the addon, but is there somewhere else I should be focusing?

Thanks!

Jamba-Quest has a message area. Make sure the message area on all toons is the same. Do you know about the "push settings" buttons? Clicking those will push the settings to all your other toons. That way you don't have to change settings on each toon individually.

If you are happy with the settings on one toon, I would go into the /jamba -> Jamba configuration and click the button that pushes all the settings for all modules. That way you can be sure all your toons have the same settings.

Hope that helps some, and if it doesn't, please post here and we'll see what else we can try.

[Darm]

Jamba-Quest has a message area. Make sure the message area on all toons is the same. Do you know about the "push settings" buttons? Clicking those will push the settings to all your other toons. That way you don't have to change settings on each toon individually.

If you are happy with the settings on one toon, I would go into the /jamba -> Jamba configuration and click the button that pushes all the settings for all modules. That way you can be sure all your toons have the same settings.

Hope that helps some, and if it doesn't, please post here and we'll see what else we can try.

Push the settings *for all modules* did the trick I knew about the other push settings button, but that "master override" push settings appears to have worked. Thanks!

[olibri1]

Since I leveled to 85 already, I don't have a vested interest in this getting fixed, but here's my contribution since I used it. At a minimum maybe it can help someone else:

1. When i enable jamba-quest, a big window appears in the center of the screen that I cannot move. Since I needed it, I just edited the wtf file and moved it to the upper right corner. Since I finished leveling, I have just turned it off.
2. Occasionally (very rarely) the quest tracking for who has how many of what gets out of sync. Recently I was running a quest in twilight highlands for 30 minutes before I realized that everyone had been done collecting for a while.
3. It may be that my data is stale (from older Jamba), but when I went to add the 5th to the team (old team already existed-1), I'd add the name and click the button, but nothing happened. I ended up playing the entire time with 4 synced in Jamba and 1 partially synced (new member still had the master).

[Jafula]

Since I leveled to 85 already, I don't have a vested interest in this getting fixed, but here's my contribution since I used it. At a minimum maybe it can help someone else:

1. When i enable jamba-quest, a big window appears in the center of the screen that I cannot move. Since I needed it, I just edited the wtf file and moved it to the upper right corner. Since I finished leveling, I have just turned it off.
2. Occasionally (very rarely) the quest tracking for who has how many of what gets out of sync. Recently I was running a quest in twilight highlands for 30 minutes before I realized that everyone had been done collecting for a while.
3. It may be that my data is stale (from older Jamba), but when I went to add the 5th to the team (old team already existed-1), I'd add the name and click the button, but nothing happened. I ended up playing the entire time with 4 synced in Jamba and 1 partially synced (new member still had the master).

Thanks for your feedback, it's appreciated.

1. There is an option in /jamba-quest which allows you to move the window.
2. Not sure I can do anything about that given its very rarely. I hope the update button helped you.
3. Several others have reported this problem (it only came to my attention yesterday), so I think it might be a bug, will be having a look at it today.

[TRoN]

Hi guys, I installed LUI and my Jamba stopped working Damn!! Here's the post I submitted to LUI forum that refers the issue:

First, thanks for this awesome UI. I've never seen something so close to what it should be. Very good!
Now, I installed LUI and spent some time configurating and learning how things work, then I went to the field to test it out with 2 of my chars. I'm multiboxing so Jamba is my absolute priority addon. It makes MBxers life so much easier.

The problem is: Jamba has a feature that changes Party Leader when changing master toon (/jamba-team iammaster all). This stopped working. I think, for some reason, LUI is preventing Jamba to contact the other clients so all the orders sent by Master are not received by the Slaves. It can't even Push Settings.

I'm posting this issue to Jamba forum aswell and I hope to see if there's some workaround or fix to this problem.
[...]

Thanks a lot for some your feedback you may give to this.

/hug
TRoN

[TRoN]

Found a solution for the problem above (LUI+Jamba):

Open the <WoW Directory>/Interface/AddOns/LUI/LUI.xml file and remove the line containing:

   <Script file="scripts\partyfix.lua"/>

[Ughmahedhurtz]

Silver Tide Hollow flight path to Sandy Beach in Vash'jir does not function with Jamba. I can mouseclick broadcast it but Jamba will not process it. I get an error telling me no direct path exists for that connection or something similar. I don't go there much but just thought you should know.