Close
Page 65 of 212 FirstFirst ... 15 55 63 64 65 66 67 75 115 165 ... LastLast
Showing results 641 to 650 of 2112
  1. #641

    Default

    Quote Originally Posted by 'algol',index.php?page=Thread&postID=140550#post14 0550
    Jamba-No seems to be failing to block guild spam.

    Yeah, I know, I should make a guild with myself already. But figured I'd note it if you haven't found out yet.
    Oh, its not working anymore? Thanks, I'll check it out.
    Jafula.
    Jamba - Jafula's Awesome Multi Boxer Assistant. An addon for YOU.

  2. #642

    Default

    Quote Originally Posted by 'delafoo',index.php?page=Thread&postID=140580#post 140580
    Quote Originally Posted by 'Jafula',index.php?page=Thread&postID=140176#post1 40176

    Quote Originally Posted by 'delafoo',index.php?page=Thread&postID=140101#post 140101
    Question, I have the /jamba-follow master all macro on all my toons. When I switch windows, from Shockershama to Shockershame, and press it, it follows ShockershamA again instead of ShockershamE, how can I remedy this so that the current open window is the new master and followed as such?

    Thanks!
    Ok, make sure on your each toon that in your macro command to switch that toon to the master that you have

    /jamba-follow master all

    and on the other toons, for that same key press, don't have any follow command at all.

    So to toggle between A and B

    F1 to make A master
    F2 to make B master

    A Macros
    F1:
    /focus A
    /jamba setmeasmaster all
    /jamba-follow master all

    F2:
    /focus B

    B Macros

    F1:
    /focus A

    F2:
    /focus B
    /jamba setmeasmaster all
    /jamba-follow master all

    Does that make sense?

    (And if you want the current master to also be the party leader, you can set the promote option in Jamba Group.)
    Makes sense, however not working for me. Could it be conflicting with Keyclone? Since my pIp window change buttons are F8-F12, binding these macros to F8-12 doesn't seem to work.... I tried then binding all the macros to the numberpad, 1-5, and still, keeps playerA as master. I have 'auto promote master to leader' on in all, and I do see that the focus pic, of who is the focus changes correctly to the corresponding macro (i.e.) button 2 shows the focus of player b, button 3 shows the focus of player c, ... but they dont' follow, or auto promote the focus to leader or follow, toonA is kept as leader and followed, even in new windows when the focus is changed. Suggestions?
    I have my buttons bound to switch PiP and switch party master like Jafula says, but Ive noticed I have to hit the key twice for it to shift the focus. So I have just got in the habit of double tapping the key when I change PiP.
    Currently running 10 miners in Eve Online.

  3. #643

    Default

    Verified that each player is checked on all toons. Set leader to master is checked as well, still focuses correctly, but does not set focus as leader or follow focus, still follows Shockershama the main toon.

    For all non 'master' toons, I have /focus Shockershama(or b,c,d,e) as the macro. For the toon I want to be leader and followed, I have,
    This as my macro, no returns, written exactly as typed (sub the correct name for each toon... so for my 5th toon, Shockershame, this is the macro:

    /focus Shockershame /jamba setmeasmaster all /jamba-follow master all

    bound to the corresponding key... 1 for shama, 2 for shamb..etc to 5.

    When I hit the desired key, it focuses, but does not follow, and still follows shamA.

    I have a seperate follow macro bound to 'G' /jamba-follow master all

    Suggestions?

  4. #644

    Default

    Quote Originally Posted by 'delafoo',index.php?page=Thread&postID=140936#post 140936
    Verified that each player is checked on all toons. Set leader to master is checked as well, still focuses correctly, but does not set focus as leader or follow focus, still follows Shockershama the main toon.

    For all non 'master' toons, I have /focus Shockershama(or b,c,d,e) as the macro. For the toon I want to be leader and followed, I have,
    This as my macro, no returns, written exactly as typed (sub the correct name for each toon... so for my 5th toon, Shockershame, this is the macro:

    /focus Shockershame /jamba setmeasmaster all /jamba-follow master all

    bound to the corresponding key... 1 for shama, 2 for shamb..etc to 5.

    When I hit the desired key, it focuses, but does not follow, and still follows shamA.

    I have a seperate follow macro bound to 'G' /jamba-follow master all

    Suggestions?
    All your toons have the "all" tag don't they?

    I have been thinking about this some more; and I noticed that my follow macro is not on my set master macro. Perhaps the logic is getting mixed up here internally in Jamba and the master change has not happened when the follow command is issued. I cannot see how this would be the case, but I'll try you macro method with my toons and see what happens...

    Could you perhaps try changing the last part of your macro to

    /jamba-follow target Shockershame all

    and see if that works?
    Jafula.
    Jamba - Jafula's Awesome Multi Boxer Assistant. An addon for YOU.

  5. #645

    Default

    Quote Originally Posted by 'Jafula',index.php?page=Thread&postID=140401#post1 40401
    Quote Originally Posted by 'zanthor',index.php?page=Thread&postID=140359#post 140359
    Feature Request: Follow-Strobe-Pause-On-Combat.

    A simple change to the follow strobe system that would be amazingly useful for hunters, melee, etc... This is a combination of auto-follow after combat and follow strobe. Ideally this would be a configuration setting on the individual client so you could have two casters follow a leader and melee charge in while a hunter stands still and shoots, etc...
    So when combat starts, follow strobing stops. When combat starts, follow strobing starts again. But set for individual toons. So if I use the tag system, you can add the tag 'pausestrobe' to your toons as appropriate. Then the Pause Follow Strobe In Combat option will have a single tag associated with it (you would enter 'pausestrobe').

    Do I understand you correctly?
    So IN combat pauses for toons who have the tag "pausestrobe" without any keypress right?
    [> Sam I Am (80) <] [> Team Doublemint <][> Hexed (60) (retired) <]
    [> Innerspace & ISBoxer Toolkit <][> Boxing on Blackhand, Horde <]
    "Innerspace basically reinvented the software boxing world. If I was to do it over again, I'd probably go single PC + Innerspace/ISBoxer." - Fursphere

  6. #646

    Default

    Quote Originally Posted by 'zanthor',index.php?page=Thread&postID=140948#post 140948
    So IN combat pauses for toons who have the tag "pausestrobe" without any keypress right?
    Yes, without a keypress, it will stop strobing the /follow command. (And start strobing the /follow command when combat ends.)

    But it won't actually stop any toons from following (you'll need a keypress to do that).
    Jafula.
    Jamba - Jafula's Awesome Multi Boxer Assistant. An addon for YOU.

  7. #647

  8. #648

    Default

    hmm i was really excited to get this working, but it didn't play nicely with keyclone. For some reason it wasn't passing keys when I had it installed, so I had to remove it =(

  9. #649

    Default

    I got it to work!!! with my 5 priest team, apparently I needed to check everything in the Switch area.

    However, I do notice it takes a bit for some of the last 3 toons to follow the leader, and some follow the previous leader, who follows the current leader. But I"m happy nonetheless. Thanks.

  10. #650

    Default

    Quote Originally Posted by 'delafoo',index.php?page=Thread&postID=141069#post 141069
    I got it to work!!! with my 5 priest team, apparently I needed to check everything in the Switch area.

    However, I do notice it takes a bit for some of the last 3 toons to follow the leader, and some follow the previous leader, who follows the current leader. But I"m happy nonetheless. Thanks.
    Fixed the lag problem, unchecking, set target as master did it, thanks WOOOHOOOOOO... after spending a week on the FTL system to no avail, I was about to give up until olips told me about the hydra system and linked me there. Thanks for keeping my 5s teams alive

Similar Threads

  1. Replies: 29
    Last Post: 06-27-2009, 03:09 AM
  2. Replies: 1
    Last Post: 04-23-2009, 05:57 PM
  3. Any idea when we'll see an update for Jamba?
    By Clovis in forum Macros and Addons
    Replies: 2
    Last Post: 04-20-2009, 09:21 AM
  4. Jamba Addon new features suggetion
    By Ivanhalf in forum Macros and Addons
    Replies: 3
    Last Post: 04-01-2009, 04:26 AM
  5. SickOfClickingDailies AddOn - great for multiboxers
    By puppychow in forum Macros and Addons
    Replies: 1
    Last Post: 10-16-2008, 04:14 PM

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •