[Addon] Jamba - An assistant for multiboxers. Old Thread

[Jafula]

[quote='nakago',index.php?page=Thread&postID=130067 #post130067]A few things from my earlier setup:

My Focus Macro:
Main Machine:

/clearfocus
/focus [modifier:ctrl,modifier:shift,target=Boltee] [modifier:ctrl, target=Boltea] [modifier:shift, target=Boltae] [target=Boltaa]
[b]/clearfocus[/b]
[/quote]I'm assuming the extra /clearfocus is a typo? The rest of your macros look fine. If you use the follow strobing, make sure you have a macro set up to turn it off (should you wish you slaves to stop following).
[quote='nakago',index.php?page=Thread&postID=130067 #post130067]This seems to work reasonably well, though I am not sure if I need the the Main Machine Macro on my slaves too or if the shorter one for the slave machines will suffice,
I want to make sure that if I need to switch to a slave machine and make it my main that I can do what is needed properly...

Main Machine:

/focus Leader
/script SetView(5);SetView(5)
/jamba setmeasmaster all
/jamba-follow strobeonme all


Slave Machines:

/focus Leader
/script SetView(5);SetView(5)
[/quote]How (most) commands work in Jamba. If a command has a <tag> option it works in one of two ways.

1) If you do not add a tag, only the toon that you ran the command on will do the command.
2) If you do add a tag like "all", then the toon that you ran the command on does not run the command, but sends the command to every toon (including itself). Each toon then looks at the tag and only does the command if it has same tag as the command.

So your example above is fine as you have "all" tags on your two jamba commands.

But if you want to switch masters, you should probably have a button for each toon. So above you have the correct macros but perhaps not being actioned correctly? Set up some keys; say F10 to make Boltee the leader, F11 to make Boltea the leader, F12 to make Boltaa the leader.

[size=14]On Boltee:[/size]

[size=12]F10 does:[/size]

/focus Boltee
/script SetView(5);SetView(5)
/jamba setmeasmaster all
/jamba-follow strobeonme all
[size=12]
F11 does:[/size]

/focus Boltea
/script SetView(5);SetView(5)

[size=12]F12 does:[/size]

/focus Boltaa
/script SetView(5);SetView(5)

[size=14]On Boltea
[/size]
[size=12]F10 does:[/size]

/focus Boltee
/script SetView(5);SetView(5)

[size=12] F11 does:[/size]

/focus Boltea
/script SetView(5);SetView(5)
/jamba setmeasmaster all
/jamba-follow strobeonme all

[size=12]F12 does:[/size]

/focus Boltaa
/script SetView(5);SetView(5)
[size=14]
On Boltaa[/size]

[size=12]F10 does:[/size]

/focus Boltee
/script SetView(5);SetView(5)

[size=12] F11 does:[/size]

/focus Boltea
/script SetView(5);SetView(5)

[size=12]F12 does:[/size]

/focus Boltaa
/script SetView(5);SetView(5)
/jamba setmeasmaster all
/jamba-follow strobeonme all
[quote='nakago',index.php?page=Thread&postID=130067 #post130067]No matter what settings I use I can't get ANY of the quest automation to work, no idea why, I have tried every combination of options, no dice.
My old Lightning Bolt attack macro doesn't work anymore, even though I get messages saying that Boltao, my main is everyone's focus... so my LB Macros should fire off, but that is not happening.
I can't get any of the sales things to work either.

I am just wondering if I am missing anything in my setup, I made sure to designate all members in my 5 man shaman group to be on each machines list, and that the Master is set to Boltao.

Any hints, tips, thoughts, or macro help will be happily accepted, thanks!![/quote]Are all your [url='http://www.dual-boxing.com/forums/index.php?page=Thread&postID=126727#post126727']toons checked[/url] in the Jamba Team tag?

You are getting messages saying that your main is everyones focus. Have you bound the Jamba key to change focus found in the keybindings. You need to press that to make the focus change to the new master. Please note that this will not work in combat. If you switch masters in combat, your focus's will not update.

Please let me know if I have helped any and what you change that made things work for you (if something here helps).

[Jafula]

tested addon this week, nice features but seems to disconnect single chars randomly, still have no clue why. still a seriuos issue because a disconnecting toon in the middle of a fight is not what you want i'm sry i can't give a situation where it always happens the only thing i can state is without jamba i only get a disconnect when my provider refreshes my ip

Perhaps some lag? Do you have a fast PC or are you pushing your PC to its limits? You are using Jamba 0.2a or 0.2b? Hmmm...

[Razman]

I will test again. All works fine in PvE, all toons dps what my master is targetting even wgen I swap the leader mid fight just for testing. It seems ok in PvP too on an initial run, meaning get into a BG meet the enemeny and start to dps. Where it goes wrong is when after Im sheeped after Im feared. I re hit my F button to get everyones focus back onto the leader and they all follow but most times when I press my dps buttons nothing happens they stand there.

On my change leader button (F5-F10 tied in with PiP) I simply put

/focus obal
etc etc as said this works fine no probs even swapping mid fights each toon is being focused

my dps is set up like

/cast [target=focustarget, harm] [] Lightning Bolt

my follow is

/jamba-follow master all

I have the box ticked - on focus change set focus to master

All works perfectly in pve tests - was tending to break after I met a lok though after fear on my current leader

I will test it again as this is the first time vere I have used focus other than for sheeping tbh. I always used targettarget never targetfocus.

Im probably missing something.

Im loving the changing leader to who you want in the middle of combat thats priceless. Now all I need to do is get good at MB PvP lol because I suck so hard. Im a PvE player usually but couldnt resist the Mb experience in the BGs. Also Talon King ikisss (sp) is kicking my ass atm so its some light relief until I face him again.

[Jafula]

I re hit my F button to get everyones focus back onto the leader and they all follow but most times when I press my dps buttons nothing happens they stand there.

Do you use focus for other things; i.e. have focus on master, then change focus for a sheep and then try and set focus to the again master?

What is your F button bound to? A macro? What does it do?

[Razman]

By f button I mean function buttons F5-F10

it does the

/focus ichina
/script SetView(5);SetView(5)
/jamba setmeasmaster all

for the main select and

/focus ichina
/script SetView(5);SetView(5)

if its not the main select, basically like you described to Bolea

[Jafula]

Are your macros falling through to the empty clause if they have a different (dead maybe) target already?

/cast [target=focustarget, harm] [] Lightning Bolt

Perhaps take [] out and see if it helps?

[Jheusse]

Just put Jamba into play last night, I have some issues that likely are covered 7 times in this thread, so don't worry about them too much, I haven't read the whole thread cover to cover as an active user yet. One example that was a little odd was when I was trying to have quest sharing and completing, it seemed that the slaves would accept the last quest I had completed when I accepted a new quest. It was like the slaves were one step behind. I'm sure I twiddled something wrong though, I'll tinker with it.

The defaults should just work without causing harm! Make sure you don't have another addon (like twobox or multiboxer) trying to do some quest automation for you as well.

I think I have questhelper in the addons folder but it's disabled on all toons. I think what it was was that I wasn't opening the questgiver window on the alts so it wasn't picking up, but would update and send an accept message later when I accepted another quest, kind of a belated update. I was able to get jamba messages on my main from the alts accepting quests that I had manually accepted on the alts and already turned in.

[Daleka]

Ok, so I looked at the master list of things that you wanted to look into adding, and didnt find it there.

I noticed that you have the ability to set keybinds to set focus/change master in jamba. One thing that would be great is a keybind to invite/disband your group. Just another thought as to something that would be a nice little addition

[Jafula]

Ok, so I looked at the master list of things that you wanted to look into adding, and didnt find it there.

I noticed that you have the ability to set keybinds to set focus/change master in jamba. One thing that would be great is a keybind to invite/disband your group. Just another thought as to something that would be a nice little addition

Is that in addition to /jamba-group invite and /jamba-group disband that you can macro up? It would save a macro (or two) and some typing. Ok, added to the list.

[Jafula]

I think I have questhelper in the addons folder but it's disabled on all toons. I think what it was was that I wasn't opening the questgiver window on the alts so it wasn't picking up, but would update and send an accept message later when I accepted another quest, kind of a belated update. I was able to get jamba messages on my main from the alts accepting quests that I had manually accepted on the alts and already turned in.

Bizarre, I assumed that it either worked immediately or not at all. I'll try questing with my master and not opening the quests npc dialogs on the slaves and see what happens...