Close
Showing results 1 to 10 of 21

Thread: I7 6 core

Hybrid View

  1. #1

    Default

    Right. I've just upgraded my system (~£800). Here are my amateur learnings

    Old
    Core2Duo
    8meg ram
    8500 Nvidia 250meg

    New
    I7 2600k
    Z68 motherboard
    16gig RAM
    880 PSU
    560TI overclocked EVGA

    First, make sure your DVD drive is compatible with the new motherboard, otherwise you'll suddenly realise after 2 hours of installation that your lovely drivers on the lovely boxed DVD's are completely useless. Not only that, but Windows won't recognise your ethernet controller. This is where work laptops + usb stick + internet are handy.

    Second, if you bought a fancy CPU cooler, don't install motherboard/graphics card/everything else, and then realise you need to take it all apart because you need to screw something on the back of the motherboard.

    If there is a large thud as you install the stock CPU cooler, sweat and drink a shot of vodka.
    If you get a headache, lie down for 30 minutes (it helped me)
    If the children start screaming, close all doors
    If the wife starts screaming, send her to bed
    Don't sneeze over the brand new motherboard
    Be organised, so you know which wire goes with which component. If said component doesn't fit, don't force it in and panic.
    Be really glad that the new graphics card comes with an adapter for VGA/HDMI.

    And finally, when you receive all these lovely components and freed up an evening of getting it ready, be glad you ordered a PSU with them and you didn't have to find a shop near work the next day to buy it overpriced.

    By the way, I can't believe I managed to 5 box on my old system. Clean 60FPS makes WoW look absolutely great (bear in mind what i'm used to)

    And thanks to everyone who helped and contributed to this site!

  2. #2
    Multiboxologist MiRai's Avatar
    Join Date
    Apr 2009
    Location
    Winter Is Coming
    Posts
    6815

    Default

    Quote Originally Posted by thefunk View Post
    By the way, I can't believe I managed to 5 box on my old system. Clean 60FPS makes WoW look absolutely great (bear in mind what i'm used to)
    That's exactly how I felt when I moved from a Q9550 system to an overclocked 2600K.

    Quote Originally Posted by thefunk View Post
    First, make sure your DVD drive is compatible with the new motherboard, otherwise you'll suddenly realise after 2 hours of installation that your lovely drivers on the lovely boxed DVD's are completely useless. Not only that, but Windows won't recognise your ethernet controller. This is where work laptops + usb stick + internet are handy.
    What was wrong with the DVD drive? And the Ethernet issue happens depending on which LAN chip the
    motherboard uses onboard. Sometimes Windows 7 can use it's generic driver and sometimes it can't. /shrug
    Do not send me a PM if what you want to talk about isn't absolutely private.
    Ask your questions on the forum where others can also benefit from the information.

    Author of the almost unknown and heavily neglected blog: Multiboxology

  3. #3

    Default

    Quote Originally Posted by MiRai View Post
    That's exactly how I felt when I moved from a Q9550 system to an overclocked 2600K.


    What was wrong with the DVD drive? And the Ethernet issue happens depending on which LAN chip the
    motherboard uses onboard. Sometimes Windows 7 can use it's generic driver and sometimes it can't. /shrug
    Exactly that bollwerk, no IDE connectors on the z68 motherboard. I also got an m4 ssd but the case doesn't have a slot for it... it will have to hang loose somewhere. At least I saved some cash

    The Windows drivers were not helpful which is why the usb stick came in handy
    Last edited by thefunk : 02-28-2012 at 08:08 PM

  4. #4

    Default

    Quote Originally Posted by thefunk View Post
    Exactly that bollwerk, no IDE connectors on the z68 motherboard. I also got an m4 ssd but the case doesn't have a slot for it... it will have to hang loose somewhere.
    You can always tape the drive down if it worries you. (Or velcro/glue/RUBBABANDS)
    Hardware Lurker

  5. #5

    Default

    Quote Originally Posted by Sajuuk View Post
    You can always tape the drive down if it worries you. (Or velcro/glue/RUBBABANDS)
    Or he can order one of these: http://www.newegg.com/Product/Produc...82E16817997010

    I've got two of them with SSDs on them in my case. But if you go with the method Sajuuk suggested, go with the rubber bands. The case I got has HDD mounts connected to rubber tubes to absorb vibrations, sadly these are not compatible with SSDs, so I had to buy these mounts. I didn't want to mount it to the bottom of the case where they designated SSD mounting, cause I wanted them closer to the intake fans for better cooling.

  6. #6

    Default

    Thanks some good ideas. It also helps if you actually plug a power lead into the SSD. As I've discovered after much "Why isn't it SHOWING the drive?!?!?!?"

    Seriously it's like the epic Izzard sketch http://www.youtube.com/watch?v=k6C_HjWr3Nk

    I'm almost disappointed I'm not getting 60 fps on 5 instances on ultra. From a price point of view. But from a playability it's AWESOME. Even spider solitaire is faster. I can't wait to try Morrowind on it

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •