[Addon] Jamba - An assistant for multiboxers. Old Thread

[quote='Razman',index.php?page=Thread&postID=125937 #post125937]Thanks for the response on losing target on master. Yes im getting a lot of warning pop up every now and again-- lost target on master-type of warning . Its seems to be just me getting this which is great because it means I did something wrong so therefore it can be fixed yay.
I set up the "setmeasmaster all" way but I havent adjusted my attack macros to have assist party1 in them anywhere. Should I be adding that line in on the attack macros or should I throw it into the follow macro ? My attack macros are all of the variety :

/cast [target=targettarget, harm] [] Lightning bolt[/quote]No, you are doing it just fine. Don't use /assist party1.

I use this setup as well:

/cast [target=targettarget, harm] [] Lightning bolt

Now as you know, your slaves all have to have the master as the target. You have two options for this.

1) Write a macro that says "/target ToonThatIsTheMaster" and bind this macro to a key.
-or-
2) use the Jamba Target key which already has made a macro for you that does a /target to your master.

The cool thing about option 2 is that when you change masters, you don't have to change the macro to target a new master (because Jamba does that for you).

Now, if you are using these macros, and when you enter combat and your toon does not have the master as a target, then none of your spells will work. Jamba-Me has an option that will warn the master if one of your toons does not have the master as its target when it enters combat. This is the warning you are getting.

So you are not doing anything wrong. Whenever you loot on a slave, the slave targets the dead mob, not the master. I think some mob actions can also cause a drop target (not 100% sure). So if this happens and your slaves drop target, you need to mash the target key again.

If you get a unit frames addon like [url='http://wowui.worldofwar.net/?p=mod&m=2855']XPerl[/url] you can set it up to show party members target.

Quote:

---

Originally Posted by 'lacitpo',index.php?page=Thread&postID=126138#post 126138

Possible Bug. Not sure if it's been reported.

When I hit my big button accept macro (listed below) I get some jamba text saying that my toons have accepted some quest, even if they didn't accept any quests.

/script AcceptGroup();
/script AcceptQuest();
/script AcceptTrade();
/script RetrieveCorpse();
/script RepopMe();
/script ConfirmAcceptQuest();
/script StaticPopup_Hide("PARTY_INVITE");
/script StaticPopup_Hide("QUEST_ACCEPT");

---

A kind person in the beta reported it to me. It's harmless (I hope, but annoying, working on finding out a way to stop it). If you run purely with Jamba - auto accept party invites, auto accept resurrect, auto accept escort quests.

you can propably drop this down to:

/script AcceptQuest();
/script AcceptTrade();
/script RepopMe();

AcceptQuest is still useful for when you share quests from your main.

Quote:

---

Originally Posted by 'Jafula',index.php?page=Thread&postID=125905#post1 25905

Hey davedontmind,

Are you happy with Frosty's proposed solution, or would you like an option where you could mute your toons guild chat? Let me know, I could make a Jamba-Mute module as zanthor has kindly pointed out it could be done.

Cheers,
Jafula.

---

I used the (obvious in hindsight) solution to add Enter and "/" to Keyclone's do-not-pass list. This has reduced my /g spamming to zero, thank goodness!

So I think a Jamba module is, for me at least, overkill. But I really appreciate the offer!

i've had a curious situation with my druid.
Basically one died, and i used the other to rez it. It automatically accepted the Rez and and popped alive, but still had the "Accept / Cancel" box for the rez >.<
clicking accept didnt do anything (toon was still alive) , i didnt get a chance to click cancel

Quote:

---

Originally Posted by 'Zub',index.php?page=Thread&postID=126181#post1261 81

i've had a curious situation with my druid.
Basically one died, and i used the other to rez it. It automatically accepted the Rez and and popped alive, but still had the "Accept / Cancel" box for the rez >.<
clicking accept didnt do anything (toon was still alive) , i didnt get a chance to click cancel

---

Ah, ok, thats because Jamba snuck in before the dialog box and accept the res. I'll add some code to hide the dialog box once the res has been accepted.

Quote:

---

Originally Posted by 'Jafula',index.php?page=Thread&postID=126192#post1 26192

Quote:

---

Originally Posted by 'Zub',index.php?page=Thread&postID=126181#post1261 81

i've had a curious situation with my druid.
Basically one died, and i used the other to rez it. It automatically accepted the Rez and and popped alive, but still had the "Accept / Cancel" box for the rez >.<
clicking accept didnt do anything (toon was still alive) , i didnt get a chance to click cancel

---

Ah, ok, thats because Jamba snuck in before the dialog box and accept the res. I'll add some code to hide the dialog box once the res has been accepted.

---

Sweet. It's no big deal really - just a bit confusing ;-)

Quote:

---

Originally Posted by 'Jafula',index.php?page=Thread&postID=126192#post1 26192

Quote:

---

Originally Posted by 'Zub',index.php?page=Thread&postID=126181#post1261 81

i've had a curious situation with my druid.
Basically one died, and i used the other to rez it. It automatically accepted the Rez and and popped alive, but still had the "Accept / Cancel" box for the rez >.<
clicking accept didnt do anything (toon was still alive) , i didnt get a chance to click cancel

---

Ah, ok, thats because Jamba snuck in before the dialog box and accept the res. I'll add some code to hide the dialog box once the res has been accepted.

---

Ooh, I see a potential problem here. I use druid battle rez for wipe recovery. Is there any way that there could be a check put in place that could prevent a repop while toons are still in combat. I don't know the best way to handle this but I like auto-repop but I also would like to be able to still use my battle rez to recover after a wipe.... hrmmm...

(in case you don't understand, the shit is hitting the fan, I spam my rez macro and it pops a battle rez on my dead priest. I wait till all toons are dead and mobs reset, and THEN repop my priest who then rezzes everyone.)

Just turn it off and then use your global accept/rez/repop/etc. macro for that one toon.

THANK YOU!!!!!

thank you for making such a great addon! im in love with it. i've just gone through the basics of it but i will also, in the following weeks, play around with some of the other options. a lot of it seem all too advanced for me now, but i guess i little trip to your site will help explain a lot of the functions. again, thank you.

I too, use this addon now, Im loving it. :) Thanks!

Just want to say this is a great Addon for multiboxer.

I just started with a 5 box warlock team. I am able to get most of the function working, however, for the life of me, I was unable to get the mod- Jamba-taxi to work. My toons only have one flight plan between Stormwind and Sentinel Hill. I read thru your intructions on the website many time to find out why this is no working

I have the check mark on the option in Jamba-taxi on my master and then click on the button "push to characters". I check and all my slaves has the same option checked in the same mod.

I have all my slave right click on the flight master to open up the window, where I can choose where to fly to, I then right click and open the same window on my master toon. I then left click on Sentinel Hill in the window. Only my master toon will fly to the Sentienl Hill and my slave will stay where they are.

Great job on this addon. Can you believe I actually had fun setting this up? The gui made it pretty simple and straight forward. A couple things I noticed.

Auto Follow after combat- Not a big deal could never get it to work on previous addons this one can't get it to work either. Installed everything went outside to fight some NPC. Backed all my toons up after we were in combat. Killed the thing ran away no one followed. Oh well not a big deal I am so used to pressing the follow button that I would feel strange without doing it.

AutoPromote Master. Tried out the flightpath guy and was happy with that. Made it into shat and sent a /promote clone1 to everyone. I was thinking that it would get to clone1 and it would push the master back to master. Which it didn't.

Everything else that I tested worked really well. This is going to make everythign I do easier and more enjoyable. No more switching 5 screens to synch up the quest logs. With the default settings there was alot of spam I thought. All usefull information but alot of it. Overall I give this a 9.5/10. You will get a 10 if you keep developing this into Wotlk.

On the taxi thing all you need is tick the box where it has the taxi reference in the set up. You also need to have your main at the time of flying set as the master. Then this is the key--All toons must have the flight map open on their screens, when the master chooses a destination they all fly there. If your alts dont have the map open they wont fly.

Quote:

---

Originally Posted by 'species6729',index.php?page=Thread&postID=126668# post126668

I have all my slave right click on the flight master to open up the window, where I can choose where to fly to, I then right click and open the same window on my master toon. I then left click on Sentinel Hill in the window. Only my master toon will fly to the Sentienl Hill and my slave will stay where they are.

---

I had similar problems with Jamba v0.1, but that may have been my configuration rather than a problem with Jamba.

With the latest version I've not experienced the problem at all. Are you using the latest version?

Quote:

---

Originally Posted by 'species6729',index.php?page=Thread&postID=126668# post126668

Just want to say this is a great Addon for multiboxer.

I just started with a 5 box warlock team. I am able to get most of the function working, however, for the life of me, I was unable to get the mod- Jamba-taxi to work. My toons only have one flight plan between Stormwind and Sentinel Hill. I read thru your intructions on the website many time to find out why this is no working

I have the check mark on the option in Jamba-taxi on my master and then click on the button "push to characters". I check and all my slaves has the same option checked in the same mod.

I have all my slave right click on the flight master to open up the window, where I can choose where to fly to, I then right click and open the same window on my master toon. I then left click on Sentinel Hill in the window. Only my master toon will fly to the Sentienl Hill and my slave will stay where they are.

---

In this screen here

http://wow.jafula.com/images/stories...a-Core-0.1.jpg

you need to make sure that all the members are ticked on your master and your slaves. This is an old screenshot, now this list is under a team tag, but you get the idea. If the checkboxes are all ticked, then the slaves will obey the master.

So check all these boxes on your main, push to characters, and then try the taxi again. Let me know if that solves your problem.

Quote:

---

Originally Posted by 'Schwarz',index.php?page=Thread&postID=126692#post 126692

Auto Follow after combat- Not a big deal could never get it to work on previous addons this one can't get it to work either. Installed everything went outside to fight some NPC. Backed all my toons up after we were in combat. Killed the thing ran away no one followed. Oh well not a big deal I am so used to pressing the follow button that I would feel strange without doing it.

---

Ok, I assume that your master is set up properly if your slaves are copying the masters quests. Maybe...

1) when "Backed all my toons up after we were in combat."- if your toons were backed up and didn't actually hit the mob, then they may not have been in combat even if your master was.

2) You have a movement key mapped that is causing the toons to move when your master moves breaking the follow.

3) You have another addon installed that is conflicting. Have you tried Jamba as the only addon?

Quote:

---

Originally Posted by 'Schwarz',index.php?page=Thread&postID=126692#post 126692

AutoPromote Master. Tried out the flightpath guy and was happy with that. Made it into shat and sent a /promote clone1 to everyone. I was thinking that it would get to clone1 and it would push the master back to master. Which it didn't.

---

When you issue the command

/jamba setmeasmaster all

on a toon; that toon will tell "all" the others that it is the new master; and if one of them is the party leader, they will promote the new master to party leader.

Quote:

---

Originally Posted by 'elsegundo',index.php?page=Thread&postID=126328#po st126328

THANK YOU!!!!!

thank you for making such a great addon! im in love with it. i've just gone through the basics of it but i will also, in the following weeks, play around with some of the other options. a lot of it seem all too advanced for me now, but i guess i little trip to your site will help explain a lot of the functions. again, thank you.

---

Quote:

---

Originally Posted by 'Jelatin',index.php?page=Thread&postID=126335#post 126335

I too, use this addon now, Im loving it. :) Thanks!

---

You are both very welcome!

Quote:

---

Originally Posted by 'Schwarz',index.php?page=Thread&postID=126692#post 126692

All usefull information but alot of it. Overall I give this a 9.5/10. You will get a 10 if you keep developing this into Wotlk.

---

Want it to be a 10! Now! ;( ?( ;)


Sure, I'll be playing Wotlk with my 5 toons. Jamba will be coming with me.

Here is an idea. Jamba-Combat: a multiboxer friendly scrolling combat text. I know there is a hack out there to spam the damage from your toons on your main screen. What I would like to see added is labels from who is doing what damage. I know some other people had wanted to see all of the damage added up and displayed for them instead of listing every attack. ie.

My preference

Shaone: lightning bolt 2100
Shatwo: lightning bolt 1500
Shathree: lightning bolt 2000
Shafour: lightning bolt 2200
Shafive: lightning botl CRIT 4000

--------------------
addition style

Party lightning bolt : 11800 (1 crit)

Quote:

---

Originally Posted by 'Schwarz',index.php?page=Thread&postID=126744#post 126744

Here is an idea. Jamba-Combat: a multiboxer friendly scrolling combat text. I know there is a hack out there to spam the damage from your toons on your main screen. What I would like to see added is labels from who is doing what damage. I know some other people had wanted to see all of the damage added up and displayed for them instead of listing every attack. ie.

My preference

Shaone: lightning bolt 2100
Shatwo: lightning bolt 1500
Shathree: lightning bolt 2000
Shafour: lightning bolt 2200
Shafive: lightning botl CRIT 4000

--------------------
addition style

Party lightning bolt : 11800 (1 crit)

---

As much as I like this idea I think that you would be best off leaving a major combat parser out of the picture until other features are locked down tight.

Awesome job Jafula! While I could multibox without Jamba, I would really hate to. Keep up the great work.

The only thing I can think of that is missing is a simple status panel like Multibox V2 has. I use it to see at a glace if everyone is following or not and see the last status message. Multibox has the last message fade to the background color, but I would honestly prefer it faded to another color. Sometimes I'm busy and don't get to it before it fades away. On the other hand, having another color lets me know it is an older message.

Quote:

---

Originally Posted by 'zanthor',index.php?page=Thread&postID=126749#post 126749

As much as I like this idea I think that you would be best off leaving a major combat parser out of the picture until other features are locked down tight.

---

Agreed. Its a lot of work to something like that. I'd like to do that very much, but start perhaps with interfacing with another mod that does that, SCT or MSBT. Anyone something like that would be cool and is on the todo list.

@zanthor: I've written the follow strobe for you; just have to run it in wow to check; hopefully I'll send it to you tonight.

Quote:

---

Originally Posted by 'wetstreet',index.php?page=Thread&postID=126785#po st126785

Awesome job Jafula! While I could multibox without Jamba, I would really hate to. Keep up the great work.

The only thing I can think of that is missing is a simple status panel like Multibox V2 has. I use it to see at a glace if everyone is following or not and see the last status message. Multibox has the last message fade to the background color, but I would honestly prefer it faded to another color. Sometimes I'm busy and don't get to it before it fades away. On the other hand, having another color lets me know it is an older message.

---

Cheers! 0.3 is Jamba GUI. If ANYONE has ideas for what to display and how to display it, please post them.

I think a minium is follow status, customisable colours, default red for not following, green for following.
The UI Error and UI Info messages you are referring to that are displayed in the GUI, I think I will just channel them through the current chat/warning system in the /jamba interface. We can tweak this system to display in a GUI if you want and fade, etc.

Do we want to integrate this GUI with toon information, like current stats, free bag space, gold amount etc, or keep it seperate?

What else do you really want to see in a GUI for your slaves?

All ideas welcome and considered.

how about a Jamba Bars, like trinity, but Jambafied <-Bush-ism

Outstanding addon...simply OUTSTANDING! :thumbsup:

Superb addon, I've just changed over to jamba dropping multiboxer, backstreet quester and simplifying some macros in the process. I do have a small feature request though.

Any chance the auto-accept quest could have an option to ONLY accept shared quests fromt he master and not directly from NPCs? Having auto-accept turned off makes collecting quests on the leader a pain as you need to accept on all slaves for every one. Having it turned on results in the slaves just grabbing the next quest in a chain from the NPC at hand in even if I am not intending to do it.

The previous addons I was using had this functionality, but of course I had to make all quest hand ins manually if there was a choice of rewards.

Finally, can anyone recommend (or better yet Jamba implement) a quest tracker that shows the progress of the entire party even if the master has completed it? QuestFu almost works, but once the master completes the tracker just changes to <done> and you can no longer follow the progress of slaves without checking their screens. My slave windows are too small to read slave trackers on their own display.

Quote:

---

Originally Posted by 'ZorbaTheGeek',index.php?page=Thread&postID=126993 #post126993

Finally, can anyone recommend (or better yet Jamba implement) a quest tracker that shows the progress of the entire party even if the master has completed it? QuestFu almost works, but once the master completes the tracker just changes to <done> and you can no longer follow the progress of slaves without checking their screens. My slave windows are too small to read slave trackers on their own display.

---

BackseatQuester IMO

GUI Ideas.

SHould be designed so that later, the addition of extra information doesn't break it. For me, options for displayed information should be as follows.

• Clear indicator of follow status. I think info on who is being followed is less important that simply an On/Off view of IF the toon is following someone.
• Option to show who is being followed?
• Bag Space
• XP as a bar and/or as a percent
• Other neato stuff I haven't thought of yet

Hope that helps

Quote:

---

Originally Posted by 'ZorbaTheGeek',index.php?page=Thread&postID=126993 #post126993

Any chance the auto-accept quest could have an option to ONLY accept shared quests fromt he master and not directly from NPCs? Having auto-accept turned off makes collecting quests on the leader a pain as you need to accept on all slaves for every one. Having it turned on results in the slaves just grabbing the next quest in a chain from the NPC at hand in even if I am not intending to do it.

---

First of all, if you have all toons doing the same quests, I'm curious as to why do you not use the default Jamba setup which is to mirror the masters quest actions? As well as this, to speed things along, I usually just accept a quest with my master and then share it with my slaves. I use my "big button" that has the AcceptQuest function in it. This way, share, hit big button, go. I don't run with the auto-accept/auto-complete on. What do you do that's more efficient than me?

How about I add another button to the Jamba-Quest GUI named "Share" - when you click this button it shares the quest with the slaves and they automatically accept it.

Brilliant mod. works well.

More feature requests.
in merchant : Auto Sell soulbound items that are unusable ( except where the usability is a lvl requirement ). I dont even know if this is possible. Maybe take a different tack and auto sell all soulbound items of a certain type ( like leather stuff ). I often take a plate item as a quest reward simply because it will give me the best cash back at a vendor. Of course if you disenchant you might wanna switch this off.

as far as the gui goes, i dont wanna see a new combat mod.

rather, i wanna see stuff that the combat mods dont show, like my XP, %of rep of whatever the last rep was that i gained.

Quote:

---

Originally Posted by 'Jafula',index.php?page=Thread&postID=127053#post1 27053

Quote:

---

Originally Posted by 'ZorbaTheGeek',index.php?page=Thread&postID=126993 #post126993

Any chance the auto-accept quest could have an option to ONLY accept shared quests fromt he master and not directly from NPCs? Having auto-accept turned off makes collecting quests on the leader a pain as you need to accept on all slaves for every one. Having it turned on results in the slaves just grabbing the next quest in a chain from the NPC at hand in even if I am not intending to do it.

---

First of all, if you have all toons doing the same quests, I'm curious as to why do you not use the default Jamba setup which is to mirror the masters quest actions? As well as this, to speed things along, I usually just accept a quest with my master and then share it with my slaves. I use my "big button" that has the AcceptQuest function in it. This way, share, hit big button, go. I don't run with the auto-accept/auto-complete on. What do you do that's more efficient than me?

How about I add another button to the Jamba-Quest GUI named "Share" - when you click this button it shares the quest with the slaves and they automatically accept it.

---

Sounds like we work in a similar way, I'm just not used to having to accept quests on the slaves when sharing. I do run mirror master to make quest hand-ins and move on to the next quest in a chain. When collecting new quests I will run the master around and share them from my quest log. It's the implementation of quest sharing that has changed from the old addon I was using as I was originally able to share and the slaves would automatically accept, they would not however auto-accept a quest when interacting with an NPC. Under Jamba these two functions are "tied together" and I'm unable to have one without the other.

With auto-accept quest on, mirror master will follow correctly until the next quest in a chain is offered at which point the slaves will auto-accept it (even if it's kill Elune with a pointed stick).
With auto-accept off I need to make at least two actions to share a quest from my masters log instead of one, and previous addons have shown that it's technically possible for this not to be necessary (although I'd not setup a "big button" I will look into that).

I'll bind the AcceptQuest function so I don't have to click in each slave window next session when I turn auto-accept off. Jamba share button would well I think.

Talking "Would be nice to have" would it be possible on quests with reward options for us to select a reward on each toon and then click "complete quest" once on the master and have all toons complete with their specific reward? Would be nice when there are follow up quests =D

Thanks again for the mod, it really is superb.

First off, I absolutely love your addon. It rocks and simplifies boxing immensely.

I'm trying to set up a leaderless system, with five toons.
When switching toons, I use my G15 to:
- Send maximizer PiP hotkey to bring that toon's window to the front.
- Target that toon with all toons and make her my focus.
- Clear target and script to make her the party leader.

In the Jamba options there's something like:
- Focus follows master and Promote new master to party leader.
I cannot seem to get this to work, but it would simplify my G15 macro (which bugs out occasionally when server latency gets high).

However, when I switch windows (without my G15 script) to a new master, Jamba still thinks the old toon is the master.
My old toon still has the focus and when I move the new toon around, the original master gets the follow broken message.

How can I make Jamba recognize that a new toon is the master?
Is there a command I can issue, so my G15 will press the Maximizer PiP command to bring the new toons window to the front,
while simultaneously sending a command (to all wow clients) letting them know which toon is the new master?







Feature request.

I'm not even sure if this is possible, but if you could have the slaves open/activate the same npc as the master clicks on.
That's the only improvement for the Jamba questing abilities I can think of; your addon does everything else wonderfully.

Absolutely great addon. Thanks a lot for making all that work available to everyone.

I was using TwoBox Toolkit until yesterday, but I got sick of people continuously asking me why I asked them to follow (TwoBox Toolkit works by issuing a /follow me command which is received by everybody around as a "Fef requires you to follow her" or something like that). Anyway, moving to Jamba, I was up and running in less than 15 minutes with the same functionality as before, and much more.

Features I love :
- Flawless (and SILENT) follow system
- Automatization of quest turn-in an flight node (I run for slave on tiny thumbnails view on the side of my screen, so this helps a lot)
- The warnings (follow broken, alt being attacked and such) are actually visible (appearing on the screen, with a warning noise, much better than chat window only)
- Auto-sell, auto-buy (replaces nicely AutoProfit I was using before)
- The Push Settings option (now that's a great idea !)

Features I would love to see :
- NPC opening automatically on alts, but I am under the understanding that this is not possible (short of using tricks like the ones used in the auto-skin macro and such)
- Automatization of talent points distributions and spell learning at the trainer (no clue how hard this could be)

Features I would like to see but I realize how vain I am for just asking :
- An exclusion list of grey items to be automatically sold. My Draenei Shaman team all wear the Blood Elves Rogue starting outfit (looks great) when in town, and I would not like the outfit to be sold. Yes, I am that shallow. ;)


That's about what I had to say, except perhaps or another big thank you !

GUI Feature...

Haze the screen red if yer dead... Like a red lense over it, make an option to set the alpha and color...

Jamba-PIP... This is something I'd use pretty heavily, but I don't know that others would... A large display overlay that shows in a bright high contrast manner what hotkey brings that window to your focus/main. The label would really need to be customizable because not everyone uses a standard keystroke... I'd like mine for example to be A B C D E and fill just under 1/4th the client window on the smaller windows...

That way at a glance I know which button brings which toon to the front, when I used to have a "main" this was less important, but nowdays with the leaderless setup that I have now I often forget that I'm on client C and have A B D and E available to swap to.

Quote:

---

Originally Posted by 'Fef',index.php?page=Thread&postID=127145#post1271 45

Features I would love to see :
- NPC opening automatically on alts, but I am under the understanding that this is not possible (short of using tricks like the ones used in the auto-skin macro and such)
- Automatization of talent points distributions and spell learning at the trainer (no clue how hard this could be)

Features I would like to see but I realize how vain I am for just asking :
- An exclusion list of grey items to be automatically sold. My Draenei Shaman team all wear the Blood Elves Rogue starting outfit (looks great) when in town, and I would not like the outfit to be sold. Yes, I am that shallow. ;)

---

Can't open NPC's, just a reality.
Talent points would be easy between classes, especially with the tag system so you could talent out 4 shaman one way and a 5th as resto, etc...

As for the keeping grays... my god man, don't you run out of bagspace? :P.

xcellent addon very well done!!

Quote:

---

Originally Posted by 'Fef',index.php?page=Thread&postID=127145#post1271 45

- Automatization of talent points distributions and spell learning at the trainer (no clue how hard this could be)

Features I would like to see but I realize how vain I am for just asking :
- An exclusion list of grey items to be automatically sold. My Draenei Shaman team all wear the Blood Elves Rogue starting outfit (looks great) when in town, and I would not like the outfit to be sold. Yes, I am that shallow. ;)

---

Thank you for using Jamba and providing feedback. I love it when you tell me the things you like about it. :)

Definitely keen to do the talent point idea at some stage. I'll add your exclusion list in 0.3.

[quote='zanthor',index.php?page=Thread&postID=12717 9#post127179]Haze the screen red if yer dead... Like a red lense over it, make an option to set the alpha and color...

Jamba-PIP... This is something I'd use pretty heavily, but I don't know that others would...[/quote]Hehe; both of those [url='http://wow.jafula.com/addons/1-jamba/14-future-jamba-releases']are on the list[/url] . How's that follow strobing working out for you? When I was playing with it, it was like my slaves were attached to my master with an elastic band. Hold down a movement key and they move away. Let go and they automatically run back. I spent too much time just doing that...

[quote='Ualaa',index.php?page=Thread&postID=127128# post127128]I'm trying to set up a leaderless system, with five toons.
When switching toons, I use my G15 to:
- Send maximizer PiP hotkey to bring that toon's window to the front.
- Target that toon with all toons and make her my focus.
- Clear target and script to make her the party leader.

In the Jamba options there's something like:
- Focus follows master and Promote new master to party leader.
I cannot seem to get this to work, but it would simplify my G15 macro (which bugs out occasionally when server latency gets high).

However, when I switch windows (without my G15 script) to a new master, Jamba still thinks the old toon is the master.
My old toon still has the focus and when I move the new toon around, the original master gets the follow broken message.

How can I make Jamba recognize that a new toon is the master?
Is there a command I can issue, so my G15 will press the Maximizer PiP command to bring the new toons window to the front,
while simultaneously sending a command (to all wow clients) letting them know which toon is the new master?
[/quote][url='http://www.dual-boxing.com/forums/index.php?page=Thread&postID=125677#post125677']Focus information is here[/url] . Short answer; don't use the automatic set focus; because it does not work outside of combat. Keep your current macros for focus. But you can change master and promote using Jamba.

You need to use

/jamba setmeasmaster all

in your switch macro.

This command tells "all" - thats all your characters that the character that issued this command is now to be the master.

Make sure all your toons have the "all" tag. If you also have the "promote" to leader option set in Jamba-Group; when that command is run, if one of your toons is the party leader and has been told about a new master, it will promote the new master to party leader.

I just set this system up last night using Jamba - exactly like you want - the key to do the pip swap and the same key also ran the /jamba setmeasmaster all macro.