Close
Page 1 of 6 1 2 3 ... LastLast
Showing results 1 to 10 of 59

Hybrid View

nodoze Input Device compatibility... 11-19-2020, 10:15 PM
nodoze Continuing from above... ... 11-19-2020, 10:16 PM
nodoze Continuing from above... ... 11-19-2020, 10:24 PM
krumbl I picked up the Aimos 4 port... 11-23-2020, 06:17 PM
bloodshot More testing results 11-20-2020, 07:08 PM
nodoze Thanks bloodshot for all the... 11-21-2020, 11:12 AM
sgtopus Orbweaver chroma Shuone 11-22-2020, 09:48 AM
nodoze Thanks for the info. Glad to... 11-22-2020, 10:16 AM
skeezy How did you get your... 11-22-2020, 01:23 PM
sgtopus Orbweaver chroma Shuone 11-22-2020, 05:16 PM
Wootenblatz Yesterday I got a 44 key... 11-22-2020, 01:43 PM
Wootenblatz After a number of unhelpful... 12-02-2020, 05:07 PM
nodoze Wootenblatz, I was unable to... 11-23-2020, 12:44 AM
nodoze I was kinda bummed that the... 11-23-2020, 12:28 PM
Wootenblatz Also, you can include the Red... 11-24-2020, 08:42 PM
nodoze Thanks and I look forward to... 11-24-2020, 08:53 PM
nodoze The initial post at the top... 11-23-2020, 06:49 PM
bloodshot After seeing Wootenblatz's... 11-24-2020, 02:22 PM
sgtopus steelseries Rival 500 mouse... 11-24-2020, 05:43 PM
bloodshot Thanks for the update! I just... 11-25-2020, 12:31 AM
bpkdasbaum FJ Gear US-108 8 ports KVM... 11-25-2020, 10:25 AM
nodoze bpkdasbaum, Thanks and I... 11-27-2020, 07:57 PM
Prega soon update my experience,... 12-01-2020, 08:59 AM
Wootenblatz Additional testing I've done:... 12-03-2020, 12:33 AM
yeaunome thanks for the breakdown, ... 04-23-2021, 01:07 AM
Arcomion Hey all. Like everyone else,... 12-03-2020, 05:28 PM
nodoze The initial post at the top... 12-06-2020, 04:35 PM
Prega some update, reverting some... 12-08-2020, 10:20 PM
Sweetfear Have you figured out a way to... 12-23-2020, 09:09 AM
Prega Today tested Corsair K95... 12-10-2020, 09:55 AM
nodoze The initial post at the top... 12-10-2020, 02:05 PM
Prega today tryed to play with... 12-18-2020, 10:49 AM
briarknit So these kvm switches are... 12-22-2020, 03:59 PM
nodoze No one said this was not... 12-22-2020, 04:56 PM
yeaunome 8 port ShuOne. Razer... 12-23-2020, 02:24 AM
nodoze Glad to hear another Aster... 12-23-2020, 01:13 PM
yeaunome Ya, exchanged my Scimitar for... 12-23-2020, 02:53 PM
Prega just got EXPERTKEYS full... 12-23-2020, 10:42 AM
nodoze That is a pretty interesting... 12-23-2020, 02:16 PM
Prega pretty interesting, i did not... 12-25-2020, 09:02 AM
Wootenblatz Today I received a Swiftpoint... 01-05-2021, 06:45 PM
nodoze The initial post at the top... 12-23-2020, 04:17 PM
nodoze Some interesting notes on... 12-24-2020, 06:28 PM
yeaunome Note that Im using the... 12-24-2020, 08:43 PM
[BR]DarkFalcon Test results with an Aimos 4... 01-05-2021, 10:56 PM
nodoze The initial post at the top... 01-06-2021, 11:02 AM
Kraxx Hi, I have an Aimos 8... 01-08-2021, 04:41 AM
Prega yes. i m using same mouse.... 01-10-2021, 12:21 PM
BZRBEE Good afternoon Guys I have... 01-09-2021, 08:23 PM
nodoze I added most of the updates.... 01-14-2021, 10:29 PM
Ellay Really appreciate everyone... 01-12-2021, 11:23 AM
nodoze The initial post at the top... 01-15-2021, 02:20 PM
jak3676 Had to come back to this... 04-16-2021, 12:22 PM
nodoze The initial post at the top... 05-02-2021, 05:19 PM
billgatedme Wondering if anybody has... 05-03-2021, 11:12 AM
nodoze That KVM switch looks to be a... 05-03-2021, 12:25 PM
billgatedme Thanks nodoze. I did not... 05-04-2021, 12:23 PM
nodoze Can a Moderator please move... 05-12-2021, 06:40 PM
kyzhuchan Apologies for the necro. But... 04-30-2023, 02:54 AM
  1. #1

    Default Input Device compatibility testing with KVM & KM switches

    Results of testing of various devices (Keyboards/Mice) with various synchronous KM/KVM switches with ratings as:
    • GOOD: Programmable macros & added functionality work as intended;
    • OK: Device functions but only with default key-binds or as a plain keyboard/mouse;
    • BAD: Device unusable or key pieces of the device do not function at all;

    Note: It is likely that the Aimos 4 port and 8 port both work identically but just in case not we will denote which devices have been tested with which switch...

    Test results with an Aimos 8 port Synchronous KM switch (also on newegg) will be preceded by an 8:
    Test results with an Aimos 4 port Synchronous KM switch will be preceded by a 4:
    Test results verified as identical on both will be preceded by an 8+4:


    How to optimize the Amios Sync KM switch;

    Test results against the ShuOne 8 port Synchronouse KM switch (HowTo optimize):

    • NOTE: See the next post below as this post exceeded the max characters allowed...
    Last edited by nodoze : 05-21-2021 at 07:25 AM

  2. #2

    Default

    Continuing from above...

    HowTo optimize the ShuOne 8.

    Notes on how to configure a mouse to control the ShuOne 8.

    Test results against the ShuOne 8 port Synchronouse KM switch:


    Test results against the FJ Gear US-108 8 port synchronous KM switch (this may be similar to the ShuOne):


    • NOTE: See the next post below as this post exceeded the max characters allowed...
    Last edited by nodoze : 05-02-2021 at 05:11 PM

  3. #3

    Default

    Continuing from above...

    Test results against the FJ Gear US-108 8 port synchronous KM switch (this may be similar to the ShuOne):


    • GOOD to OK: Corsair K70 RBG Rapidfire (source:bpkdasbaum see details);
    • GOOD to OK: Mouse Logitech G700S (source:bpkdasbaum see details);

    NOTE: The FJ Gear US-108 KVM has a 3 key rollover limit.
    Meaning when you walk forward (1), strafe(2) and rightlick mouselook(3) at the same time, the mouse will sometimes lose focus due to signal updates of continuous mouse, but catches itself again.
    When additionally pressing a spell button (4) the mouse will always lose focus.
    Last edited by nodoze : 11-27-2020 at 07:49 PM

  4. #4

    Default

    I picked up the Aimos 4 port and did some testing with good results.

    Corsair K70 works with hardware actions through KM but first needs to be plugged directly into computer running iCue software to create and store profile to keyboard. Do not use the software actions those are only available when plugged in directly to a computer running the iCue software.

    Razer Naga Trinity works if you load the profile from only one computer. Again plug directly into one computer running Synapse and set the onboard profile then unplug and quit Synapse (also important do not have running on any other computer) before plugging into KM switch. This will keep the onboard profile and send key mappings to all devices.

    edit: it seems there may be different naga trinity models, I have this model - additional info is posted here
    Last edited by krumbl : 11-23-2020 at 06:35 PM

  5. #5

  6. #6

    Default

    Thanks bloodshot for all the testing info.

    The initial post at the top of the thread has been updated with everything up to this post. Thanks for submissions thus far and please post to the end of this thread any corrections or new submissions. Please link to original sources if from other threads/sites and I will try to include the links in the summary.
    Last edited by nodoze : 11-22-2020 at 10:16 AM

  7. #7

    Default Orbweaver chroma Shuone

    Quote Originally Posted by nodoze View Post
    The initial post at the top of the thread has been updated with everything up to this post. Thanks for submissions thus far and please post to the end of this thread any corrections or new submissions. Please link to original sources if from other threads/sites and I will try to include the links in the summary.

    I can confirm using a shuone that as long as the host pc has razer synapse on it with the keybinds configured for each connected pc that the orb weaver will completely function including the d pad. You CANNOT use any of the keyboard shortcuts to turn sync off/on with shuone. Work around I found is using the d pad for team movement then using the wasd keys on orbweaver for main movement.

  8. #8

    Default

    Quote Originally Posted by sgtopus View Post
    I can confirm using a shuone that as long as the host pc has razer synapse on it with the keybinds configured for each connected pc that the orb weaver will completely function including the d pad. You CANNOT use any of the keyboard shortcuts to turn sync off/on with shuone. Work around I found is using the d pad for team movement then using the wasd keys on orbweaver for main movement.
    Thanks for the info. Glad to see that on the Orbweaver (which also worked on the Aimos).

    The initial post at the top of the thread has been updated with everything up to this post. Thanks for submissions thus far and please post to the end of this thread any corrections or new submissions. Please link to original sources if from other threads/sites and I will try to include the links in the summary.

  9. #9

    Default

    Quote Originally Posted by sgtopus View Post
    I can confirm using a shuone that as long as the host pc has razer synapse on it with the keybinds configured for each connected pc that the orb weaver will completely function including the d pad. You CANNOT use any of the keyboard shortcuts to turn sync off/on with shuone. Work around I found is using the d pad for team movement then using the wasd keys on orbweaver for main movement.
    How did you get your orbweaver to work with the shuone? Mine doesn't want to see it, on either computer.

  10. #10

    Default Orbweaver chroma Shuone

    Quote Originally Posted by skeezy View Post
    How did you get your orbweaver to work with the shuone? Mine doesn't want to see it, on either computer.

    I first configured and installed the synapse software on host pcs. I plugged orbweaver into each pc to configure the keybindings. The I disconnected it and connected the shuone. I plugged it into the keyboard port and did a test with selecting notepad if all of the keys replicated correctly. Let me know if this helps.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •