-
Need advice on using an old system.
I have an old laptop that isn't being used. It struggles to run Rift as it is but I would like it to run two clients. Absolute lowest setting and all that jazz. Listed below are the manufacturers specs. Any help would be greatly appreciated.
General
- Packaged Quantity1.0
- System TypeNotebook
- Operating SystemMicrosoft Windows 7 Home Premium 64-bit Edition
- Notebook typeMidsize,
Budget,
HD display
Processor / Chipset
- CPUIntel Pentium T4300 / 2.1 GHz
- Number of CoresDual-Core
- CacheL2 cache - 1.0 MB
- 64-bit ComputingYes
- Front Side Bus800.0 MHz
- ChipsetMobile Intel GL40 Express
Memory
- RAM3.0 GB ( 1 x 1 GB + 1 x 2 GB )
- Max RAM Supported8.0 GB
- TechnologyDDR2 SDRAM
- Speed800.0 MHz / PC2-6400
- Slots Qty2
- Empty Slots0.0
Storage
- Floppy DriveNone
- Hard Drive250.0 GB HDD / 5400.0 rpm
- InterfaceSerial ATA-150
- Storage RemovableNone
- Optical DriveDVD±RW (±R DL) / DVD-RAM - Fixed
- Optical Drive (2nd)None
- Hard drive typePortable
Display
- Type15.5 in
- Max Resolution1366 x 768 ( HD )
- WidescreenYes
Audio & Video
- Graphics ProcessorIntel GMA 4500MHD
- Memory Allocation TechnologyDynamic Video Memory Technology 5.0
- Total Available Graphics Memory1341.0
- MB
Nost.
-
Multiboxologist
What advice are you looking for? You just make a statement about how badly RIFT runs on your old laptop and list its specs.
Have you tried to run two RIFT clients at the lowest possible settings? I can't imagine that that laptop is going to be able to comfortably run two RIFT clients.
Posting Rules
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Connect With Us