Close
Page 1 of 2 1 2 LastLast
Showing results 1 to 10 of 13
  1. #1
    Member luxlunae's Avatar
    Join Date
    Aug 2008
    Location
    Bay Area, CA
    Posts
    1431
    Blog Entries
    37

    Default Single box freezing issue. New computer

    I have a problem that one of my boxes keeps freezing in instances. Tank box, nearly always on trash. The frame rate isn't dipping first or anything. The cpu is spread evenly across all characters (per the default settings) and the only other difference between the tank box and the slaves is the graphics settings. Running on 16 gigs of memory, nowhere near maxed out, and using gtx 570 which doesn't seem to be taxed until the moment that one box crashes. that box cannot be closed except through the processes tab of task manager.

    My tank settings are hardly maxed out either:

    Code:
    /console groundEffectDensity 15
    /console groundEffectDist 1
    /console horizonfarclip 2112
    /console farclip 1250
    /console skycloudlod 1
    /console smallcull 1
    /console skycloudlod 1
    /console projectedTextures 1
    /console waterDetail 2
    /console rippleDetail 2
    /console reflectionMode 3
    /console particleDensity 80
    /console weatherDensity 1
    /p High Graphics
    versus

    Code:
    /console groundEffectDensity 16
    /console groundEffectDist 1
    /console horizonfarclip 2000
    /console farclip 1000
    /console skycloudlod 1
    /console projectedTextures 0
    /console waterDetail 0
    /console rippleDetail 1
    /console reflectionMode 0
    /console particleDensity 80
    /console weatherDensity 0
    /p Low Graphics
    Basically I have a new machine that shouldn't have any problems... and it doesn't' except for these crashes.

    Help!

    Edit: one other thing, my running load for the cpu is abot 35% normally, with each box taking 5-8%... when the tank box freezes it shows as 24-25% on the task manager.
    Last edited by luxlunae : 12-17-2012 at 10:57 PM

  2. #2
    Member
    Join Date
    Sep 2008
    Location
    Calgary, AB and Vancouver, BC
    Posts
    7638
    Blog Entries
    2

    Default

    I don't think it is the issue necessarily, but what does GPU-Z show as the utilization on the graphics card?
    Resource Monitor doesn't show temperatures or anything about the video card.
    EverQuest I: Bard / Enchanter / Druid / Wizard / 2x Magician.
    Diablo III: 4x Crusader & 4x Wizard.

    My Guide to IS Boxer http://www.dual-boxing.com/showthread.php?t=26231 (somewhat dated).
    Streaming in 1080p HD: www.twitch.tv/ualaa
    Twitter: @Ualaa


  3. #3

    Default

    try disabling the Jamba - Item Use , just started gettin freezing issues myself, only when i start attacking things my computer gets these weird spikes and freezes up on and off/client crashes, tried turning on and off all the different addons under jamba and came to found it was being caused by the - Item Use bar some reason. see if that works if your runnin jamba
    DARKSPEAR Alliance <Legíon of Boom>
    30 BOX DEATH DEALER. Win:Win

  4. #4
    Member luxlunae's Avatar
    Join Date
    Aug 2008
    Location
    Bay Area, CA
    Posts
    1431
    Blog Entries
    37

    Default

    With half my team in stormwind and two in shrine (on my medium to high pop server) the gpu load is 32% and the fan speed is 45% and the temp is 66 celsius. I'll keep gpuz running and note if I see any spikes if it crashes again.

    Thanks for the ideas guys! Nothing as disappointing as thinking you have it figured out and then NOPE.

  5. #5
    Member luxlunae's Avatar
    Join Date
    Aug 2008
    Location
    Bay Area, CA
    Posts
    1431
    Blog Entries
    37

    Default

    Ok that box just went down again with the gpu operating at 35% (I have noticed that it goes up to 50% while questing). Jamba item-use disabled. Physical memory at 60%, Cpu usage 60%, with that box frozen at 25% cpu.

  6. #6

  7. #7
    Member luxlunae's Avatar
    Join Date
    Aug 2008
    Location
    Bay Area, CA
    Posts
    1431
    Blog Entries
    37

    Default

    How do you tell if its currently running in dx11 versus dx9? my isboxer has world of warcraft default profile selected rather than dx9 or 11.

    I also discovered that the fifth box was running texture filtering at 4x while the others are all bilinear so I'm going to bump that down and see if it does the trick.

  8. #8

  9. #9

    Default

    i had read posts about people getting these random freezes.. never happened to me until last week. I had one account that would freeze, at random. I had not knowingly changed any settings, so I was clueless. I did everything recommended, but ignored DX11/9 stuff because i KNEW i had it set to DX11. Well i would have saved a lot of time.. that one account had been switched to DX9 somehow... put it back to DX11 and no more issues 8)
    Currently 5 Boxing 5 Protection Paladins on Whisperwind Alliance
    The Power of Five!!! ( short video )

  10. #10
    Member luxlunae's Avatar
    Join Date
    Aug 2008
    Location
    Bay Area, CA
    Posts
    1431
    Blog Entries
    37

    Default

    Bah it crashed again so it wasn't the 4x texture thing. I'm hesitant to change all of my boxes from dx11 when whatever is going wrong is only crashing one box. I discovered that this character had the shadows on something other than fair so now I've turned her shadows all the way down.

    edit: they are all running dx11
    Last edited by luxlunae : 12-18-2012 at 06:37 PM

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •