Close
Showing results 1 to 10 of 47

Hybrid View

  1. #1

    Default

    here it goes...

    http://privatepaste.com/6c342197ed

    changes
    added keymaps and spec control for destro/demon warlock frost/blood dk
    tweaked with IWTs to help prevent runarounds and runoffs.
    moved low/high graphics to a button since it was causing lockups when incorporated to master switching
    added assist FTL to jamba item to reduces some keypressses
    added assist FTL to others move left, right, up, down
    added wide camera view to slaves when i use others move forward so they can see better if mobs are in range. (based on when mobs hp bar becomes visible they can be engaged by most ranged spells)
    there alot of old stuff i left in there like differnt primary dps sequences i kept that in there mostly as a libary so i dont have to go searching through old backup files for macros or mapkeys i wont to reincorperate later. some of these macros are not optimum and or may not work at all.
    example
    lax version
    Code:
    /stopmacro [target=target,noexists] [noharm] [dead]
    /startattack
    /click ErrorsOFF
    
    
    /cast Blood Boil
    
    
    /click ErrorsON
    jack version
    Code:
    /click ErrorsOFF
    
    
    /stopmacro [target=target,noexists] [noharm] [dead]
    /startattack
    /cast Blood Boil
    
    
    
    
    /click ErrorsON
    can the following be used as a /click? i saw a "PreAttack" click that i stole from an isboxer forum thread a long time ago.
    Code:
    /stopmacro [target=target,noexists] [noharm] [dead]
    /startattack

    bugs

    when i push the hotkey shift Y for dismount it tries to also do the change spec macro
    /equipset Primary
    /usetalents 1
    using alt-F12 as the keycombo

    i've already change the keycombo as a poss fix but the problem persisted. the pre-export scan didnt raise any flags. i dunno wutz wrong.. lol

    future goals
    change the colors for popuptexts using colors
    using colors that can be seen on most backgrounds like green, yellow, and orange as opposed to colors like red and purple
    using colors to indicate off/on state without reading ie green for ON


    moar addons?
    it would be great if one of you could recomend me one so i dont spend too much time testing out which one is boxer friendly.
    looking for an addons that consodates windows into tabs.
    looking for addons that tells me which quest reward can resell for the most money. there are alot of them available but.. which one do you use?

    click bars for:
    everything?
    you guys that do this where do you get your images/graphics clip-art stuff?
    how do i perma turn off the graphic for the stupid formation keymap click bars at startup without ripping them out of the profile permanantly?
    its a nice lil sample but its the two states that i know without a reminder are on/off ect

    activate maps ? shift+alt+M? those of you that changed the hotkey to be more ergonomic what key did you end up with? mine is \ but its still somewhat of a reach but at least it doesnt have a modifier in it. im asuming most of your hotkeys are on the left side of the keyboard.

    i plan on making an overview guide in the near future on movement/iwt to compliment the other iwt guides.
    Last edited by JackBurton : 06-17-2012 at 04:38 AM
    Just remember what ol' Jack Burton does when the earth quakes, and the poison arrows fall from the sky, and the pillars of Heaven shake. Yeah, Jack Burton just looks that big ol' storm right square in the eye and he says, "Give me your best shot, pal. I can take it"

  2. #2
    Member Alge's Avatar
    Join Date
    Nov 2010
    Location
    Sydney, Australia
    Posts
    322

    Default

    Quote Originally Posted by JackBurton View Post
    bugs
    when i push the hotkey shift Y for dismount it tries to also do the change spec macro
    /equipset Primary
    /usetalents 1
    using alt-F12 as the keycombo

    i've already change the keycombo as a poss fix but the problem persisted. the pre-export scan didnt raise any flags. i dunno wutz wrong.. lol
    The problem is that you have 4 Mapped Keys (Dismount, Secondary Spec, Primary Spec and PVP Spec) all with the same Hotkey (Shift+Y) in your Equipment Key Map, so when you press Shift+Y it tries to do them all.

    how do i perma turn off the graphic for the stupid formation keymap click bars at startup without ripping them out of the profile permanantly?
    Select the Broadcast Click Bar in the upper pane of ISBoxer and then delete each Character Set assigned to that Click Bar (only within the Click Bar)
    Last edited by Alge : 06-17-2012 at 06:37 AM

  3. #3

    Default

    Quote Originally Posted by JackBurton View Post
    added assist FTL to others move left, right, up, down
    Adding assist to movement? That's an odd one... It could also have unintended consequences, since movement requires the Hold option. This means from Slot 1 if you're moving guys with W, they hold Shift+Backspace AND W, so it will be interpreted as Shift+W. Well that's fine but now consider the other Slots and FTL modifiers.... if you're in slot 3, and move guys with S (hold Alt+S in your 3rd window), now it holds Ctrl+Backspace+S so the game may interpret it as Ctrl+S. And so on. Ctrl+S I believe is a default WoW hotkey to toggle sound....

    I would probably drop the assist from those.

    example
    lax version
    Code:
    /stopmacro [target=target,noexists] [noharm] [dead]
    /startattack
    /click ErrorsOFF
    
    
    /cast Blood Boil
    
    
    /click ErrorsON
    jack version
    Code:
    /click ErrorsOFF
    
    
    /stopmacro [target=target,noexists] [noharm] [dead]
    /startattack
    /cast Blood Boil
    
    
    
    
    /click ErrorsON
    can the following be used as a /click? i saw a "PreAttack" click that i stole from an isboxer forum thread a long time ago.
    Code:
    /stopmacro [target=target,noexists] [noharm] [dead]
    /startattack
    No, when I put those in another macro and used /click I found it would not work as desired.

    By the way I would not put /click ErrorsOFF before /stopmacro because it will keep errors OFF if the /stopmacro line hits (because the macro stops, /click ErrorsON will never hit). Put it right before /startattack but AFTER the /stopmacro and it should properly handle all the error messages but without incorrectly sticking off.



    click bars for:
    everything?
    you guys that do this where do you get your images/graphics clip-art stuff?
    how do i perma turn off the graphic for the stupid formation keymap click bars at startup without ripping them out of the profile permanantly?
    its a nice lil sample but its the two states that i know without a reminder are on/off ect
    I'm not a huge fan of Click Bars for everything, but then again I don't have 60 individual Hotkeys to remember for each individual function built into the game

    There's 2 main reasons to use a Click Bar for something. That's A) to remember fewer Hotkeys, and B) to have a visual indicator. A lot of people will use original ability graphics; for some people this means take a screenshot and copy/paste stuff out of it into a separate image; for some people this means go to fan sites or resources like wowwiki and right click images and click Save As (note that depending on their license, you may not be allowed to re-distribute those images, but you can save them and use them for your own configuration no matter what); I believe there's also wow interface kits that will extract the images from the game data files.

    If you're thinking about showing cooldowns from the actual ability button (some people do ask about this), then the answer is to use a Video FX view of the actual ability button, over the Click Bar. This only works when the ability button is in a different window though, since Video FX cannot work from the original window.

    For a lot of things you might consider a Click Bar button for, a simpler solution (not "the best" solution, but for how easy it is to do this method it's great) is to use the same visible Action Bar button for some ability on each guy, and put a Repeater Region over it. That way, just clicking on the Action Bar button is sufficient. I do many uncommon things like this so that I don't need special configuration or Hotkeys for various non-combat abilities. Plus the Repeater Region can cover multiple Action Bar buttons in the same area.

    activate maps ? shift+alt+M? those of you that changed the hotkey to be more ergonomic what key did you end up with? mine is \ but its still somewhat of a reach but at least it doesnt have a modifier in it. im asuming most of your hotkeys are on the left side of the keyboard.
    Personally I use Shift+Alt+M or the Click Bar. Also, personally, I avoid configuring any ISBoxer Hotkeys on keys that I use for typing, so my solution probably isn't the right one for you. My hotkeys, quite purposefully, all either have a modifier (mainly suitable for things I don't need to hit or rotate through quickly), or are on non-typing buttons (e.g. on a separate input device like my Logitech G13). If you need to do it often, it sort of just needs to be easy to reach; Alt+Z isn't much harder to do than just Z for example (Alt and Z being basically next to each other) and you shouldn't need to hit it in a pinch unless you make a habit of stopping to type during combat.
    Lax
    Author of ISBoxer
    Video: ISBoxer Quick Start

  4. #4
    Member Alge's Avatar
    Join Date
    Nov 2010
    Location
    Sydney, Australia
    Posts
    322

    Default

    Quote Originally Posted by Lax View Post
    There's 2 main reasons to use a Click Bar for something. That's A) to remember fewer Hotkeys, and B) to have a visual indicator.
    I'd add ... C) to enable you to do 2 actions at once, such as healing a character with your right hand using the mouse and a Click Bar while DPSing with your left hand using the keyboard. This is the main motivation behind the various Click Healing setups that use a Click Bar.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •