Close
Showing results 1 to 8 of 8

Thread: Formation?

Threaded View

  1. #4
    Member
    Join Date
    May 2011
    Location
    uk england
    Posts
    95
    Blog Entries
    1

    Default

    Hi Riico

    part of the fun ( challenge etc) of this multiboxing thing is discovering ways to do these type of formations etc..and mostly it comes down to keybinds etc..

    i'll put here a link to my very old old site that i made years ago..when i had not long started..and ignore most of my macros etc..as these were ancient and i was just starting out.

    http://www.freewebs.com/multiboxing/macros.htm

    .but...i did put up on this page i link a couple of short vids where you see..follow normal and follow each other..

    where follow normal everyone bunches up and follows master...or everyone follows the next slave..and this makes a spread follow

    and also a short vid at the bottom..that shows a master in the center then the slaves move to the side in 2 steps to form a line

    the way to do this..bearing in mine i used keyclone at the time too..but that dosent effect the result..

    note first press walk toggle to make this work best..in run mode they spread to far..

    main master uses w,s,a,d to move..slaves have wsad unbinded..and they use arrow up,arrow down,arrow left and arrow right to move..

    this way..when they follow and you stop and get them into a formation..main can stand still..while slaves can be moved with arrow keys..or ( i use 5 to multibox) all can use arrow keys to move at same time..

    to spread in a line...i had my keybinds set as the following...out of 5 i run my main as the 3rd ...main 3rd..2,1,4,5..always have lol

    so main is in the middle..i then press insert and delete which are bound to slave 2 and 1 ..but unbinded to master and 4 and 5

    when pressed this makes 2 and 1 step 1 step away from main to the side...so you get this...1 3 2

    then i pressed [ key on 4 and ] on 5.these are unbinded on the others ..and you have to press 2 times or more so they spread away from main further..so you get...4 1 3 2 5

    and this gives you the line out..you can then press arrow keys to move slaves in line with main..and you can then press on arrow keys and all will run forward in this formation..

    this seems a huge explanation for something we do without thinking..but i try to explain it the best i can..


    heres the link or ill try link the vids here..

    spread sideways video



    normal follow and spread follow

    hmmm cant get the second one to show here..so here is link on old website..if you wish to view..

    http://www.freewebs.com/multiboxing/macros.htm


    ps..you can run in line spread a bit..but when you turn..it may come undone..i mainly used it for lining up at vendors or ah ..or for when you get those people never seen multiboxing and ask you to do a bit of a display lol..
    anyway hope that helps a little riico
    Last edited by honeypot2011 : 09-23-2011 at 08:15 PM

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •