Quote Originally Posted by 'Darm',index.php?page=Thread&postID=42057#post4205 7
Thank you so much! That did the trick.

For future reference, in case anyone else runs into this problem:

These are the steps to get WASD (or other movement keys) working correctly with X-Keys Pro.

1. Open MacroWorks editor (or flip the switch on the side of the unit)
2. Hit the key on the X-Keys Pro that you want to program.
3. Select "On Release" under the Insert menu, this will create two areas for text to be entered.
4. In the top area, enter the movement key (example: w), and then select "Key Down" from the Insert menu. This will place a little downwards arrow after the letter "w". Note: the Key Down command must come *after* your text.
5. In the bottom area, enter the SAME movement key (example: w), and then select "Key Up" from the insert menu. This will place a little upwards arrow after the letter "w". Same warning here about making sure the commands are in the proper order.
6. Close MacroWorks editor
7. Movement key should work now, just as if you are using it with a conventional USB keyboard.



^Tried this and can't get it to work. When I hit the key I programmed (Q) I get a "Caps lock on" message and the button doesn't repeat. Any ideas?