setting up CC in isboxer

[zenga]

For my new 5x frost mage team I've made a CC (polymorph) setup in isboxer, But I guess I did it a bit too complicated, and thus asking if there is a simplified version of this. I use the build in FTL setup from isboxer for everything btw.

A] / (on numpad) is bound in isboxer to target the leader of the party and broadcast to all slaves

B] Have 5 buttons on my G13 game pad:

button1 -> sends ctrl/shift/num1, a new mapped key in isboixer send shift+1 to char in slot 1
button2 -> sends ctrl/shift/num2, a new mapped key in isboixer send shift+1 to char in slot 2
button3 -> sends ctrl/shift/num3, a new mapped key in isboixer send shift+1 to char in slot 3
button4 -> sends ctrl/shift/num4 , a new mapped key in isboixer send shift+1 to char in slot 4
button5 -> sends ctrl/shift/num5 , a new mapped keyin isboixer send shift+1 to char in slot 5

each char has this same macro on its actionbar that corresponds with shift+1:

/focus targettarget
/stopmacro [@focus, noexists][@focus, noharm]
/run SetRaidTarget("target", 2) (the raid icon varies per macro of course)
/emote sets star on %t

-> so all slaves target the leader at this point, I click on mob that needs to be cc'd, and click corresponding button on G13, so that slave sets that mob as focus and puts a raid icon on it. stopmacro is fallthrough in case the leader has no target or when it's a friendly player. click next mob i want to cc, click button, and that slave puts the next mob in focus + different raid marker ... x5

C] On G13 I have another button that sends shift+2, isboxer sends it to all toons, and it triggers this macro on the actionbar for everyone

/stopcasting [@focus, exists, harm]
/cast [@focus, exists] polymorph

The toons that had their focus set will now CC it and keep their focus till mob is dead or I clear it. Stopcasting obviously to resheep if needed, but only when focus is set to an enemy.

D) On G13 I have another button that sends shift+3, isboxers sends it to all toons and it triggers a simple /clearfocus macro to reset everything

...

So in short:
5 toons target me
5 buttons to set the focus for the respective toons
1 button to cast polymorph to all toons who have focus

besides this I have a simple roundrobin button to cast polymorph, on the leaders target (less hassle, better for a single mob or pvp)

TLR

is there a simplified way to do this with isboxer?

cheers
z

[Toned]

I use an actiontargetgroup cc

I have 1button that sends an FTL focus current windows target. This is on round robin for the target group.
Then I have 1 button that is /cast [@focus] ccspell

[zenga]

lol that is indeed quite a simplified version
was unaware that isboxer has a 'focus current windws target' functionality

cheers

[Ualaa]

You have:
- FTL Target Me
- FTL Assist Me
- FTL Follow Me

You could build it into the same macro.
One step.
- FTL Assist Me
- Send Keybind to Slot/Character for CC Macro.

You can do it in two mapped keys or two steps on one mapped key.
Key A, or Step 1.
- FTL Assist Me
Key B, or Step 2.
- Send Keybind to run the CC Macro.
If you went this route, it could execute a step on press or release.
And the delay between acquiring target and setting the target as the focus, would account for latency.

You could have all your mages in an Action Target Group.
Instead of Send Keybind to Slot/Character, use the ATG as the target.
And round-robin within target group.

There isn't something for your slaves to focus the target of the current window.
But you can have your slaves target what you're targeting now.
And once you have assisted, set that as your focus.

[zenga]

What is the advantage of an action target group round robin when I play 5 mages all of the same spec? I guess only when I was to replace 1 of the toons for a tank or healer so the round robin would not iterate through tank/healer?

[Leovindica]

Zenga, you could check this thread. http://www.dual-boxing.com/showthread.php?t=34218

[Ualaa]

I have two mapped keys for Death & Decay.

One of them sends the keybind to all of my DK windows (the DK ATG).
And it has a Send Next Click action, to all of the DK's too.

The other is set up to send the keybind to the ATG.
With the check box to round-robin, within the group.
And it also does the Send Next Click action, same target group.
Also with the box checked for round-robin within the group.
Because both the Send Keybind and Send Next Click use the same ATG, the order syncs up with both.
End result is a mouse-broadcast Death & Decay, for a single toon at a time.



You could use that for anything you want your toons to do in sequence.
One step will have them round-robin within the selected target group.
Rather than needing to have five steps, with a different target on each step.

If you were to mix and match toons.
You could add a tank and healer to the team/character set.
And just remove two names from the ATG.
Your round-robin within group (ATG of mages as the target), would work without further modification.

If you take a look at Aragent's thread (http://www.dual-boxing.com/showthread.php?t=42878), it attempts to provide macros for groups of toons.
You could put all of your Elemental Shammies into an Elemental Shaman ATG.
Do the same with all of your Balance Druids, etc...
And mix and match your teams however you want to do them.
Then have a generic keymap that applies to all of the teams (drag it onto the character set).
Or move the mapped keys onto the General Keymap, which also applies to all teams.
Then by virtue of being in the correct ATG, those toons run the correct macro or set of macros when you spam your DPS.



With all five being the same, there is less benefit from ATG's then if there were differences.
You might want to manually control one, and have the four slaves in an ATG; I could see this in particular if you were playing a 5x melee team, but did not want your main to IWT.

If you were to spec one Frost, and four of them Arcane... you might then want separate ATG's, because each spec has different abilities.

If I were to run 3x Frost and 1x Unholy DK's, with my Paladin, an ATG for the Frost DK's, which would round-robin Hungering Cold within that specific ATG would be a decent option.



In the past, I've experimented with two Action Target Groups for PvE play.
The team was, Prot Pally, Destro Warlock, and 3x Caster Shammies.
One of the Shammies was dual-spec Resto/Elemental, the other two were straight Elemental.

ATG A - Certain healing keybinds would go to all of my Shammies.
ATG B - Those same healer keybinds only go to the Resto Shaman.
Then have a two step mapped key for toggling my state.
Step 1 -- Adds all shammies to ATG A, and removes the Dual-Spec shammy from ATG B.
Step 2 -- Removes all shammies from ATG A, and adds only the Dual-Spec shammy to ATG B.

End result, Dedicated Healer mode = only that one Shaman does healing, the other two were straight DPS... receiving my one-button spam click castsequence, even when I pushed a button that would normally be a heal.... but DPS mode = all shammies were DPS, none are the dedicated healer, so Lesser Healing Wave and Chain Heal go to all shammies.

[zenga]

@leovindica

- yeah in that thread you linked I see mostly setups that look like mine
- see you are playing on kul tiras eu as well (i play horde however)

@ualaa
Cheers for the write out/up. I clearly see the advantage of ATG's. However think that i'll stick to my cc setup for now, just incorporate the step where all slaves have to target me into the acquire focus step. I'm not short on buttons anyways since I use G13/G11 + naga, and it only takes 1 spot on my actionbars. It's easy to translate this to a shaman team or mix in later any other classes. And I prefer the each button per toon over a roundrobin for this as I'll be lost at which step in the loop I'm at. (this next to a simple round robin poly button for quicker cc where I don't mind who is cc'ing).

[Leovindica]

Zenga, I know you are on KT;-) I have encountered 2 other boxers on alliance side. 'We Are One guild' and another new boxer. We Are One I haven't seen for a while now, he is on these forums aswell.

[Sam DeathWalker]

Not sure if stuff has changed a lot but (this before round robin added to isboxer)

http://www.dual-boxing.com/showthread.php?t=33327