Mecurio's Cataclysm Multiboxing Macros

[Mercurio]

daanji,

Great, I wasn't aware that having Lava Burst as a /cast wouldn't crater the macro. Since Lava Burst is an important part of Ele Shaman DPS, I'm sure having it cast on every cooldown (as compared to *almost* on every cooldown) is better for your shaman's DPS.

However, there are a couple of nice things about having Lava Burst split into the proc macro: it causes your shammies to drop their totems every once in a while (nice for movement fights) and more importantly, will cause your shammeis to ensure that their searing totem is always up. Not having a fire totem up would be a have a large impact on your team's overall DPS. If you use the current proc macro you will mindlessly always have the totem buffs even though you suffer a bit of a DPS loss on your Ele Shaman.

So the question is, can we figure out a good way to use your sequence macro with Lava Burst in it (for better Ele Shaman DPS) and combine it with a different proc macro that automatically casues you to refresh your totems every so often and your fire totems every 60 seconds? Would something like moving Elemental Mastery into the proc macro work? The new proc macro would look like:
/castsequence reset=combat/8 Call of the Elements,Elemental Mastery,Searing Totem,Elemental Mastery
The normal cooldown on Call of the Elements is 3 minutes. This is reduced by the Feedback talent by 3 sec per cast of Lightning Bolt or Chain Lightning, but I don't think this is enough to get the cooldown near 1 minute (what we'd like it to be so totems are refreshed every minute by the above proc macro). I'm out of town for the holidays or I'd test some things out.

If you'd like to do some testing on this and figure out a nice solution, I'd be happy to update the master post accordingly. In the meantime, I will probably keep my proc macro as it is so the totems are managed automatically.

[naPS]

The problem with automatically dropping the fire totems is that it will cause your Fire Elemental to despawn if you currently have one up. And the Fire Elemental is a huge part of the shammy DPS sequence, and something you don't want to overwrite if possible.

[Aragent]

The problem with automatically dropping the fire totems is that it will cause your Fire Elemental to despawn if you currently have one up. And the Fire Elemental is a huge part of the shammy DPS sequence, and something you don't want to overwrite if possible.

I would then Recomend not adding a Fire totem to Call of the Elements and have a added /cast for the Fire Elemental in proc so it will be cast when its timer is up.

[naPS]

I would then Recomend not adding a Fire totem to Call of the Elements and have a added /cast for the Fire Elemental in proc so it will be cast when its timer is up.

But the point of Mercurio's post was so that you didn't have to manually re-cast the Searing Totem, which that would effectively be doing.

[Hyper]

I then created a DPS Sequence Macro that I attached to "2" and a DPS Proc Macro that I attached to ";" for each type of DPS.

Please forgive me for sounds newbish. I believe I understand the the overall concept pretty well, I can follow the directions to creating the Key mappings in ISBoxer fairly well, but the part that is confusing me is putting a macro on the ; key.

The main spam key on 2 is not an issue. Use the in-game macro tool, type the text of one (or several) of the wonderful macros supplied in this thread, then drop the icon on the number 2 of my action bar.
Now, after I use the same in-game tool to make the Proc macro, just how do I bind that macro to the ; key?

Edit:
After reviewing previous posts, I see your reply to someone else's issue stating that you needed to bind the ; key to some button on some actionbar. I was hoping that there was some way to create a macro and assign it to a key without it taking up actionbar space.

[Nuson]

Can you post a macro for a fury warrior?

[Aragent]

Please forgive me for sounds newbish. I believe I understand the the overall concept pretty well, I can follow the directions to creating the Key mappings in ISBoxer fairly well, but the part that is confusing me is putting a macro on the ; key.

The main spam key on 2 is not an issue. Use the in-game macro tool, type the text of one (or several) of the wonderful macros supplied in this thread, then drop the icon on the number 2 of my action bar.
Now, after I use the same in-game tool to make the Proc macro, just how do I bind that macro to the ; key?

Edit:
After reviewing previous posts, I see your reply to someone else's issue stating that you needed to bind the ; key to some button on some actionbar. I was hoping that there was some way to create a macro and assign it to a key without it taking up actionbar space.

If your trying to doit inside wow it has to be assigned to two diferent keys, Mercurio guide shows how to make the 2 step process on one key via Isboxer,

I hope that Helps

[daanji]

daanji,

Great, I wasn't aware that having Lava Burst as a /cast wouldn't crater the macro. Since Lava Burst is an important part of Ele Shaman DPS, I'm sure having it cast on every cooldown (as compared to *almost* on every cooldown) is better for your shaman's DPS.

However, there are a couple of nice things about having Lava Burst split into the proc macro: it causes your shammies to drop their totems every once in a while (nice for movement fights) and more importantly, will cause your shammeis to ensure that their searing totem is always up. Not having a fire totem up would be a have a large impact on your team's overall DPS. If you use the current proc macro you will mindlessly always have the totem buffs even though you suffer a bit of a DPS loss on your Ele Shaman.

So the question is, can we figure out a good way to use your sequence macro with Lava Burst in it (for better Ele Shaman DPS) and combine it with a different proc macro that automatically casues you to refresh your totems every so often and your fire totems every 60 seconds? Would something like moving Elemental Mastery into the proc macro work? The new proc macro would look like:
/castsequence reset=combat/8 Call of the Elements,Elemental Mastery,Searing Totem,Elemental Mastery
The normal cooldown on Call of the Elements is 3 minutes. This is reduced by the Feedback talent by 3 sec per cast of Lightning Bolt or Chain Lightning, but I don't think this is enough to get the cooldown near 1 minute (what we'd like it to be so totems are refreshed every minute by the above proc macro). I'm out of town for the holidays or I'd test some things out.

If you'd like to do some testing on this and figure out a nice solution, I'd be happy to update the master post accordingly. In the meantime, I will probably keep my proc macro as it is so the totems are managed automatically.

Thanks for the feedback! I usually drop my totems using separate keys for each situation. I have general purpose buff keys, which causes the shamans to drop their totem, do water / earth / lightning shield, and buff their weapons. The other classes do their buffs as well. I also have a separate key for Fire / Earth Elemental. I also have a separate key for magma, nova and searing totems. Finally, I have a key for pvp that drops stoneclaw(it is glyphed for pvp), healing stream, and grounding totem when I get into trouble.

I haven't really considered adding totem drops as part of my standard shaman rotation, especially searing totem as that can pull mobs that I don't want. However, I see the value in it since it less to do manually, which I'm sure is a godsend in the 10-mans you do

[naPS]

do you have one set up for a disc priest by chance?

I've been using ISBoxer and the {SLOT} macro functionality for my holy / disc priest, and it's working great.

For bubbles, I basically set up a Mapped Key with 6 steps. The first step has the cast sequence for the disc or holy priest, and the next 5 steps have the Shields. For the shield cast I used

/castsequence [target={SLOT1}] reset=30 Power Word: Shield

... and then step through the SLOTs in the next 4 steps.

My five man team stays all nice and bubbled and I've had zero problems facerolling content with this setup.

Since I can always drink in-between pulls while I'm looting, I'm not terribly concerned about mana conservation at this point. Cata may change that, but for now it's working great.

[Tweedle]

If you are using Lax's "FTL DPS Keys" keymap, you already have a "DPS 2" mapped key that simply sends the keypress of a "2" to all windows when you press "2".
Create another mapped key within "FTL DPS Keys" called "2 Step" that is also called when you press "2" but has two steps - the first sends "2" to all windows (exactly as above), while the second step sends ";" to all windows.

Now all you need to do is set up a new mapped key in your "Control" key map. I called mine "2 Step Toggle" and associated it with the "Insert" key. It will have two steps in it.
Step one has 3 actions:
1) A new mapped key state action (one of the options when you add a new step) that toggles the "DPS 2" mapped key within "FTL DPS Keys" to On
2) A new mapped key state action that toggles the "2 Step" mapped key within "FTL DPS Keys" to Off
3) A popup text with a message like "2 Step Turned OFF"
Step two has 3 actions:
1) A new mapped key state action that toggles the "DPS 2" mapped key within "FTL DPS Keys" to Off
2) A new mapped key state action that toggles the "2 Step" mapped key within "FTL DPS Keys" to On
3) A popup text with a message like "2 Step Turned ON"

That's it! Use "Insert" to turn your toggle on or off.

Attach the sequence macros to your "2" key in WoW and the proc macros to your ";" key in WoW. Done.

(Of course, you may want to associate your proc macros with something other than ";" - Pinot used "9" and sent the 2nd step of his "2 Step" mapped key action to "9".)

Also, Va1entines was good enough to post a couple of screenshots of this set up in ISBoxer (thanks Va1entines!):


I understand how this is supposed to work but am new to boxing and newer to ISBoxer, were in any of this does it show how to set the ";" key in isboxer? I'm having a real bad time at trial and error tryig to figure it out myself.