Cataclysm Multiboxing Macros

[suicidesspyder]

No problem i am still testing others as well for other classes to max dps. Like i posted on my pally before. Everyones worried oh one target or aoe targets.

I for one stated i put both single and aoe in one macro why. It lessens the amount you have to worry about like oh snap i have to mash this button or that button. As stated even if its multiple targets your always hitting one first.

You have conscration down for others atm. So you nail the first one that makes sure no dps takes off you then you hit hammer. This grabs other two. While this you can tab and single target each one individually. While still aoeing.

I love this way cause it still allows one button mashing when i am running my group. Still getting used to the added heal for shamans and stuff now.

But anything else let me know i will be spending some dedicated macro time on monday for all classes i have which is all but rogues and warriors since i dont play my two that much.

[lans83]

/castsequence reset=target Hammer of the Righteous,Judgement,Hammer of the Righteous,Avenger's Shield,Hammer of the Righteous,Shield of the Righteous,Hammer of the Righteous,Judgement,Hammer of the Righteous,Holy Wrath,Hammer of the Righteous,Shield of the Righteous

Made a macro version of the theorycrafted prot rotation over at maintankadin
Use SuperDuperMacro to extend the macro length.

Don't need an addon for this one if you make just a couple changes to it. I came up with this one too, somewhat, just change the reset=target to reset=10 and just one of the Hammer of the Righteous to Crusader Strike, preferably at the end of it. By the time you hit the CS you'll be way ahead of the dps in the group to worry about the minor loss in dps. Ran with this setup my first attempt the other day and topped the dps charts in a pug in Recount. Here's my setup:

Pull with Hand of Reckoning then

Q Button:
AS macro
/cast [@mouseover] Avenger's Shield (will be reset by the time it reaches this in the following macro, big help with pulling casters in)

E Button:
Spam
/startattack
/Click ActionButton8
/Click ActionButton9
/Click ActionButton10

ActionButton8:
DPS macro
/castsequence reset=5 Hammer of the Righteous,Judgement,Hammer of the Righteous,Holy Wrath,Hammer of the Righteous,Shield of the Righteous,Hammer of the Righteous,Judgement,Hammer of the Righteous,Avenger's Shield,Crusader Strike,Shield of the Righteous

ActionButton9:
Divine Protection spell only, no macro. Shares no cooldown with dps macro.

ActionButton10:
Consecration spell, no macro. Shares global cooldown with dps macro, so it'll this when it can inbetween the castsequence rotation.

10 can be swapped out with Hammer of Wrath as it will do the same action when it's able to cast. Didn't seem to work with putting HoW after or before Consecration so it's on it's own hotkey as an [@mouseover] macro too

Also check my armory if you want for spec, stats are still messed up on there. Don't think they implemented the Mastery stat into the site yet. I've got it on all my gear now, so my avoidance is up to 81.18 with just Kings up and 80.87 with Might. I use the following script to find out:

/script DEFAULT_CHAT_FRAME:AddMessage("Need 102.4 combat table coverage. Currently at: "..string.format("%.2f", GetDodgeChance()+GetBlockChance()+GetParryChance() +5))

[leroyreborn]

anyone else been able to macro aimed shot. even in simple macro like /cast aimed shot its says you can't do that yet. thinking its bug but was woundering if anyone else has had any luck

[confusedtx5]

Am I the only one concerned at the dps loss of using a castsequence? Unfortunately some of us have 300+ pings, meaning about 1 second of dps loss between Lava Bursts.
So, I am using this:

/assist focus
/castsequence reset=target Flame Shock,null
/cast Elemental Mastery
/cast Lightning Bolt
/cast Lava Burst

And I have a 2nd button for Earth Shock, which will also do hotstreak pyros

[Toned]

I get like 60ms on my server so castsequence lag isn't really an issue for me but I'll try out your method later tonight. With the macro I posted my guys are getting about 10-11k dps on target dummies @6k-6.1k GS. I haven't tried to see what my dps is raid buffed/appropriate debuffs/ or included the OP 30% ICC buff.

[sp0000n]

Could you guys explain this one to me, please, and why the changes to click wouldn't break it? I'm so lost right now I can't even picture how this appears on the screen. click1, click2, and click3... maybe these are buttons but then buttons are referred to separatley below?

Balance druid macros

click1
/click MultiBarLeftButton1 <<<<< /castsequence wrath
/click MultiBarLeftButton2 <<<<< /castsequence starsurge
click2
/click MultiBarLeftButton3 <<<<< /castsequence starfire
/click MultiBarLeftButton4 <<<<< /castsequence starsurge
click3
/click MultiBarLeftButton5 <<<<< /castsequence insect swarm
/click MultiBarLeftButton6 <<<<< /castsequence moonfire

since i'm using 3 moonkins i'm gonna use buttons 1-5

button 1 is click1 for every druid in actionbar1 and click2 in actionbar2
button 5 is click3 for every druid in actionbar 1+2
button 2, 3 and 4 are /swapactionbar 1 2 button for each druid so i can manage eclipse

[Toned]

Blood DK Tank - With Diseases

/castsequence reset=combat icy touch, plague strike, pestilence, blood boil, death strike, icy touch, plague strike, blood boil, heart strike, plague strike, blood boil, icy touch, heart strike

/cast rune strike

This is what im currently using my DK isn't 80 yet (lvl 76) so I don't focus on death strike as much as it causes rune locks.

[Enoah35]

Frost Mage :

/castsequence reset=combat Frostbolt, Frostbolt, Frostbolt, Ice lance, Frostbolt, Frostbolt, Frostbolt, Frostfire bolt, Ice lance, Frostbolt, Frostbolt, Ice lance
/cast Deep Freeze

The frostfire bolt is in the macro so that I don't have to use 2 buttons to manuver the proc. I should now that Jamba recognize the brain freeze proc, but I found this working out fine. Ice lance is on the macro aswell to not waste the finger of frost procs. Sure there are some times firing ice lance without it and will have some loss of dps... which needs some working. Maybe I separate ice lance, frostfire bolt on separate macro. On heroic it may not be necesary, mobs are dying so fast now...

There are probably better cast sequence but after many testing I found this working all right. Doing from 3k-4.1k depending greatly on what dungeons I am. I would like to try fire but the hot streak proc is bit hard to manuver. Yes I have seen to put a different macro button just for pyro. Its that the heroics, mobs die so quick which fire is a bit weak on burst compared to frost and arcane. I may give arcane a shot, but so far I am enjoying frost dps. Love when mob dies unable to do anything with my 2 frost mages using deep freeze simultaneously.

[boxblizzard]

anymore news on enhancement shaman, death knight, frost/unholy?

im working on these at the moment but not up to my beta release standard..

[Khatovar]

I manage a lot of stuff manually.

ENH

ST DPS

/assist focus
/castsequence [@focustarget]  reset=combat Stormstrike, Flame Shock, Lava Lash, Stormstrike, Earth Shock, Lava Lash, Earth Shock
/startattack
/petattack

AoE DPS

/assist focus
/castsequence [@focustarget]  reset=combat Stormstrike, Flame Shock, Lava Lash, Magma Totem, Stormstrike, Earth Shock, Lava Lash, Earth Shock
/startattack
/petattack
/cast Fire Nova

UH DK

ST DPS

/assist focus
/castsequence reset=target/3 Icy Touch, Plague Strike, Festering Strike, Pestilence, Scourge Strike, null
/castsequence Scourge Strike, Festering Strike
/cast Dark Transformation
/petattack

AoE DPS

/assist focus
/castsequence reset=target/3 Plague Strike, Icy Touch, Blood Boil, Pestilence, Scourge Strike, null
/castsequence Blood Boil, Icy Touch, Scourge Strike
/cast Dark Transformation
/petattack