Close
Page 7 of 11 FirstFirst ... 5 6 7 8 9 ... LastLast
Showing results 61 to 70 of 109
  1. #61

    Default

    ok let me test that now, Ill see what I come up with.

  2. #62

    Default

    ok <SetFocusDelay 0 15> gives me the 90 degree twist in the video I showed you for the assist

    Same thing with <SetFocusDelay 0 10>

    Tried increasing.

    At <SetFocusDelay 0 25> The twist stops, but the assist breaks.

    Lowered again

    At <SetFocusDelay 0 20> The twist returns.

    Going to start going between the two.

    <SetFocusDelay 0 21> still turning.
    <SetFocusDelay 0 22> still turning.
    <SetFocusDelay 0 23> still turning.
    <SetFocusDelay 0 24> stops turning... but breaks stick.

    I only added the delay to my assist key, let me paste how I used it.

    <hotkey Tab>
    <sendpc local>
    <SetFocusDelay 0 24>
    <SendWinBackgroundDAOC Secondclient>
    <2>
    <sendpc 192.168.0.103>
    <sendwin Box>
    <2>


    --------------------
    Going to keep reducing below 10 and see what happens

    9 worked first click, all follow up clicks turned.
    8 turned
    7 turned only main client, and only slightly
    6 first stroke only turned main client, following turned both
    5 worked...WOOT!

    Seems at 5 its fully functional going to play around with it a bit to make sure.

    Ok, 5 breaks under multipresses, lowered it down to 1. As it approached 1 it had to be spammed more and more, at 1 its more or less gone.

  3. #63

    Default

    You're getting twisting while pressing W without pressing the right-mouse bubton? Or did you go back to the macro that caused problems with right-click?

    Let's put the right-click problem aside for the moment because it involves the mouse and therefore introduces more variables. It's easier to debug things if we stick to the simplest possible case. So let's test while running on /stick and pressing W's.

    The macro's good but the only way to stop the leakage is to go down from 15 because 15 is the default you started with. In other words try:

    <SetFocusDelay 0 14>
    <SetFocusDelay 0 13>
    all the way to
    <SetFocusDelay 0 0>
    �Author of HotkeyNet and Mojo

  4. #64

    Default

    meh totally forgot about the right mouse button! ughh, let me retest.

  5. #65

    Default

    ok at 5 no break stick, works fine even when spammed

  6. #66

    Default

    I'm trying to understand where the twisting is coming from. That's a totally incomprehensible bug to me. What keys or mouse buttons are you pressing when the twisting happens? I'm not talking about the macro output, i'm asking what you're doing manually with your fingers.
    �Author of HotkeyNet and Mojo

  7. #67

    Default

    the twisting I believe is due to mouse look. I ONLY get the twist when running TWO clients with right mouse as mouse look. I turn it to where only ONE client has mouse look on and no more twist.

    I just forgot to do that again... so my fault.

    As for what I do when that happens. Pressing W to move forward. Spaming tab to assist. Holding right mouse to turn. If I disable mouselook on the second client on same pc, problem goes away.

  8. #68

    Default

    Doh. This whole conversation, I had Mouse Look and Mouse Pan confused. That's why I couldn't understand how it could break stick. I just logged into the game and tried them both. Okay, now I understand.

    Thanks for testing. So what's the bottom line? 5 works the best? Is it good enough or not quite?
    �Author of HotkeyNet and Mojo

  9. #69

    Default

    out of maybe 500 spams it broke stick one time... thats fine for me

  10. #70

    Default

    What happens at 4 and 6? I'm trying to get a sense of how sensitive it is.
    �Author of HotkeyNet and Mojo

Similar Threads

  1. Replies: 3
    Last Post: 01-31-2009, 07:20 PM
  2. Suche für Daoc das dual-boxing script!
    By Peek in forum German
    Replies: 5
    Last Post: 11-29-2008, 12:58 PM
  3. Replies: 0
    Last Post: 05-15-2008, 02:46 PM
  4. dual-boxing DAoC
    By Sejal in forum General WoW Discussion
    Replies: 1
    Last Post: 03-29-2008, 04:30 PM
  5. DAoC+nostromo= need help dual logging
    By shiftz in forum New Multi-Boxers & Support
    Replies: 3
    Last Post: 11-15-2007, 02:33 AM

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •