ok <SetFocusDelay 0 15> gives me the 90 degree twist in the video I showed you for the assist

Same thing with <SetFocusDelay 0 10>

Tried increasing.

At <SetFocusDelay 0 25> The twist stops, but the assist breaks.

Lowered again

At <SetFocusDelay 0 20> The twist returns.

Going to start going between the two.

<SetFocusDelay 0 21> still turning.
<SetFocusDelay 0 22> still turning.
<SetFocusDelay 0 23> still turning.
<SetFocusDelay 0 24> stops turning... but breaks stick.

I only added the delay to my assist key, let me paste how I used it.

<hotkey Tab>
<sendpc local>
<SetFocusDelay 0 24>
<SendWinBackgroundDAOC Secondclient>
<2>
<sendpc 192.168.0.103>
<sendwin Box>
<2>


--------------------
Going to keep reducing below 10 and see what happens

9 worked first click, all follow up clicks turned.
8 turned
7 turned only main client, and only slightly
6 first stroke only turned main client, following turned both
5 worked...WOOT!

Seems at 5 its fully functional going to play around with it a bit to make sure.

Ok, 5 breaks under multipresses, lowered it down to 1. As it approached 1 it had to be spammed more and more, at 1 its more or less gone.