Close
Page 1 of 2 1 2 LastLast
Showing results 1 to 10 of 15
  1. #1

    Default Elemental Shaman - Destruction Warlock - Arcane Mage Macros

    Here are the macros I am using on my Elemental Shaman, Destruction Warlock, & Arcane Mage. Some of them use a click based cast. In order for you to get the commas right on a click based macro you need to have a rough idea how many times you spam the dps key for it to be effective. I spam anywhere from 4-5 clicks per second. If you want to do a test just open notepad and spam a key at the same pace for 10 seconds. Take how many clicks you made and divide it by 10 to see your clicks per second. Once you get your macros made you will need to tweak the commas at the target dummy. So if a skill cool down was 10 seconds and you spammed 4 clicks per second you would need 40 commas in that macro so it goes off close to the expiration of the cool down. You have to make adjustments for set bonus to the times. The flameshock on the shaman set will require you to adjust your commas on your flameshock macro.


    Here are the macros and where they are on my screen.


    Elemental Shaman

    Main Click DPS Button - This macro clicks your right action bar #1 which is on the right side of your screen. You need to put your click macros in the following order starting at the 8th button down from the top. You can move it around but this is the position I have mine set.

    /run SetCVar("Sound_EnableSFX","0")
    /click MultiBarRightButton8
    /click MultiBarRightButton9
    /click MultiBarRightButton10
    /click MultiBarRightButton11
    /click MultiBarRightButton12
    /run SetCVar("Sound_EnableSFX","1")
    This is optional if you are having mana problems. Once you get some gear you will not need thunderstorm in your macro. Taking it out will increase DPS. Thunderstorm Macro for Position 8 on Right Action Bar - Adjust comma clicks for your click per second rate so the full cool down is consumed by commas.

    /castsequence Thunderstorm,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,
    Flameshock Macro for Position 9 on Right Action Bar - Adjust comma clicks to match your flameshock cool down so it goes off again as close to when the dot is going to expire on your target.

    #showtooltip flame shock
    /use 13
    /use 14
    /castsequence reset=target/combat/4 Flame Shock,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,
    Lava Burst Macro for Position 10 on Right Action Bar - Adjust comma clicks to match the lava burst cool down so it goes off again immediately when it's off cool down.

    /castsequence reset=combat/ctrl Lava Burst,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    Chain Lightning Macro for Position 11 on Right Action Bar - Adjust the same as you did for lava burst so chain lighting goes off when the cool down is over.

    /castsequence reset=combat/ctrl Chain lightning,,,,,,,,,,,,,,
    Lighting Bolt Macro for Position 12 on Right Action Bar - This is the filler spell to go off when all others are on cool down

    /cast Elemental Mastery
    /cast lightning bolt

    Arcane Mage Macro - I would download super duper macro for this or macaroon. I like super duper because it's very easy to use. It can be downloaded at wowinterface.

    You only need 1 macro for an Arcane Mage. This macro is very simple and requires you to always have mana gems so you do not go oom so fast.

    #showtooltip
    /run SetCVar("Sound_EnableSFX","0")
    /stopmacro [channeling]
    /use 13
    /use 14
    /cast icy veins
    /cast arcane power
    /cast presence of mind
    /castsequence reset=combat/4 arcane blast, arcane blast, arcane blast, arcane blast, arcane missiles
    /use mana sapphire
    /cast mirror image
    /run SetCVar("Sound_EnableSFX","1")

    Destruction Lock - I am new to this but I have my macro setup to work very effecient right now. This one may take some long testing at the target dummy to make sure you have everything set right for the comma delays.

    Main Click Macro - This is exactly link the Shaman Click that uses the Right Action Bar starting at button 7 if you count down from the top.

    /run SetCVar("Sound_EnableSFX","0")
    /click MultiBarRightButton7
    /click MultiBarRightButton8
    /click MultiBarRightButton9
    /click MultiBarRightButton10
    /click MultiBarRightButton11
    /click MultiBarRightButton12
    /run SetCVar("Sound_EnableSFX","1")
    Curse of Elements + Trinkets for Position 7 on Right Action Bar - This cast curse of elements 1 time and blows your trinkets. I don't know if the nochanneling is needed I copied that from someone here.

    #showtooltip
    /stopmacro [noharm]
    /castsequence [nochanneling] reset=target Curse of the Elements, Null
    /use [nochanneling] 13
    /use [nochanneling] 14
    Lifetap for Position 8 on Right Action Bar - This is your lifetap macro that needs to be adjusted so you are not spamming it too much. You want to keep the spell bonus up from the glyph and not run out of mana. The commas I have in mine are from testing on the target dummy. Adjust according to your needs. It resets on combat and target. You can just use combat if you want.

    #showtooltip
    /castsequence reset=combat/target Life Tap,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    Immolate for Position 9 on Right Action Bar - This cast immolate and used with the conflagrate glyph has commas delays to consume the full duration of the dot. You want this to cast again when it's getting close to the dot expiring on your target.

    #showtooltip
    /castsequence [nochanneling] reset=target Immolate,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,
    Conflagrate for Position 10 on Right Action Bar - This is your conflagrate macro which should have comma delays based on your click per second so it goes off immediately when it's cool down expires.

    #showtooltip
    /castsequence [nochanneling] reset=combat Conflagrate,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,
    Chaos Bolt for Position 11 on Right Action Bar - This is similar to conflagrate. You want it to go off when the cool down expires. Adjust your commas to match your click per second speed.

    #showtooltip
    /castsequence [nochanneling] reset=combat Chaos Bolt,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,
    Incenerate for Position 12 on Right Action Bar - This is your filler spell similar to lightning bolt for elemental shamas. I have it on a cast sequence but you can just use /cast if you want. I have not tested it that way and don't know why I have it as a sequence. Most likely it was from me playing around with it. If you just want to use it as I have it listed below it will work fine.

    #showtooltip
    /castsequence reset=combat Incinerate

    Well that's it. This should keep your busy at the target dummy for awhile. Make sure you have a good idea of your click spam rate. I am about 4-5 clicks per second so I adjust my commas based on that. I always start out using 4 commas per click then add more to get it as close as I can to cool down times. Many thanks to all who posted stuff in the past because I would still be using /castsequence if not for their help. When you get your comma delays down you should see some real dps increases using the click macros.

    Don't forget to glyph to optimize your dps.
    Last edited by pinotnoir : 06-03-2010 at 11:40 PM
    “Is God willing to prevent evil, but not able? Then he is not omnipotent.
    Is he able, but not willing? Then he is malevolent.
    Is he both able and willing? Then whence cometh evil?
    Is he neither able nor willing? Then why call him God?”
    Epicurus

  2. #2

    Default

    Nice stuff, though I have a couple of questions.
    Isn't the arcane mage rotation based on a self buff and proc, not something on the target, so instead of having a target reset, having it reset after a certain amount of time spent not hitting it? (i.e buff falling off from not casting)

    And, are you using the right glyphs for your destruction warlock, last I checked, life tap glyph was not quite among the top 3 glyphs for destruction (though you'll want to life tap that often anyway, i do).
    http://elitistjerks.com/f80/t38033-m...ction_warlock/
    I'm going to live forever, or die trying.
    5 Shaman Northrend Heroics - My YouTube Channel - Details about my setup (outdated)
    T2 Heroics: lvl 80 Heroics wearing lvl 60 armour
    Running 5-6 accounts on one computer, currently playing Horde on US-Skywall.
    My main teams:
    5x Shamans lvl 85
    5-class team lvl 100: Paladin, Druid, Shaman, Mage, Priest

  3. #3

    Default

    The arcane mage uses arcane blast 4 times and then missles. You are trying to get the missle proc so your missles are faster. After 4 arcane blast the % chance you have the proc up is very high.

    I could used glyph of Immolate but I chose Life Tap. It gives a good spell power boost and I should have lots of spirit once I upgrade all my gear.
    “Is God willing to prevent evil, but not able? Then he is not omnipotent.
    Is he able, but not willing? Then he is malevolent.
    Is he both able and willing? Then whence cometh evil?
    Is he neither able nor willing? Then why call him God?”
    Epicurus

  4. #4

    Default

    Quote Originally Posted by pinotnoir View Post
    The arcane mage uses arcane blast 4 times and then missles. You are trying to get the missle proc so your missles are faster. After 4 arcane blast the % chance you have the proc up is very high.

    I could used glyph of Immolate but I chose Life Tap. It gives a good spell power boost and I should have lots of spirit once I upgrade all my gear.
    He's talking about your reset qualifier. And he's right - you shouldn't be reseting on target/combat

    You should reset something like combat/3 or 4 seconds.

    If I had to guess, this reset qualifier of yours would be the reason that your mages are always out of mana, as really mana should not be a problem with them at all.

    You're resetting on target, so basically on trash your mages will NEVER cast their missiles. Don't get me wrong, casting 4Xstacked arcane blast all day is fine dps, but it's worse dps than using your missiles, and it's also the most mana-inefficient dps in the game.

    Imagine on trash with 50-60k hps, you never EVER get to your missiles before you change your target, so you just keep casting your blast blast blast blast.

    Change your reset qualifiers.


    edit: simple clarification....

    /castsequence reset=target/combat arcane blast, arcane blast, arcane blast, arcane blast, arcane missiles
    No no no no no

    /castsequence reset=combat/3 arcane blast, arcane blast, arcane blast, arcane blast, arcane missiles
    Yes yes yes yes yes

  5. #5

    Default

    Ahh thanks for pointing that out.. I didnt even know I had that set to target. No wonder I don't see missles that much. I will change it for sure.
    “Is God willing to prevent evil, but not able? Then he is not omnipotent.
    Is he able, but not willing? Then he is malevolent.
    Is he both able and willing? Then whence cometh evil?
    Is he neither able nor willing? Then why call him God?”
    Epicurus

  6. #6

    Default

    *smiles*
    I'm going to live forever, or die trying.
    5 Shaman Northrend Heroics - My YouTube Channel - Details about my setup (outdated)
    T2 Heroics: lvl 80 Heroics wearing lvl 60 armour
    Running 5-6 accounts on one computer, currently playing Horde on US-Skywall.
    My main teams:
    5x Shamans lvl 85
    5-class team lvl 100: Paladin, Druid, Shaman, Mage, Priest

  7. #7

    Default

    Thanks for sharing.

    About the shammy:

    Why use Thunderstorm in the beginning when you are at full mana ?
    (reading your sequence made me rethink the position of Elemental Mastery in my rotation. I think I will use your spot for it as well)


    About the Mage castsequence.

    1: I remember a discussion about differeneces in DPS when using castsequence and the /click method.
    Is there a /click method which would bring more dps ?
    2: Does it ever cast the MIrror image ?

    About the Lock,

    I got improved shadow bolt as well, to get the 5% crit for my team http://www.wowhead.com/spell=17803
    (very nice since I have shammy, mage, lock (might even give my priest some dps as well)
    cheers
    BC
    Last edited by Bloodcloud : 04-06-2010 at 08:18 AM
    I don't suffer from Schizophrenia, I enjoy every moment of it !

  8. #8

    Default

    Quote Originally Posted by Bloodcloud View Post
    Thanks for sharing.

    About the shammy:

    Why use Thunderstorm in the beginning when you are at full mana ?
    (reading your sequence made me rethink the position of Elemental Mastery in my rotation. I think I will use your spot for it as well)



    About the Mage castsequence.

    1: I remember a discussion about differeneces in DPS when using castsequence and the /click method.
    Is there a /click method which would bring more dps ?
    2: Does it ever cast the MIrror image ?

    No click method would matter because you want to cast exactly 4 arcane blast and 1 arcane missles. The macro I listed cast mirror image whenever the spell is ready. It cast all the dps boosting spells when they are off cooldown.


    About the Lock,

    I got improved shadow bolt as well, to get the 5% crit for my team http://www.wowhead.com/spell=17803
    (very nice since I have shammy, mage, lock (might even give my priest some dps as well)
    cheers

    BC


    Well the bottom click is the filler cast so if you put it down there the times will be messed up. Since I do not have the cast sequence set to restart it does not go off at the start of every fight. With the setup I have my shaman is pretty much full mana all the time.

    No click method would matter because you want to cast exactly 4 arcane blast and 1 arcane missles. The macro I listed cast mirror image whenever the spell is ready. It cast all the dps boosting spells when they are off cooldown.

    I don't have shadow bolt because as destruction I use incinerate. If you are deep destruction you should be using incinerate and chaos bolt.
    “Is God willing to prevent evil, but not able? Then he is not omnipotent.
    Is he able, but not willing? Then he is malevolent.
    Is he both able and willing? Then whence cometh evil?
    Is he neither able nor willing? Then why call him God?”
    Epicurus

  9. #9
    Member
    Join Date
    Sep 2008
    Location
    Calgary, AB and Vancouver, BC
    Posts
    7638
    Blog Entries
    2

    Default

    Elemental Mastery is in instant cast off of the GCD, so like trinkets will fire off on the first press of the button, no matter where you put it.

    You could put it on the click macro, any of the called macros, or the fall through and the result will be the same.

    The only things we control, are the order of spells which incur a GCD, and the amount of spam time (commas) until those spells are called again.
    EverQuest I: Bard / Enchanter / Druid / Wizard / 2x Magician.
    Diablo III: 4x Crusader & 4x Wizard.

    My Guide to IS Boxer http://www.dual-boxing.com/showthread.php?t=26231 (somewhat dated).
    Streaming in 1080p HD: www.twitch.tv/ualaa
    Twitter: @Ualaa


  10. #10

    Default

    Quote Originally Posted by pinotnoir View Post
    Well the bottom click is the filler cast so if you put it down there the times will be messed up. Since I do not have the cast sequence set to restart it does not go off at the start of every fight. With the setup I have my shaman is pretty much full mana all the time.
    I understand. I currently don't have it in my macro, but I will definitely put it in now. Thanks

    Quote Originally Posted by pinotnoir View Post
    No click method would matter because you want to cast exactly 4 arcane blast and 1 arcane missles. The macro I listed cast mirror image whenever the spell is ready. It cast all the dps boosting spells when they are off cooldown.
    Indeed. The discussion I remember was about latency of castsequence vs. fall through casting.
    a plain castsequence workes perfect since some time on my DK tank and I am happy with it there

    Quote Originally Posted by pinotnoir View Post
    I don't have shadow bolt because as destruction I use incinerate. If you are deep destruction you should be using incinerate and chaos bolt.
    I am deep destro as well, but I use improved Shadow bolt to apply the debuff and to boost the dps of the others.
    (reset=target and spaces for 30 sec. So in a boss fight I loose some dps once every 30 sec. Currently I am also speced for improved soul leech for mana regeneration of all casters, might change that as well)

    cheers
    I don't suffer from Schizophrenia, I enjoy every moment of it !

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •