Build 19: Active window tracking

[Moorea]

I'm not sure what you mean by check both sides. Mojo doesn't check anything having to do with IP addresses. Here's how Mojo actually works.

Each Mojo sends out UDP packets to the whole network saying, "I'm a Mojo, call me if you're interested." Meanwhile other Mojos are listening for these packets on all their adapters. There is no special IP address used.

Where the specified IP address comes in (the one you had to change) is that when a Mojo sends out the message, "Call me if you're interested," it has to provide an IP address at which it will be called. In other words, it actually says, "If your'e interested, call me at the following IP address: XX.XX.XX.XX." By default, Mojo lets the OS choose this IP address. That didn't work, so you intevened and chose an address manually. That didn't work either.

it did work (after changing the IP in the drop down) for the simple case of 1 mojo using ics connected to the mojo providing ics; what didn't work after that (2 different tests; 2 different posts) is having both the "inside" and "outside" mojos

so to solve the first case; can you send in that msg all the IPs instead of just one ?

What's happening here is (apparently) some peculiarity in the way ICS works. It's possible that it doesn't propagate UDP broadcasts. I don't know anything about ICS. I'll look into it.

it's windows' built in 0 config NAT and it's kind of handy; I expect several people to use it - but maybe not in the weird setup that I have where I try to save 1 wireless latency yet still use extra computers on both side of that nat