One issue, one question

[Lax]

Are you hitting Shift+Alt+R at any point?

Part of your configuration might be confusing you. Shift+Alt+R is going to toggle both Key and Mouse repeat from the current window (not applying this change to All Windows). Then your Repeater profile has Key Repeat on by default, and toggles for Key Repeat and Mouse Repeat on All Windows. So if you start out by hitting Shift+Alt+R you're disabling Key Repeat and enabling Mouse Repeat on your current window, then hitting Mouse4 will toggle Mouse Repeat on all windows, making it off from your current window but on from other windows. So switching windows could give the appearance of "hey it magically turned Repeater on, wtf!"

Beyond that, no way is it toggling Repeat when you switch windows. Hope this helps you track down how you're getting it confused either way

[Altsoba]

Are you hitting Shift+Alt+R at any point?

Part of your configuration might be confusing you. Shift+Alt+R is going to toggle both Key and Mouse repeat from the current window (not applying this change to All Windows). Then your Repeater profile has Key Repeat on by default, and toggles for Key Repeat and Mouse Repeat on All Windows. So if you start out by hitting Shift+Alt+R you're disabling Key Repeat and enabling Mouse Repeat on your current window, then hitting Mouse4 will toggle Mouse Repeat on all windows, making it off from your current window but on from other windows. So switching windows could give the appearance of "hey it magically turned Repeater on, wtf!"

Beyond that, no way is it toggling Repeat when you switch windows. Hope this helps you track down how you're getting it confused either way

I was afraid it was going to be hard that's why I hesitated asking ^^.
I don't see where this binding is...

Upper Window:
Repeater Profiles - Default

Bottom window:
Hotkeys:
Current window - All blank

All windows - All are blank except Toggle keyboard repeating - PAUSE and Toggle Mouse repeating - Mouse 4

What I want to achieve is:
It ALWAYS broadcasts keys except if I press PAUSE and so it only works on Main
It NEVER broadcasts mouse except if I press Mouse4 and in that case it broadcasts to all windows

Should I change something?
Where is that SH-ALT-R? I think it's better to deactivate it since I always have issues with keys not at the same place like the qwerty (using azerty

Thank you

[Reglar]

I have a suggestion for you.

I had a similar issue to you, when I switched windows either via keyboard or mouse the key repeat turned on (but not mouse).

I redid the layout wizard and noticed Lax doesn't have the wizard set to use a key to switch windows.

So I set my slots to not have a key to switch, fired it back up and lo and behold when I switch windows (just by mouse), no repeat.

For kicks I then took it all down, loaded up a default config from the wizard, added a key invocation to the windows, and switching does NOT enable repeat, so there was some interaction in my setup.

And then I loaded back my own config, added back in the switch keys, and now it doesn't repeat. So, I don't know what the issue was, I can't reproduce it, but try unsetting and reseting your window switch keys, or if all else fails - try exactly what I did above (about clearing and making a new default config, loading it into innerspace, then switching back to yours and adding the window select keys).

If someone wants to review my profile here you go.

No window select keys
http://pastebin.com/m1f6a6520

With window select keys
http://pastebin.com/d50b394e2

[Altsoba]

Thank you reglar
I really want an assessment from Lax on what am I doing wrong and how to fix it. I need to understand it ^^

But if really desperate, I'll do what you suggest.

This is so annoying and keeps me from doing main rotation in arena...

[suicidesspyder]

Only problem i have is in pvp. When one toon dies and i switch to him its like he wants to continue following the dead toon. So i have to switch screens a cpl times to clear it. If i am in battle then i just stay in one spot and try and kill things.

[Iceorbz]

Woops i hit reply instead of new thread.

[Reglar]

I have a suggestion for you.

I had a similar issue to you, when I switched windows either via keyboard or mouse the key repeat turned on (but not mouse).

I redid the layout wizard and noticed Lax doesn't have the wizard set to use a key to switch windows.

So I set my slots to not have a key to switch, fired it back up and lo and behold when I switch windows (just by mouse), no repeat.

For kicks I then took it all down, loaded up a default config from the wizard, added a key invocation to the windows, and switching does NOT enable repeat, so there was some interaction in my setup.

And then I loaded back my own config, added back in the switch keys, and now it doesn't repeat. So, I don't know what the issue was, I can't reproduce it, but try unsetting and reseting your window switch keys, or if all else fails - try exactly what I did above (about clearing and making a new default config, loading it into innerspace, then switching back to yours and adding the window select keys).

If someone wants to review my profile here you go.

No window select keys
http://pastebin.com/m1f6a6520

With window select keys
http://pastebin.com/d50b394e2

Bah, my problem came back, even with the removal of window binds to switch. I'm just going to start fresh, with the wizard, and see how that goes.

[Altsoba]

That's why Reglar, I need a solution I can control .
Hope someone will help us.

[Altsoba]

Redid wizard, things are much better, panick is passing. Most issues come from the fact that I have azerty and not qwerty what messes up a lot with default bindings, so I'm just looking a bit everywhere where problems can "spawn".

[Lax]

I was afraid it was going to be hard that's why I hesitated asking ^^.
I don't see where this binding is...

Upper Window:
Repeater Profiles - Default

Bottom window:
Hotkeys:
Current window - All blank

All windows - All are blank except Toggle keyboard repeating - PAUSE and Toggle Mouse repeating - Mouse 4

What I want to achieve is:
It ALWAYS broadcasts keys except if I press PAUSE and so it only works on Main
It NEVER broadcasts mouse except if I press Mouse4 and in that case it broadcasts to all windows

Should I change something?
Where is that SH-ALT-R? I think it's better to deactivate it since I always have issues with keys not at the same place like the qwerty (using azerty

Thank you

The Shift+Alt+R hotkey is set up in the Control key map if you used the Quick Setup Wizard. If you're not looking through any of the key maps when you're looking for hotkeys in use, then you're missing a lot :P