Close
Showing results 1 to 10 of 12

Hybrid View

  1. #1

    Default

    Can turn the normal cast bar back on under player options in Xperl to see if your steadies are actually happening.

    The number of shots fired should be fairly close to 1 auto to 1 of everything else be it steady/arcane/sting. Check the count of shot and if your arcane/steady/stings totalled is lower than your auto then you missing some shots.

    Make sure to use Aspect of the dragonhawk not AoH also.

    Will go attack a dummy later on my hunter and test the macro and see what impact it has on my dps.

    Ok

    Manual Weave

    3200 dps 41% auto 39% steady 11% arcane 8% viper 35% pet

    Your click macro.

    2700 dps 50% auto 22% steady 17% arcane 11% SS 41%pet

    Your macro without the commas after steady shot.

    3000 dps 38 auto 34 Steady 18 Arcane 9 SS 9 pet 38 pet.

    Suggest you take out the comma's after the steady shot as its delaying the firing of steady shot or change it to simply /cast Steady Shot.

    Anyways hope it helps.

  2. #2

    Default

    Quote Originally Posted by Zamok View Post

    Suggest you take out the comma's after the steady shot as its delaying the firing of steady shot or change it to simply /cast Steady Shot.

    Anyways hope it helps.
    Thanks all for the suggestions. I got rid of the commas after the steady shot as a few had suggested, and it appears the dps went up a bit, (I also had a minor gear upgrade, but not enough to make the whole difference.

    With the change, the dps was around 2800.

    Interesting though.. I did some more testing with my old MM macro, which is castsequence, but appears to still be working.

    #showtooltip Chimera Shot
    /console Sound_EnableSFX 0
    /castsequence reset=10/combat Chimera Shot, Aimed Shot, Steady Shot, Steady Shot, Steady Shot, Steady Shot
    /script UIErrorsFrame:Clear()
    /console Sound_EnableSFX 1

    It appears that everything is firing, and dps with this and the same gear setup is ~3600. Some lucky procs and RF/Readiness push it towards 3800 or more.

    I'm not testing with kill shot in either, and both were with a wolf.

    Guess the last thing I can do with the BM spec is figure out how to work in kill command, and see how much of a boost that is, but it certainly isn't going to make up the ~800 dps difference I am seeing.

    Any other ideas on boosting BM through the macro?

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •