Geforce 295

[Eggy]

Hey guys, thisquite frankly is pissing me off, been messing with it all day....
For whatever reason I cannot get wow to utilize both GPUs in my 295, it's sitting at around 50-60% load at all times, even though it's struggling for FPS. My CPU load is fine across all cores(Average about 60% load), RAM useage is about 75%, my HD load is about 1mb/s so it cant be that either. I've tried installing windows7, but quite frankly it's just way worse then it is in Vista, I had to lower the settings on my instances from running ultra on main and medium on the slaves to lowest on the slaves and 'high' on the main to even get playable FPS. But for now it's what I'm working with since I heard good things(Though I havn't seen anything good about it yet :P).

So if anyone got a heads on how to spread the load across both GPUs I sure would appriciate it.

[Ualaa]

A lot of the X2 cards, with two physical cards on one board have this issue.

[alcattle]

I suggest you give InnerSpace a try. They handle 2 graphics cards or 2x cards differently then WoW does.

[Eggy]

Yeah I have been Al, but even following Lax's instructions(seemed to be working, it started the games as it should with second gpu ect.) the load is still sitting at 50-60% on the gfx card.
Been switching between win7 and win vista and vista is still running best, but like I said, cant use more then 60% load on the GPU, which means only one GPU used for WoW.

[Babysir]

Yeah I have been Al, but even following Lax's instructions(seemed to be working, it started the games as it should with second gpu ect.) the load is still sitting at 50-60% on the gfx card.
Been switching between win7 and win vista and vista is still running best, but like I said, cant use more then 60% load on the GPU, which means only one GPU used for WoW.

Where can I find these instructions? I'm currently trying out ISboxer and I have an SLI system. It'd be great if I could have the slaves rendered on the second GPU while the main is rendered on the first.

[Drommon]

Where can I find these instructions? I'm currently trying out ISboxer and I have an SLI system. It'd be great if I could have the slaves rendered on the second GPU while the main is rendered on the first.

Likewise. I am looking for these instructions as well.

Drommon

[Babysir]

Likewise. I am looking for these instructions as well.

Drommon

I was able to get the instructions from Lax. basically in the IS configuration you need to create a profile for each GPU, then in ISBoxer select which character/client will use what GPU.

For example, I made two profiles and set it up so that my main would use profile 1 (GPU1) and all 4 of my slaves would use profile 2 (GPU2)

[Drommon]

I was able to get the instructions from Lax. basically in the IS configuration you need to create a profile for each GPU, then in ISBoxer select which character/client will use what GPU.

For example, I made two profiles and set it up so that my main would use profile 1 (GPU1) and all 4 of my slaves would use profile 2 (GPU2)

SWEET! I am sold now! I am going to try out innerspace just for this ability. Thanks for the info!

Drommon

[Bovidae]

If you are using more than 50% of your GPU potential, I would believe you are using both GPUs.

Unless one GPU is pushing 120% capacity.

I would look for other bottlenecks. What are the rest of your system specs?

[Eggy]

It's an I7 920, OCed to 3.6ghz, 6gb RAM and I run two 60gb OCZ Vertex(SSD) in RAID0 where I got my system and my wow folder on. I am pretty confident it's the GFX that's the bottleneck here, since I can easily stress it to get about 90% load on the GPU on a normal benchmark.