back to MB after break, need some advice

[boxblizzard]

hello, had a break from my boxing 5 shaman/priest's now im back.

as i got a second computer now from cod4 lan gaming events im thinking of using it for a second rig for handling 2-3 copies of wow instead of running all on my main machine.

now the question is i got keyclone but i have never did more than 1 hardware setup. can i just tuse 2 computers and 2 copies of keyclone to make this work? KC will send the instructions to my other computer?

or do i need the keyboards and switches etc

[boxblizzard]

bump bump bump bump!

[Coltimar]

You will need 2 copies of Keyclone. To be clear, you have to buy 2 licenses. Setup your PC 1 with the toons you want to load, then setup PC 2 with the toons you want to load there. Then get the IP address of your second machine (Start->Run->Cmd then type ipconfig). In the command line on PC 1 put in all of your toons and that IP address.

For example:

192.168.0.5;Michael;Jackie;Teeto;Jermayne;Marlan

Then when you connect it will connect to the Keyclone on PC 2. You have to manually start the other Keyclone on PC 2 I believe for those characters to load. This is how I do it. I have been 10 boxing for several months and I haven't researched a better way to do it because this works for me.

[boxblizzard]

You will need 2 copies of Keyclone. To be clear, you have to buy 2 licenses. Setup your PC 1 with the toons you want to load, then setup PC 2 with the toons you want to load there. Then get the IP address of your second machine (Start->Run->Cmd then type ipconfig). In the command line on PC 1 put in all of your toons and that IP address.

For example:

192.168.0.5;Michael;Jackie;Teeto;Jermayne;Marlan

Then when you connect it will connect to the Keyclone on PC 2. You have to manually start the other Keyclone on PC 2 I believe for those characters to load. This is how I do it. I have been 10 boxing for several months and I haven't researched a better way to do it because this works for me.

ok so just need an additional license and im sorted.

[boxblizzard]

You will need 2 copies of Keyclone. To be clear, you have to buy 2 licenses. Setup your PC 1 with the toons you want to load, then setup PC 2 with the toons you want to load there. Then get the IP address of your second machine (Start->Run->Cmd then type ipconfig). In the command line on PC 1 put in all of your toons and that IP address.

For example:

192.168.0.5;Michael;Jackie;Teeto;Jermayne;Marlan

Then when you connect it will connect to the Keyclone on PC 2. You have to manually start the other Keyclone on PC 2 I believe for those characters to load. This is how I do it. I have been 10 boxing for several months and I haven't researched a better way to do it because this works for me.

ok not working for me at all, im not sure whats wrong, got a feeling its the networking since i cant ping the second machine :/ its abit random. i will have to use a different router and configure some settings.

could i go through every setting with you to make sure everything is alright? i pm you my msn