Close
Showing results 1 to 10 of 11

Hybrid View

  1. #1
    Member Ughmahedhurtz's Avatar
    Join Date
    Jul 2007
    Location
    North of The Wall, South of The Line
    Posts
    7169

    Default

    Quote Originally Posted by Moorea View Post
    I use 255 and it works fine - if you don't set anything it will be the first 2 cores (because the value in the config.wtf is 3) which is maybe what you remember

    setting 255 assigns affinity to all 8 cores
    If you're saying it's OK because you look in task manager and see a checkbox next to all 4 cores and thinking that means it's actually using all 4 cores, I suspect you'd be mistaken.
    Now playing: WoW (Garona)

  2. #2
    Member Ughmahedhurtz's Avatar
    Join Date
    Jul 2007
    Location
    North of The Wall, South of The Line
    Posts
    7169

    Default

    Well slap my ass and call me sally...I was wrong. Looks like they finally fixed it. 255 or 15 both seem to utilize 4 cores (albeit cores 1, 2 and 4 seem to be used and not much of 3 for some reason), though setting it to 255 causes wow to reset it to 0 when you exit the game the next run. Strange. Either way, this is good!

    [edit] For normal Core2Quad Q-series CPUs and AMDs, any setting should work. For i7/nehalem CPUs, 255 affinityMask is bad. You do NOT want WoW using your HT cores--only your physical cores. See this thread for further info on how to set that. See original thread for Blue confirmation that using HT cores = bad.
    Last edited by Ughmahedhurtz : 08-29-2009 at 12:23 AM
    Now playing: WoW (Garona)

  3. #3
    Member Ughmahedhurtz's Avatar
    Join Date
    Jul 2007
    Location
    North of The Wall, South of The Line
    Posts
    7169

    Default

    Here's a blue post stating that WoW really doesn't do much with more than 2 cores, which I think I misunderstood to say that it was related to affinity. :P My bad! /drunk

    [edit] Nope, not THAT /drunk. Original blue that prompted this post (also linked in the OP):

    http://forums.worldofwarcraft.com/th...geNo=1&sid=1#4

    You can use this to let WoW run on a specific core(s) but it only works up to two cores. If you set it on 15, you just let the game use 2 out of your 4 processors but you didn't tell it which ones.
    Q u o t e:


    So if I am understanding correctly, WoW still only uses two cores, while Windows will, instead of using the same two 'default' cores, be split into other, unused, cores?

    Core 1-----Core 2------Core 3------Core 4
    WoW--------WoW---------Windows etc.

    I dont know much about this whole thing but bottom line, when will WoW itself use four-cores?
    World of Warcraft is capped to two cores because we set the default processaffinitymask to 2. There's actually quite a few threads that the game runs but mainly 2 or 3 decent-sized ones and a dozen little ones. Windows can distribute all of these among other cores if you tell it to but you can't specifically tell what thread will go where.
    Note the part in bold/underline in that last sentence. It is a critical point. I leave the why as an exercise to the reader.
    Last edited by Ughmahedhurtz : 08-29-2009 at 12:56 AM
    Now playing: WoW (Garona)

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •