Mouse problems

[sn0wman]

I can't seem to get the mouse working for my other World of Wacraft windows. only my main window that i can click on quest npc's or sell/repair/buy from vendors.

im using one computer with 3 accounts and keyclone.



i tried to use the unbuilt button emulator aswell but without any result what am i doing wrong?

[sn0wman]

bump! only have 3-4days left of the 10day RAF wow trial if i can't get these things to work i wont start dualboxing, since clicking around for in 3-4windows for everyquest would be quite annoying. :/

here's the settings i use.

[Khatovar]

You can use Jamba and set an interact button through the default ingame keybindings if you're only looking to make your slaves copy click for vendors, quests and travel. Try the search, there's tons of posts on setting up both.

The Keyclone mouse emulation is usually used for things like targetted AOEs. It's not an always on mouse cursor for all screens as far as I recall.

[sn0wman]

You can use Jamba and set an interact button through the default ingame keybindings if you're only looking to make your slaves copy click for vendors, quests and travel. Try the search, there's tons of posts on setting up both.

The Keyclone mouse emulation is usually used for things like targetted AOEs. It's not an always on mouse cursor for all screens as far as I recall.

The first thing i did was to search around here on the forums and aswell on google, but most topics are about how to get "special" keys on logitech etc to work. my problem is that the keyclicks doesn't work at all, it only works on the windows i currently got focus on usualy the main char window.

I know what you meen about jamba, but to be able to use the quest sharing the quest windows have to be up on all chars aswell.

If i only can get the mouse clicking to work i will be able to to quest much faster, now i have to switch between the windows and manualy popup all the quest windows or merchant windows.

[keyclone]

my problem is that the keyclicks doesn't work at all

:huh:

i have no idea what you have done in your setup.

my suggestion would be to remove your keyclone folder and download/install the latest release, v1.9h. on your first run, a setup wizard will pop up and walk you through a few questions. answering those will create the general settings you would need to get keyclone set up the first time. once all your wows are running, hitting any key will go to all others (unless its on the do-not-pass, obviously)

after that, you should set up a couple of macros to do the basic assist and follow. (there is a link to such a thing under keyclone-tooltray-con/FAQ/basic-setup)

let me know if that helps,

Rob

[sn0wman]

my problem is that the keyclicks doesn't work at all

:huh:

i have no idea what you have done in your setup.

my suggestion would be to remove your keyclone folder and download/install the latest release, v1.9h. on your first run, a setup wizard will pop up and walk you through a few questions. answering those will create the general settings you would need to get keyclone set up the first time. once all your wows are running, hitting any key will go to all others (unless its on the do-not-pass, obviously)

after that, you should set up a couple of macros to do the basic assist and follow. (there is a link to such a thing under keyclone-tooltray-con/FAQ/basic-setup)

let me know if that helps,

Rob

ah my bad.

it isn't the keyclicks i ment mouseclicks (sorry).

but i will try reinstall with the latest and see if it helps.

[Khatovar]

I really don't know that I understand what you're trying to do. It sounds like you are trying to use the Keyclone mouse passing to make your slaves interact with the same NPCs that your main is using. I really don't think that is the most dependable or feasable way to do that. As I said, Keyclone's mouse passing is not the same as adding a permanent cursor/mouse to every instance of WoW. Basically, all it does is go from window to window if I recall and loses its' accuracy if the windows are not al the same size/resolution.

If you did want mouse passing to work you would need :

Image 1 - "pass mouse click hotkey" You don't have a hot key here, it won't work without one. "Distinguish Left/Right Mouse click" from the info in image 2, it looks like you do want it to know the difference, so you would need to check that. "One click then off" probably needs to be unchecked for what you're trying. Beyond that, I don't know what to tell ya, I never got mousepassing to work accurately enough to make it something I was comfortable with using.

Again, your best bet for interacting on your slaves is :

1. Go into the default WoW keybindings. Set a key for "interact with target". I have the same key on all my toons so they all interact and open the window for Jamba to do its' thing.
2. Go into the default WoW interface under Mouse. Turn "click to move" on for all slaves.
3. Create a macro for "assist MAINTOOON" and bind it to a key that's easy to combine with the interact key from 1.

For me, I use ` and Alt-`. Run up to your target, hit ` and all slaves assist the main to get the NPC or mob targetted. Hit Alt-` and the main and slaves all open the window, try to loot the corpse, skin or whatever other interaction.