Close
Page 1 of 2 1 2 LastLast
Showing results 1 to 10 of 19
  1. #1

    Default v1.9g now available (hot fix)

    the new version is up. thanks to everyone for helping pinpoint any issues in the latest release.


    :!: NOTE: this version requires a license transfer, which you can do via the 'transfer' button just below the 'expired' message


    v1.9g
    --
    o bug: ghost cursors not always appearing; lag upon first showing up
    o bug: override not working properly
    o bug: focus-follows-mouse even if the check box is off
    o bug: always-on-top on working

    v1.9f
    --
    o bug: keyclone would crash when the last remote keyclone would exit
    o bug: crash on command start without region specified

    v1.9e
    --
    o bug: allow pip swap keys to pass normally
    o add: bring-to-front hotkey for clones
    o bug: Xbutton2 not triggering in mousemap
    o add: keymaps are now cached for region-keymap performance
    o add: keymaps will auto-reload after setup if any keymaps edited
    o add: region-based keymaps
    o bug: 'get license' not popping up a browswer; no default html browser found; launch IE if no default found (use firefix... it's better)
    o bug: did not set name when manually maximizing a window
    o add: 'receive only'; set in command for each wow instance
    o add: insure wow is not starting in full screen mode when modifying the config.wtf file
    o bug: hang on exit if X used on main interface (finally) fixed
    o bug: right-click/maximize... options missing; fixed
    o bug: could not launch commands after transfer complete
    o add: user driven license transfers (no more waiting around!)
    o bug: crash on message-of-the-day close after timer expires
    o add: reset roundrobin after rr-override turned off
    o add: check box to make mouse-click-passing a single click event; auto toggles off after click
    o bug: fix urls associated with tool tray menu
    o add: wow /focus based macro setup url to FAQ tooltray menu
    o add: warning on invalid command
    o add: improved pip swap and focus-follows-mouse speed
    o bug: settings sometimes not saving on exit from setup; forced flush to disk
    o bug: unable to select maximizer region due to layering fixed
    o add: added keymap override to overlay reminder window
    o add: make region names case insensitive
    o add: make commands case insensitive
    o add: override hotkey to suspend keymaps
    o add: support for 8 processors in the command editor panel
    o add: moved to vstudio 2008, requiring different DLLs and acceptance of manifests (grumble gripe grumble)
    o add: region count on maximizer panel
    o add: allow regions to be exactly the same size
    o add: multi-cpu affinity selection (check boxes)
    o bug: maximizer import losing key modifier

  2. #2

    Default

    You're a busy little bee this week, aren't you, Rob? ;P
    Blog : Herding Khats
    Team : Kina - Çroaker - Messkit - Lìfetaker - Wìdowmaker
    Newbie Guides : Multiboxing Vol. 1 - Multiboxing Vol. 2 - HotKeyNet - Jamba
    The Almighty Lax made a liar out of me, apparently I DO get prizes for it.
    *Commences Wielding the Banhammer like there's piñatas up in here and I'm Lady Thor*

    _ Forum search letting you down? Use the custom Google search _

  3. #3

    Default

    Thanks for the updates, Rob!



    Is there a bug summary page somewhere? I'm curious if that bug with left- and right- versions of ctrl, alt, and shift being sometimes converted from one to the other was fixed (someone else summarized the problem excellently, somewhere) This is from the 1.8k time.

    Thanks again for the new features
    Doing my best to get motivated for the WoW Headless Horseman mount hunt of 2013... so far failing. and now in 2018, let's see about those HH mounts! [Edit: Actually got an HH mount in 2018... on separate account 6. One to go! In 2019, my last BNet accout, the main one, got the HH mount. End of an era.]

    I multibox because I have no time, have a life, have a job and[/or] money and have little patience for drama and temper tantrums. -- heffner

  4. #4

    Default

    left and right distinction has not been worked, but is at the top of the list.
    stabilizing this version is the current goal. then i'll start to kick out the rest of the list.

  5. #5

    Default

    I was just trying out the regional keymaps, and I think the idea is great for the way I like to play. One question, though. If I use the command editor to associate a regular keymap with a command, I can get both keymaps to load. But if I manually load a keymap, I can no longer use both types of keymaps...I lose the regional one. What I'm trying to do is have one set of keymaps for my FTL setup, and a set of regional keymaps for formations. But when I change toons around I need to manually load different FTL keymaps while keeping the same regional ones. Is there a way to do this? Wow, I've said keymaps a lot. Did that make sense? ?(

  6. #6

    Default

    can't you use the command keymap for what you need? why are you doing a manual load-keymap?

    it is intended that you would have two keymaps possible; a region based keymap for formations and a keymap associated with the command.

    btw, i have never done the FTL since i use all focus based macros but... could the region based keymaps factor into it somehow?

  7. #7

    Default

    Quote Originally Posted by 'keyclone',index.php?page=Thread&postID=199716#pos t199716
    can't you use the command keymap for what you need? why are you doing a manual load-keymap?
    I do a manual load keymap since I often change which accounts load into various regions (changing from 5 boxing to 3 boxing, running all dps or dps and a healer, etc). I like the regional keymap because it means no matter which toon I have in region1 and region2, they always will move left and right when I use my formation key, but when I do formations using the command keymap and the ftl system, if I change which account loads into region2 I might get both running to the right. It would all be so simple if I always ran 5 toons in the same windows but I never do anything the simple way lol. It's not an emergency, though, since I can just edit the command when I change the windows around.

    As for regional working with ftl, for me they are very complimentary ideas because of the way I'm always changing my group up. Could be a fairly unusual situation, though.

    EDIT: Turns out that if I use the maximizer setting on the shortcut menu from the status window I can just re-maximize the window back into that region and presto, the regional keymap loads up again. Works great and I'm very happy with this solution.

  8. #8

    Default

    o add: 'receive only'; set in command for each wow instance

    o bug: right-click/maximize... options missing; fixed

    first of all i love the "receive only" option, i suggested that about a year ago when i first got keyclone and i'm very glad to see it put in. just 1 suggestion for it though, can you maybe see about putting an option to temporarily ignore it? with DNP on i figured it would ignore "receive only" but it doesn't. i login to 3 wow's on 1 pc and usuallyam already logged into my other 2, so with these 3 set to receive only i have to type in the password manually 3 times, and the blizzard authenticator key 3 times, unless i logout on my main pc and use DNP from there. lemme know if this doesn't make sense what im requesting. >.<

    as for the Right click/maximize thing, i noticed that with 3.0 i couldn't right click world of warcraft on the taskbar and maximize/minimize it, and as of 1.9g that problem seems to still exist. is that referring to some other right click/maximize thing? or was that the bug you were talking about.

    i made a post about this bug a while back and still haven't found a solution to it, which is very frustrating for when i am trying to write macro's on my alt windows cause they're too small to read when they are the default size from maximizer, so normally i would maximize them to full screen to write macros then "restore" when i was done.
    Doostinator, Keirapalmer, Doostina
    Dustinator, Abbynormally, Doostinia
    Dustinpalmer, Dustintalon, Darko, Debbynormall, Abbynormal
    Doostin, Debbynormal
    Delanorra, Delanora

  9. #9

    Default

    i have a problem too with the new version

    when i use mouse broadcasting, keyclone hang up and stop working

    in the others version i havent this problem, is since the new update

    Key is Delete
    << and the Totemwall >>
    Arthas - EU
    Hardcore (!) Multiboxing Guild

    Main Team - Frostknights - World first lvl 85 Multiboxing Team

    Jaldabaoth - Jaracara - Jeretik - Jigarkhvar

  10. #10

    Default Override bug in 1.9g

    Quote Originally Posted by 'keyclone',index.php?page=Thread&postID=199514#pos t199514
    v1.9g
    --
    o bug: override not working properly
    Does this mean you're aware of a bug with override, or does this mean that you fixed a bug relating to it?

    The reason I asked is because I just upgraded from 1.8k to 1.9g and notice that override has a bug where every few seconds, it switches focus to the "reminder" window. So if I'm typing a message in a window, it switches from that window to the "reminder" window, forcing me to have to click back in the window I want to type in.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •