Also Ich hab jez Octupus 1.3.8 das versteh
und maximizer da weiß ich aber net was ich eintragen soll und besonders net wo ich es eintragen soll bei mir steht da
#
# WoW Maximizer configuration file
#
# Open Readme.html for instructions.
#
# Lines starting with '#' are ignored.
# Remove the '#' from a line to use it and set the values you prefer.
## Display resolution. Leave this out to use the current display mode.
# resolution = 800x600
## Display device. Leave this out to use the primary display.
# device = 1
## Keep the taskbar visible. Leave this out to use the whole screen.
# taskbar = 1
## Make room at the bottom of the screen (for autohide taskbar).
## Arguments are top,bottom,left,right
# margin = 0,1,0,0
## Increase screen brightness (gamma).
# gamma = 1.7
## Example 0: Use the current display mode and primary display.
#
# -nothing- This is the default behaviour.
## Example 1: Use 576x432, 32 bits per pixel, any refresh rate.
#
# resolution = 1600x1200
## Example 2: Use 576x432, 60Hz, 16 bits per pixel.
#
# resolution = 800x600
# frequency = 60
# bpp = 16
## Example 3: Use display 2, do not change display mode.
#
# device = 2
## Example 4: Use display 1, change display mode to 1024x768.
#
# device = 1
# resolution = 1024x768
## Example 5: My settings. Use 1600x1200, 75Hz.
#
# resolution = 1600x1200
# frequency = 75
## Example 6: Keep the task bar visible, use the current display mode and primary display,
2 bildschirme also laptop und an dem noch ein bildschirm
ich will mit 2 schamis arbeiten die hab ich auch erstellt und so etc
![]()
![]()
so sehn die beiden chas aus alles gleich die makros die tasten wo sie drauf sind F5-F8
aber iwie gehts net
warum ? xD
BRAUCH ich maximizer oder kann ich auch einfach 2x wow aufmachen und jeweils 1bildschirm für 1fenster nehm
was muss ich wenn ich es brauch beim maximizer eingeben
und was muss ich bei octopus eingeben damit der die F5-F8 tasten übernimmt ? :?: :?:
Connect With Us