PiP maximizer
I thought I set up everything right but I have missed something. I used the videos to help set it up but when I connect the first one starts up goes dark and then as the second starts up the screen flickers continusly and I can't click on anything. Is there a way to reset the keyclone and start from scratch?
Does you monitor resolution have anything do with it. It looks like the maximizer checks the video size.
if your screens are going black, that could be your graphics card.
what type of system do you have? cpu? memory? OS? graphics card? directX driver version?
run dxdiag and check the Display tab to see what directX features your have enabled.
dxdiag
The dxdiag is below, does wow have to be run in windows mode for it to work properly?
Operating System: Windows Vista™ Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.080917-1612)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
BIOS: Phoenix ROM BIOS PLUS Version 1.10 2.3.1
Processor: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2 CPUs), ~2.4GHz
Memory: 3070MB RAM
Page File: 1381MB used, 4967MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 10
DX Setup Parameters: Not found
DxDiag Version: 6.00.6001.18000 32bit Unicode
------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Input Tab: No problems found.
Display Devices
---------------
Card name: NVIDIA GeForce 8800 GT
Manufacturer: NVIDIA
Chip type: GeForce 8800 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0611&SUBSYS_C8013842&REV_A2
Display Memory: 1775 MB
Dedicated Memory: 497 MB
Shared Memory: 1277 MB
Current Mode: 1440 x 900 (32 bit) (60Hz)
Monitor: Generic PnP Monitor
Driver Name: nvd3dum.dll,nvwgf2um.dll
Driver Version: 7.15.0011.7813 (English)
DDI Version: 10
Driver Attributes: Final Retail
Driver Date/Size: 9/17/2008 22:55:00, 5963776 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71E3E-4551-11CF-7745-0AE802C2CA35}
Vendor ID: 0x10DE
Device ID: 0x0611
SubSys ID: 0xC8013842
Revision ID: 0x00A2
Revision ID: 0x00A2
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C ModeVC1_B ModeWMV9_B ModeVC1_A ModeWMV9_A
Deinterlace Caps: left out due to size
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
looks ok... although the amount of dedicated memory seems low.
definitely at a bit of a loss as to what could be causing your issue. could it be a bad graphics card? did you try any of the video performance tests?
What would be a good program to use to stress/performance test the video card?
Posting Rules
Reply With Quote
Connect With Us