Clearing my drop down list

[Coltimar]

I have changed my list of commands several times and changes groups around a lot and my drop down command list if full. How can I clear this or remove entries? I uninstalled/reinstalled but it didn't change anything.

Thanks,
Colt

[Svpernova09]

To make this:


look like this:

Exit Keyclone
Open C:\Program Files\keyclone
Right Click on keyclone.ini and select copy
Right click anywhere in the window not on a file and select paste.
Open keyclone.ini in notepad
Find:

[cmd_history]
count=8
cmd_00=192.168.0.51
cmd_01=192.168.0.50
cmd_02=192.168.0.104
cmd_03=192.168.0.57
cmd_04=192.168.0.58
cmd_05=192.168.0.100
cmd_06=192.168.0.101
cmd_07=192.168.0.59
last=192.168.0.59

You're IPs may be different than mine

Change that block to this:

[cmd_history]
count=0

Click on File, Click on Save. Launch Keyclone and you're connect drop down should be clear.

If something went wrong you should have Copy of keyclone.ini you can open and save as keyclone.ini

[Naysayer]

Setup
Misc
Clear command history (check this)
Press apply

[Naysayer]

Exit Keyclone
Open C:\Program Files\keyclone
Right Click on keyclone.ini and select copy
Right click anywhere in the window not on a file and select paste.
Open keyclone.ini in notepad
Find:

[cmd_history]
count=8
cmd_00=192.168.0.51
cmd_01=192.168.0.50
cmd_02=192.168.0.104
cmd_03=192.168.0.57
cmd_04=192.168.0.58
cmd_05=192.168.0.100
cmd_06=192.168.0.101
cmd_07=192.168.0.59
last=192.168.0.59

You're IPs may be different than mine

Change that block to this:

[cmd_history]
count=0

Click on File, Click on Save. Launch Keyclone and you're connect drop down should be clear.

If something went wrong you should have Copy of keyclone.ini you can open and save as keyclone.ini

You don't have to do all that. You're making it too complicated. :S

[Svpernova09]

Setup
Misc
Clear command history

hmmm, I always did do things the hard way :_D

[keyclone]

if anyone finds themselves fishing around in the keyclone.ini file for something, please let me know so i can give you a UI option for it.

[Coltimar]

Exit Keyclone
Open C:\Program Files\keyclone
Right Click on keyclone.ini and select copy
Right click anywhere in the window not on a file and select paste.
Open keyclone.ini in notepad
Find:

[cmd_history]
count=8
cmd_00=192.168.0.51
cmd_01=192.168.0.50
cmd_02=192.168.0.104
cmd_03=192.168.0.57
cmd_04=192.168.0.58
cmd_05=192.168.0.100
cmd_06=192.168.0.101
cmd_07=192.168.0.59
last=192.168.0.59

You're IPs may be different than mine

Change that block to this:

[cmd_history]
count=0

Click on File, Click on Save. Launch Keyclone and you're connect drop down should be clear.

If something went wrong you should have Copy of keyclone.ini you can open and save as keyclone.ini

You don't have to do all that. You're making it too complicated. :S

Actually, this is perfect. I don't have to start over, I can salvage the ones that are good. The 'clear all' is what I was looking for originally though, thanks a lot.

[Coltimar]

Err . . . I don't have a keyclone.ini file, anywhere.

[keyclone]

you must, if your settings are being saved.

odds are, i'm guessing you are on vista and forgot to 'run-as-admin'. this may result in the file being placed somewhere weird (thx vista)

try running your keyclone by right-click/run-as-admin and see if the settings are still there. if not, then that's the issue.

also, please make sure to update to v1.8k (at least)

[Coltimar]

Yup, I didn't Run As Administrator. I still can't find that file, lol. It's doesn't matter. I am going to run as admin and start it over. New Year, fresh start. I may even switch to FTL! OH NOES!