Quote Originally Posted by 'voodoo5903',index.php?page=Thread&postID=155760#p ost155760
OK well since new expansion my old video card wasnt cutting it Radeon 3450. so i purchased a radeon 4870 and new power supply to go with it. so problem is i can set the 2 screens to clone mode or attached mode. clone mode doesnt work at all so i set it to attached. now with this mode my main WoW screen comes up perfectly. The clones screen use to be nice and even 4 wows. now i cant seem to get it back to that way. the closest i got was all 4 wows lined up but they are much smaller than they could be and dont take up the whole 2nd screen display. the more i mess around the worse it gets. Its probably somthing simple but i cant figure it out. any help woulda be hella cool thanks.
First, your monitors should be in a [1] [2] setup. You've probably already done this, but check it anyway. There is an "Identify" button that will tell you which display windows labels as "1" and "2".

Second, you should draw your regions in Keyclone's maximizer using \\.\DISPLAY2. Also make sure you name your regions appropriately. There is a guide below, but you don't have to follow it.

Third, you have to set up your "commands" in Keyclone to mask each of the 4 slaves to their region.

Main -> No region, so you can maximize, minimize, etc. without using Keyclone to do so.
Account 2 -> region0
Account 3 -> region1
Account 4 -> region2
Account 5 -> region3

If you're still having trouble, load in a pre-defined maximizer setup from Keyclone's website and see what he did. Click on each of the regions and look at their properties.

Good luck!