Macaroon

[zanthor]

One comment -- when I was raiding with Trinity I would sometimes have time (during trash pulls, for instance) where I wanted to tweak a macro for a particular boss (purge dark fiends on m'uru for example) but I'd be in combat thanks to my guild's method of chain-pulling trash. Is there a way to turn off the "lockdown during combat" setting (on macaroon) so that I can still tweak my UI settings while in combat?

I used to write UI mods while raiding... I do dislike the way many things lock down during combat now, but I understand the reasoning behind most of it ... in many cases it's blizzard enforced.... :|.

[delafoo]

I


'm trying to set up the focusless system. My toons are named shockershama-e. Using Macros:
Bind this Macro on each toon to ‘i’ :

/assist
[mod:ctrl,mod:shift,nomod:alt]ToonA;
[mod:ctrl,mod:alt,nomod:shift]ToonB;
[mod:alt,mod:shift,nomod:ctrl]ToonC;
[mod:ctrl,mod:alt,mod:shift]ToonD;
[mod:ctrl,nomod:alt,nomod:shift]ToonE
/cast [harm] Lightning Bolt
/targetlasttarget
with it, I exceed the character limit. How can I make a 255+ character limit macro with this?
I'm using the tutorial here:
http://www.dual-boxing.com/wiki/inde...aderless_Setup

Thanks.

Are you creating the macro in WoW's default macro editor, or using the one built into Macaroon?

Well, I'll probably sound like a n00b for asking this, since yes, I was using the Blizzard macro editor. Looking at the command list at the download link here: http://www.wowinterface.com/download...-Macaroon.html I didn't find any obvious /macro commands, and none seemed apparent in the addon either.

So, How do I start a new macroo using macroon?

Thanks for your replies.

~BB

[Dragonshadow]

I


'm trying to set up the focusless system. My toons are named shockershama-e. Using Macros:
Bind this Macro on each toon to ‘i’ :

/assist
[mod:ctrl,mod:shift,nomod:alt]ToonA;
[mod:ctrl,mod:alt,nomod:shift]ToonB;
[mod:alt,mod:shift,nomod:ctrl]ToonC;
[mod:ctrl,mod:alt,mod:shift]ToonD;
[mod:ctrl,nomod:alt,nomod:shift]ToonE
/cast [harm] Lightning Bolt
/targetlasttarget
with it, I exceed the character limit. How can I make a 255+ character limit macro with this?
I'm using the tutorial here:
http://www.dual-boxing.com/wiki/inde...aderless_Setup

Thanks.

Are you creating the macro in WoW's default macro editor, or using the one built into Macaroon?

Well, I'll probably sound like a n00b for asking this, since yes, I was using the Blizzard macro editor. Looking at the command list at the download link here: http://www.wowinterface.com/download...-Macaroon.html I didn't find any obvious /macro commands, and none seemed apparent in the addon either.

So, How do I start a new macroo using macroon?

Thanks for your replies.

~BB

Make a bar, alt+click the macaroon minimap button, then right click an empy button on a mac bar. Now input your macro code. I don't yet know how to make it have a specific icon.

[zanthor]

Leaderless/Targetless - Focus Based Hydra[/url] , all I need to do is Bar target = focus, custom state as target=focustarget,exists , and then set all the buttons as actionIDs instead of "macro"?

(I'm Dragonsblaze from wowinterface Maul :P)

Yup! Or maintain the macros with the targeting info you want [/quote]Ok, I'm apparently failing on this... Any chance for a walkthrough on how to make this happen?

[delafoo]

I'll try that tonight, hopefully , day 3, I can get the focusless system working :P

I appreciate the reply

[zanthor]

Ok, Still on the low capacity educational conveyance... but at least I got it in gear.

/mac create bar - Adds a bar...

Right click that puppy...
Click button count... add your buttons.... I did 12...
Right click again... Check the "Custom" box.

In the custom states...
[target=focustarget,exists]

I can get the bar to show up and disappear, I'd really rather it always be there, but either way try as I might I can't get it to cast on a focustarget...

[Dragonshadow]

Ok, Still on the low capacity educational conveyance... but at least I got it in gear.

/mac create bar - Adds a bar...

Right click that puppy...
Click button count... add your buttons.... I did 12...
Right click again... Check the "Custom" box.

In the custom states...
[target=focustarget,exists]

I can get the bar to show up and disappear, I'd really rather it always be there, but either way try as I might I can't get it to cast on a focustarget...

I tried that aswell, kept telling me "You need a target".

[zanthor]

Ok... I've got this working!!... not perfect, but reasonably.

/mac create bar - Adds a bar...

Right click that puppy...
Click button count... add your buttons.... I did 12...
Right click again... Check the "Custom" box.

On the bar name, name it something.
On the bar target, put targettarget
In the custom states...
[target=focustarget,exists]

Type /mac bind and mouseover your newly created bar and bind your keys...

I also /mac edit and then left click on each button til it says "action..." and then right click and set it to the right button ID (1-12 for the first toolbar)...

Now I have a bar that disappears if I have no focus... and disappears if the focus has no target. However it DOES work the way I want it to, if the focus has a target, I nuke it. If not, I nuke my target.

So I've setup a 2nd toolbar, did the same things for it without keybinds and without the custom state, but is that really teh best way to do this?

[Pocalypse]

Just wanted to extend my own thanks to you Maul. Multiboxing would have been a much more complicated beast to tame if it weren't for Trinity and now Macaroon (which I much prefer so far).

So, excellent job, and thanks again!!!

[zoneblitz61]

Ok... I've got this working!!... not perfect, but reasonably.

/mac create bar - Adds a bar...

Right click that puppy...
Click button count... add your buttons.... I did 12...
Right click again... Check the "Custom" box.

On the bar name, name it something.
On the bar target, put targettarget
In the custom states...
[target=focustarget,exists]

Type /mac bind and mouseover your newly created bar and bind your keys...

I also /mac edit and then left click on each button til it says "action..." and then right click and set it to the right button ID (1-12 for the first toolbar)...

Now I have a bar that disappears if I have no focus... and disappears if the focus has no target. However it DOES work the way I want it to, if the focus has a target, I nuke it. If not, I nuke my target.

So I've setup a 2nd toolbar, did the same things for it without keybinds and without the custom state, but is that really teh best way to do this?

I believe so. I think maul stated earlier in this thread that this is the design of macaroon. When the bars have targets and the buttons have Actions ID's, the bars only show when the targeting is true (i.e. you have a target or a your focus has a target in this case). However, if you use macro buttons and assign each button a macro with the target in the code, i think the buttons are supposed to always show. I could be wrong though, but thought I read that in one of maul's earlier posts. Anyways if you want to use your leaderless/target setup thing like in your thread, I think the way you did it above is the best way to do it, otherwise you have to input the target code for each individual button.