keyclone uses a p2p network architecture. the best, lowest latency, structure would be one central keyclone with the other machines connecting INTO the center. the best way to do this is using the keyclone/setup/general/auto-connect option. just check the box and put the ip and port of the main keyclone into the field to the right.

there is no need to have the center connect to the others, as all you need is one connection.

if the connection is established, you should see a line for every connection in the keyclone list.. which will contain the ping times (usually 0ms) and the Bps (bytes per second) received and sent