Close
Showing results 1 to 10 of 10
  1. #1

    Default Wow crashes during 3-boxing, wow was unable to start up 3d acceleration

    Hi guys, i recently started multiboxing(3box) on the same computer. but i constantly gets an error when im to launch wow.
    ok so i start the Keyclone(got it all setted up, launch world of warcraft through keyclone and i play for like 10min, then usually one instance of wow freezez, so ill bring the kill the instance and restart the one from keyclone. but then i always the this message

    Code:
    World of Warcraft was unable to start up 3d acceleration. Please make sure DirectX 9.0c is installed and your video drivers are up-to-date.
    DXDIAG:
    Code:
       Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_qfe.070227-2300)
           	Language: Swedish (Regional Setting: Swedish)
    System Manufacturer: FUJITSU SIEMENS
       	System Model: D1826-G
               	BIOS: Version 5.00 R1.05.1826
          	Processor: Intel(R) Pentium(R) 4 CPU 3.40GHz (2 CPUs)
             	Memory: 1022MB RAM
          	Page File: 862MB used, 1598MB available
        	Windows Dir: C:\WINDOWS
    	DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
     	DxDiag Version: 5.03.2600.2180 32bit Unicode
    and dont start to work untill i restart my computer.
    anyone else got this problem, or know what to do?
    3x shaman:
    Fyffex Fyffez Fyffef
    Spinebreaker eu
    2008-10-18 = level 62

  2. #2

    Default

    Bump, i really need help guys
    3x shaman:
    Fyffex Fyffez Fyffef
    Spinebreaker eu
    2008-10-18 = level 62

  3. #3

    Default

    This may or may not help, but is the one client that is lockup up running questhelper? There are some known unresolved bugs where questhelper can crash clients. Once I hit 70 on my shamans and got rid of all my quests and started doing just dailies I could no longer run questhelper on my shaman team without crashing. Works just fine on my leveling teams.

    If you are not running questhelper try disabling all your addons and playing for a bit. It could very well be because of some addon that is out of date and causing issues.

  4. #4

    Default

    Tnx for actually reading and trying to help me, i dont run questhelper and it didnt work. im starting to think its my graphic card who dont seem to work out, my processor should be ok , heres some of my hardwares:

    Pentium4 3.4 Ghz dualcore
    1gb ram(maybe this is the problem?)
    Radeon x1300 series 256mb
    3x shaman:
    Fyffex Fyffez Fyffef
    Spinebreaker eu
    2008-10-18 = level 62

  5. #5

    Default

    I would try running just the instance of wow that crashes for a while and see if you still get the issue. If you do this and have all addons disabled then you should be able to get help on the wow technical support forum. Isolating the issue should be your top priority at this point and doing both steps will help in that regard.

  6. #6

    Default

    I recall having the same issue several months ago when I ran all my instances from the same folder of WoW. I solved the problem by making three folders of WoW.

  7. #7

    Default

    okok, tho i already got 3 folders. ima try with 1500mb ram now, if it works i'll buy 500mb more,
    3x shaman:
    Fyffex Fyffez Fyffef
    Spinebreaker eu
    2008-10-18 = level 62

  8. #8

    Default

    Your RAM is a little low for running 3 instances of wow. What FPS do you have going on your main and clones? If you did not throttle it down you will have issues with your set up, I have 4Gigs of ram in my machine and sometime it runs slow.

    I throttle my main to 45fps and my clones to 15fps and it runs well, I could probably go up to a lot more but it works perfectly well at 45 and 15 for clones. It slows down some when I start my 4th account.
    Daggerspine Alliance: Phoebus(Tank), Soozanuna(Heals/Tailor), Angakak (Enchanter), Wakantanaka(Herb/Alch), Znakharka, Jonhyone(JC), Marious(Other Tank/BS), Magnux(Enchanter), Coyolxhauqui(LW)

  9. #9

    Default

    Well marious, i have trottled it down, MUCH! :P ive been searching for the fault and now when i throttled the clones down to 5fps (lol yea i know) and main 25fps it takes 1gb of ram, so im off buy 1gb more, then i got 2gb, if i makes it go for about 15 fps on clones and 40 on main u think that should work?
    btw all, Ty so much for trying, it hasnt crashed a single time since i put in 500mb more in ram

    GOD i love multiboxing when i reach 70 with these shammys im off to run hunters, (Wotlk ftw) and since ive reqruited myself i can give 60 levels, and im gonna give em to a 24 warrior:P

    LOVE YOU GUYS! <'3
    3x shaman:
    Fyffex Fyffez Fyffef
    Spinebreaker eu
    2008-10-18 = level 62

  10. #10

    Default

    Well, you made two changes: Added RAM and reduced FPS. So while you know one of those caused the problem, you don't know exactly which one. While adding RAM is always a good thing to help PC performance, my bet is the X1300 is not quite up to the task of running all your clients at a higher FPS. I would spend the next day or two playing with the RAM and your current reduced FPS to make sure your system is stable. After that, then start bringing your FPS up and see if it starts crashing again. If not, congrats! If it does crash then lower your FPS until it stops crashing or buy a new vid card.
    Altaholic

Similar Threads

  1. Need help to start dual-boxing
    By Nicolay91 in forum New Multi-Boxers & Support
    Replies: 2
    Last Post: 03-13-2009, 07:29 AM
  2. 3D acceleration/multiple copies
    By Vikodin in forum New Multi-Boxers & Support
    Replies: 2
    Last Post: 10-03-2008, 04:19 PM
  3. Computer crashes after a few mins of 2 boxing
    By Samsonite in forum New Multi-Boxers & Support
    Replies: 12
    Last Post: 07-21-2008, 06:49 AM
  4. How do i Start Boxing
    By Bigbooo in forum New Multi-Boxers & Support
    Replies: 6
    Last Post: 06-21-2008, 08:09 PM
  5. Server crashes when i start it.
    By major314 in forum Software Tools
    Replies: 4
    Last Post: 05-26-2008, 02:29 PM

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •