Close
Page 2 of 2 FirstFirst 1 2
Showing results 11 to 19 of 19
  1. #11

    Default

    Quote Originally Posted by 'Drizzit',index.php?page=Thread&postID=115299#post 115299
    Quote Originally Posted by 'thesavagetony',index.php?page=Thread&postID=11529 8#post115298
    In all seriousness, when my guys die, I target the mob I want to kill, turn the other ones with Q/E as needed and blast away.
    How do you target the mob so all the other toons target the same mob? assist is on your main and your main is dead. If you use tab there is a chance that your toons will target other mobs... sry for all the what ifs (i'm a programmer and always have to ask the what ifs and think of ways to break stuff).
    When you die, you dont release right away so I just click the mob on the main guy.
    HEY YOU! YEAH, YOU! YOU, THE ONE WHO CAME HERE AFTER SEEING SOMEONE MUTLIBOXING AND JUST GOT HERE

    Antec Twelve Hundred Case
    eVGA 680i LT Mobo
    e6600 CPU
    XFX 9800GX2 GPU
    1200W PSU
    28" Hanns-G Monitor
    Logitech G9 Mouse
    Logitech G15 Gaming Keyboard

  2. #12

    Default

    Change is good. Don't fight it...embrace it..

    /hippy_tree_hugger_mode off

    :P
    Everquest II - <Pain for Glory> on Nektulos Server
    (Shadowknight: Uhmono| Inquisitor: Blyssia | Warden: Wysh | Defiler: Gahealju | Troubador: Moxia | Warlock: Phyrloc) X 51
    (Guardian: Tukilu | Templar: Ajechu | Warden: Fayanna | Conjuror: Akaesia | Troubador: Lollah | Warlock: Onona) X 27-ish[/align]

  3. #13

    Default

    Quote Originally Posted by 'Frosty',index.php?page=Thread&postID=115382#post1 15382
    Change is good. Don't fight it...embrace it..

    /hippy_tree_hugger_mode off

    :P
    Your Profile Picture is awesome, by the way.
    HEY YOU! YEAH, YOU! YOU, THE ONE WHO CAME HERE AFTER SEEING SOMEONE MUTLIBOXING AND JUST GOT HERE

    Antec Twelve Hundred Case
    eVGA 680i LT Mobo
    e6600 CPU
    XFX 9800GX2 GPU
    1200W PSU
    28" Hanns-G Monitor
    Logitech G9 Mouse
    Logitech G15 Gaming Keyboard

  4. #14

    Default

    Quote Originally Posted by 'thesavagetony',index.php?page=Thread&postID=11538 7#post115387

    Quote Originally Posted by 'Frosty',index.php?page=Thread&postID=115382#post1 15382
    Change is good. Don't fight it...embrace it..

    /hippy_tree_hugger_mode off

    :P
    Your Profile Picture is awesome, by the way.
    Thanks, but I can't take credit for it. I found it randomly on the internet one day.
    Everquest II - <Pain for Glory> on Nektulos Server
    (Shadowknight: Uhmono| Inquisitor: Blyssia | Warden: Wysh | Defiler: Gahealju | Troubador: Moxia | Warlock: Phyrloc) X 51
    (Guardian: Tukilu | Templar: Ajechu | Warden: Fayanna | Conjuror: Akaesia | Troubador: Lollah | Warlock: Onona) X 27-ish[/align]

  5. #15

    Default

    There is a difference in speed, noticeably if your eye is lag-trained enough as mine is; with Focus, in PVP especially where Patience checking targets is a luxury you don't have, I noticed my Focus target takes a solid second+ to update and more often than not my Main was spamming by himself or 1-2 of the 5, while my alts were on wrong/old/no targets; with my newer Focus-less Assist-based setup, the update time has been in view and in practice noticeably quicker, particularly in pvp where it boils down to bullet-time reactions. After I switched my targets were updated quicker and more reliably every time.
    Not Currently Boxing
    IRC Excerpt:
    Drayth> Finish this set: Spaceturkey Lazurturkey Moonturkey Starturkey - and no, don't say Sunturkey.
    Fursphere> Moonturkey? Drayth> Look at #3...lol - Fursphere> damnit...Starturkey?
    Fursphere> FUCK. - Drayth> lol... * Fursphere gets on the failboat

  6. #16

    Default

    Quote Originally Posted by 'Eteocles',index.php?page=Thread&postID=115441#pos t115441
    There is a difference in speed, noticeably if your eye is lag-trained enough as mine is; with Focus, in PVP especially where Patience checking targets is a luxury you don't have, I noticed my Focus target takes a solid second+ to update and more often than not my Main was spamming by himself or 1-2 of the 5, while my alts were on wrong/old/no targets; with my newer Focus-less Assist-based setup, the update time has been in view and in practice noticeably quicker, particularly in pvp where it boils down to bullet-time reactions. After I switched my targets were updated quicker and more reliably every time.
    How often do you change your focus in pvp?

    • Also, how can assist be used to switch "mains" in pvp? ( for instance, if you use an /assist based setup , and your main dies... how do you switch everyone over to follow the next in the line up? )

  7. #17

    Default

    My Main char was my Focus and assists were based off assisting the Focus in pvp and pve alike; I didn't change Focus at all(which was a problem when my main died and I tabbed over but I was still a tri-boxer then so no big loss)

    I now use a macro based off targeting/assist:
    /tar (target=Main, nodead), (target=Alt1, nodead), (same for alts 2 3 and 4), (target=Main){without the nodead tag it defaults to him if the entire group is dead so I can still corpse run, but uses the highest living alt as lead so I can alt-tab through them if I lose my main}
    /follow
    /assist
    /stopcasting

    That is my "Big button" courtesy of Zyzzfxzxczxfcs(or whatever his name was lol) and has worked quite well so far as a single button solution for both Assisting and Single same-key Lead-switching ;p
    Not Currently Boxing
    IRC Excerpt:
    Drayth> Finish this set: Spaceturkey Lazurturkey Moonturkey Starturkey - and no, don't say Sunturkey.
    Fursphere> Moonturkey? Drayth> Look at #3...lol - Fursphere> damnit...Starturkey?
    Fursphere> FUCK. - Drayth> lol... * Fursphere gets on the failboat

  8. #18

    Default

    Well, posting here so i can find this later tonight. I I've been using nothing but focus going 1 to 65.
    Norgannon
    Paladin x 1 - Level 70
    Paladin x 4 - Level 26
    Shaman x 4 - Level 70
    Warlock x 1 - Level 62
    Warlock x 4 - Level 10
    Hunter x 1 Level 15
    Hunter x 4 Level 10

  9. #19

    Default

    My main spell casting macros consists of:

    /cleartarget
    /cast [target=focustarget] Chain Lightning

    My "slaves" never target anything, they only use the "master's" focus target. This is a little of an advantage in pvp because players that have my slaves targeted, don't realize that I have them in my sights until it's too late.

    I have a heal spell that goes like this:

    /stopcasting
    /cast [target=focustarget,help.nomod][target=focus,nomod] Lesser Healing Wave
    /cast [target=player,mod:alt] Lesser healing Wave
    /cast [target=focustarget,help,mod:shift][target=party1,mod:shift] Chain Heal

    This is a modified version taken from the Wiki. I added /stopcasting because I hate waiting for a spell to complete first and I added party1 instead of a toon name. This mother of all heal casting macros will heal my main's target if he has a target and if he doesn't, they will heal my main. If I hold alt, everyone heals themselves. If I hold shift, they cast chain heal on my main's target if the target is friendly, if not, they cast chain heal on my main.

    But as far as the topic is concerned, I think the "speed" difference between assist or focus is subjective. For example, I was shocked when I read above that someone had a good experience with /assist over /focus. My experiences have been the opposite.

Similar Threads

  1. Assist Focus vs. Focustarget
    By Rumble_Pack in forum German
    Replies: 3
    Last Post: 02-02-2009, 08:05 PM
  2. Did they change Assist/Focus?
    By sqeaky4100 in forum New Multi-Boxers & Support
    Replies: 1
    Last Post: 12-17-2008, 02:04 AM
  3. better to /assist party1 or focus?
    By warzer in forum New Multi-Boxers & Support
    Replies: 1
    Last Post: 08-30-2008, 12:24 AM
  4. Assist und Focus
    By Sephice in forum German
    Replies: 5
    Last Post: 07-30-2008, 02:42 AM
  5. Focus-free assist
    By unit187 in forum Macros and Addons
    Replies: 9
    Last Post: 01-31-2008, 02:14 PM

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •