Keyclone crashing.

I start up keyclone, and let my instances load up. One loaded up i start to login, Now its randon at which point it happens as its happen when ive been switching PiP and its happened when ive been ingame all logged in and ready to go.
All that happens is Keyclone crashes and i get the "Send Report" "Dont Send" thingy in the middle of my screen. So then i have to close all my instances down and reload keyclone.

Could anyone help me with this problem please.
On a side note. Is there anyway to load Keyclone on its own? So that Maximizer doesnt load up the instances until i want to?

Thanks for any help.

Preddz

Sorry, no ideas on the crash. I'm sure Rob will chime in, he's good like that. :)

Quote:

---

Originally Posted by 'Preddz',index.php?page=Thread&postID=59453#post59 453

On a side note. Is there anyway to load Keyclone on its own? So that Maximizer doesnt load up the instances until i want to?
Preddz

---

iirc, in the "general" section, towards the bottom, is the check box you're looking for. I can't remember what it's called, but it's pretty obvious what it does. You just need to uncheck that and then you'll have to manually have it launch the wow instances after you start keyclone. Sorry I can't be more specific, I'm not at home right now.

Thanks for the info, Ill look in general now.
Edit : After stopping fapping about and actually looking at some stickies ive found how to load them manually Thanks for the help. <3 diamondzngunz
Edit2 : Crashing still happening :( I cant think of any more information i could add really, Only that this time i was logging in my 4th instance and it crashed.

This is what im getting.....
Error signature
AppName: keyclone.exe AppVer: 1.8.6.0 ModName: keyclone.exe
ModVer: 1.8.6.0 Offset: 0000b0dc

try removing the keyclone directory.. ini file and everything.

then, download directly from the main site: http://solidice.com/keyclone
install and run normally (do both as admin if you are on vista)

let me know if that helps

It wont reset my Licence will it?
I dont fancy paying for another altho its VERY much worth it :P

no worries.. your license is forever.

if your system-id changes (which only happens on hardware changes and/or os re-installs)... i'll gladly transfer your license to the new system-id

and yes.. you should upgrade your keyclone whenever you like.

your license is forever, which means... free updates as well

Ok reinstalled everything, Still crashing.
Anything else i can do?

Bump.
Still having problems with this :( :(

check to see if you have anything running. download the install... close the browser.. then right-click on the install binary and run-as admin.

once installed... drag the icon to the desktop.. and right-click.. run-as admin.

if that still crashes, then you either have a bad download (you did get it from http://solidice.com/keyclone .. didn't you), or a corrupted mfc71 dll is loaded in memory and being used by some other program. try turning off anything you see in your tool tray (lower right)... then re-running (always as admin)

if you still have no luck, voice comms would be easier. let me know if that's the case

Don't know if it is related but I have had a consistent crash with Keyclone (I'm on version 'g') that seems related to PiP and since the OP mentions PiP I thought I would mention it here. I'm not 100% sure on the repro steps but basically if I hit the "mute" button (the one that stops keys going to windows other than the main) pretty much immediately after hitting a PiP button, I get a Keyclone crash. I find that as long as I wait a second or two after hitting PiP and then hit the mute button, everything is ok. But if I am doing it too fast, boom, crash every time. Don't know if this is a known issue or something new, but it is 100% reproable so I thought I would mention it (especially if during the OP was using PiP and the mute button to switch between clients logging them all in).

Wondering if hitting the mute button too quickly is causing some key message that PiP relies on to be sent through to not turn up and so your app blows up, yay for making assumptions about your app! :)

Hope this helps, or you can give some feedback.

Team Harry.

@TeamHarry

hmm.. i hadn't heard that one. i'll have to check that when i get home.

Quote:

---

Originally Posted by 'Maiden4Life',index.php?page=Thread&postID=60128#p ost60128

Don't know if it is related but I have had a consistent crash with Keyclone (I'm on version 'g') that seems related to PiP and since the OP mentions PiP I thought I would mention it here. I'm not 100% sure on the repro steps but basically if I hit the "mute" button (the one that stops keys going to windows other than the main) pretty much immediately after hitting a PiP button, I get a Keyclone crash. I find that as long as I wait a second or two after hitting PiP and then hit the mute button, everything is ok. But if I am doing it too fast, boom, crash every time. Don't know if this is a known issue or something new, but it is 100% reproable so I thought I would mention it (especially if during the OP was using PiP and the mute button to switch between clients logging them all in).

Wondering if hitting the mute button too quickly is causing some key message that PiP relies on to be sent through to not turn up and so your app blows up, yay for making assumptions about your app! :)

Hope this helps, or you can give some feedback.

Team Harry.

---

I've been having that too, didn't think it was too noticable to mention as I just learn't to wait a few before I pressed it.

Basically Rob, if you have say 4/5 windows on 1 comp and I press say F11 for my 4th window and hit pause right after, it gives a error and says Keyclone has been shut down. I just exit all my clients and restart.

Hope that helps.

I also have version g crashing. Just an fyi. :)

pip swap then 'pause' ? are you answering a whisper on a different screen? (i don't remember ever doing this combination before)

Quote:

---

Originally Posted by 'keyclone',index.php?page=Thread&postID=60277#post 60277

pip swap then 'pause' ? are you answering a whisper on a different screen? (i don't remember ever doing this combination before)

---

I was doing it for chatting in Thunder Bluff mainly last night. Getting tells on different characters buggers me up. :)

Quote:

---

Originally Posted by 'keyclone',index.php?page=Thread&postID=60277#post 60277

pip swap then 'pause' ? are you answering a whisper on a different screen? (i don't remember ever doing this combination before)

---

Yeah that happens or more commonly, I am levelling up and so have new spells to put key bindings on. So I am in the process of swapping to all the screens and adjusting macros or key bindings (hence the need to unpause -> PiP -> pause again). If I switch too fast and hence hit pause too fast, it crashes. Note that I also have 5 WoWs running as I 5-box.

I had a few issues with keyclone crashing but assumed it was due to my crappy comp being unable to handle 5 wows and keyclone with lack of resources leading to one of them closing.

That being said, it did only happen in safe places when I was handing quests in or getting ready to log. I think alot of the time I was switching to one toon to do this (once due to having all bag spaces full, so had to run to the vendor, and the other times to mail items/go and train) and pausing keyclone so I didn't forget it was running and make my alts do crazy things while I wasn't 'watching' them.

ok i got this product and i started up it said expired license so i go and buy one then when i started it crashes every time no matter what i itry restarting my pc and reinstalling it i had 2 wow windows open in this pics but the same happens if they aren't and after a full re install i dont wanna pay for something i cant use i hope you understand and can come to a solution i also send the information to the wrong email if thats any use i send it to gearspark24war gmail instead of hellrider24war@gmail.com please take a look at my problem http://s604.photobucket.com/albums/t...arspark/Error/

please remove the existing keyclone folder and download the latest version, v1.9h. when you run it for the first time, it will present you with a setup wizard. the default settings are usually enough for most people, just remember to input your account names. when it's done, it will run all your wows in the layout you chose.

if you are still having issues, please drop me a note.

My Keyclone is still bugging!

I deleted all folders and all things of Keyclone and then i downloaded the new version from the off homepage, but iam still getting the same error!

Keyclone was running on my PC till i closed it for some hours and after that time iam always getting this error

Pls tell me a way to fix this bug


http://img269.imageshack.us/img269/7...benanntcjo.jpg

sadly that was the latest version and as photo bucket shows it wont let the wizard start up that was my first time starring the program with a valid license the other time the license was expired and it open fine i deleted the files and re un zip the program yet it still happens

read this: Keyclone crashing immediately on brand new subscription

I am running Vista, So I install as admin and run program as admin, made sure that I downloaded from http://www.solidice.com/keyclone/key...19jul2009a.exe. Tried copying .exe to desktop. Crashes immediately can not even run program. :cursing: I too just paid for program and cannot run. Any help that you can give to get me up and running would be great. djkenjr@gmail.com

please read the post above (#23)

Thanks I saw the 2nd page after I posted. (am idiot sorry). Thanks for the help.

no problem.

btw, i have just pushed out a hotfix for the setup wizard, so please update to v1.9i, available here