Printable View
Recorded a BRD run with bosses up to emperor aswell since I still need a few items from them, so total it took 55 minutes, maybe I could do it faster but after the demoralizing shout change AoE is quite alot harder.
https://www.youtube.com/watch?v=RzAl6fedtME
Nice video. That team comp works well together. Thanks for sharing.
thanks for sharing.
I really like your group display.
What addons are you using?
How do you get the boxes next to and above? And able to click them? Is that through Video FX?
Im currently using Vuhdo + VFX for the group display, the small display with the same colors are for buffing/decursing are also vuhdo.Quote:
Originally Posted by Acidburning
I think I will move to Grid2 soon though, the setup in Vuhdo is so confusing and the buffing isn't working 100%, i can't get it to recognize Arcane Brilliance/Prayer of Spirit and Fortitude.
The boxes next to is clickbars with weakauras on each character show through VFX.
Addons: Vuhdo, details, Lorti UI, Kui_Nameplates, EMA, Prat, ClassicCastbar.
TradeSkillMaster with account sync to see what I have on the others, Tbag to be able to browse through bank/other character on the same account.
Very nice video - thanks for sharing. What are your thoughts on shaman vs another mage or lock in your setup? I'm running war/pri/2xmage/lock and considering swapping one mage for a shaman for the utility.
I like totems alot, the levelling experience suffered quite alot by not having the extra AoE though, the shaman isn't lacking far behind now at 60 even with me doing quite alot of AoE.
Shaman was huge benefit in UBRS aswell with Beast's AoE fear.'
I think the difference in DPS can be explained by having to drop totems every other pack aswell.
Baron rivendare:
https://www.dual-boxing.com/attachme...tid=2221&stc=1
Overall:
https://www.dual-boxing.com/attachme...tid=2222&stc=1
This is amazing info, thank you! I will refer to this when I do a full revamp of my setup in the near futureQuote:
Originally Posted by Quiding
how are you tracking totems timer ? have try'd with WA but cant make it to work (cant track party totems:( )
Check out the weakaura I posted, it probably can be used to display party totems. You'd need to rejig it, but I don't see why it wouldn't work.Quote:
Originally Posted by Imposibil
Uhm, can you point me to it please ?Quote:
Originally Posted by Mercbeast
Also , all this time i have only been using TMW so WA is a bit "clunky" to me, i would appreciate if you also point to what changes i need to make (if is the case).
Thanks
This is my WA totem: https://pastebin.com/ezLsNGb4Quote:
Originally Posted by Imposibil
The vfx I use for it: https://i.imgur.com/dXs9YWE.png
Clickbars on top of it to use them manually when I need to move them, like in BRD with the respawning mobs before second last boss.
oh so you are tracking the totems timer with a VFX ...
ok that was the big question , i already have clickbars set for each totem i need, i was only interested in the tracking thing, i tought you are tracking them directly from the warrior ...
thanks anyway
When I watch videos like this I end up spending like 4 hours trying to make my setup half as good then giving up and being very sad. I'd probably be willing to send someone actual money for a really in depth vid of how to setup ISBoxer with the addons to make something that functional looking.
I've enjoyed boxing since 06 but I know fuckall about the 129834576 drop downs in ISBoxer. Shit makes me miss macros and keyclone. I feel like you need a software engineering degree to understand even the "tutorial" stuff.
Have you watched Dalo's videos? He does some real short and simple ones on various topics.Quote:
Originally Posted by Celosar
Very nice video and extremely impressive setup. I definitely have a lot of work to do in the future with my setup after seeing yours.
Insane looking video. WOuld you mind sharing those WA's with me? I am currently in the process of getting my setup ready to start multiboxing again for classic. Used multiboxing to get realm first level 90 monk when MoP was released, but havent touched it since due to school etc.Quote:
Originally Posted by Quiding
Thank you:)
Edit: And also the clickbars you mentioned yesterday. That would be great. "Clickbars on top of it to use them manually when I need to move them, like in BRD with the respawning mobs before second last boss."
Quote:
Originally Posted by Akumatv
The 4 WA's I use on the alts are very similiar, just different spell ids or item count on shards.
This is the warlocks: https://pastebin.com/nPJ5RV6n
No idea how you use/copy paste the clickbars but here they are
WA Clickbar: https://pastebin.com/xwZjB8z6
Totems: https://pastebin.com/psnLYcxL
One more favor if you would be so kind, could you export the vuhdo settings aswell? Yours looks perfect imo, the settings for each char I wont have a problem setting up once I get to a certain level and get the required spells.
Thank you for all the help so far! Really appreciated!
Awesome video mate very impressive! Cant wait to start doing BRD myself
I am going to link your vid in my youtube channel as well
How quickly do the shammy and lock go oom compared to the mage?
Thats an awesome setup.Quote:
Originally Posted by Quiding
Do you think you could share your ISB profile please ?
vuhdo from priest: https://pastebin.com/mgZU1W4wQuote:
Originally Posted by Akumatv
Still havent figured out 40man setup.
Depends on the fight, on AoE lock and mage go oom at same time since im not AoE specced on warlock anymore, so any hits pretty much interrupts hellfire.Quote:
Originally Posted by dalo199
Single target I would say when shaman goes oom mage is still +50% same with lock, on lock I used life tap in the rotation now.
I started this profile kinda copying SerScruffington's BFA setup, it might be a bit messy.Quote:
Originally Posted by Morehei
https://pastebin.com/raEVYLQP
Quiding = Warrior, Quidingab = Priest, Quidingac = Shaman, Quidingad = Mage, Quidingae = warlock
Your setup is amazing, thank you so much for sharing! For your DPS casters do you have it setup where one button is single target and fires off a frostbolt/shadow bolt/lightning bolt? And one button is DPS where it fires off nova/hellfire/chain lightning? How are you balancing in the warlock dots that I see periodically? Is there some sort of cast sequence for that?
When I get home from work tonight I am going to play around with replicating this. I currently am trying a warr/priest/mage/mage/lock setup. I leveled my priest to 60 with some friends so the boxing is my project when not doing guild stuff.
Thanks again!
/castsequence [nochanneling]reset=target/15 Corruption, nullQuote:
Originally Posted by Carto
/castsequence [nochanneling]reset=combat Shadow Bolt, Shadow Bolt, Shadow Bolt,Shadow Bolt, Life Tap, Shadow Bolt,Shadow Bolt, Life tap
Is the trash macro for lock, seems to work OK.
For boss I have separate key runs it without corruption and then use timers in ISboxer and Curse of shadow aswell
And yes separate key for AoE
Impressive video.
I must ask, how did you get "party cast bars", I cant find any addon for it :-/
coming home tired as hell from being on the road from 05 until now (22) I suddenly feel the urge to stay up and configure my setup after reading the new posts on your thread. Like a lot of people has said already, crazy good setup.
I see people asking a lot of questions I havent even thought about. Any chance you might be able to go a bit into detail about your setup? macros, the timers you're talking about in ISboxer, the extra bars that you say is set up with vuhdo for decursing, how you're using tsm and tbag to see all the chars on one char, link to all your WAs for each char (yes I understand that little about that kind of stuff xD) next to the VuhDo, etc etc. Would be really appreciated as I have no clue where to start with this. All i've used in the past is keyclone. This is WAY more complex from the looks of it.
This is very impressive.
Both clean and effective UI and though lots of different classes it is still pretty much a standard Tank+Healer+3 ranged DPS setup (Mage+Warlock+Shaman).
I am only at 33 minutes so far but plan to finish.
Thanks for sharing video and even more importantly details on your setup. I will likely download & study the files as well.
Great job!
Quiding nice video and UI set up :cool:
You mention switching to Grid2, that's what I used in Retail but atm in Classic I'm just going with the blizz raid frames because they aren't so bad really.
I have the player, target and the swing timers centrally, similar to you, but find I don't care about swing timer much when boxing. Does it become critical at level 50+?
Looks like a weakaura. Just press New -> Progress bar -> change trigger type to Status -> choose Casting from the drop-down -> select the unit to be party1. Finally duplicate it 3 times for party2/party3/party4.Quote:
Originally Posted by tjuren
Thanks a ton, got castbars working =)
Quote:
Originally Posted by Wizeowel
ElvUI has the option to enable party cast bars, sort party/raid alphabetically, pixel perfect grid configuration for all frames, loot filtering, customizable buff/debuff white/blacklist and you can create profiles to conveniently export/import your entire UI setup between teams.Quote:
Originally Posted by tjuren
I don't understand why everybody isn't using. It's been on my essential addon list for boxing since Wrath.
This is how I did it but with character names instead of party2 because of UBRS runs with randoms, it will also be a problem in raids.Quote:
Originally Posted by Wizeowel
The trigger doesn't seem to work correctly though, I read somewhere they wanted the castbars to have a vanilla feel to it, maybe the problem is in the client? I don't know.
Macros: The macro already posted in the thread for warlock and shaman lightning bolt/chain lightning are the only ones I useQuote:
Originally Posted by Akumatv
Timers: Those you can look at in my Isboxer profile they should be under warlock->"Timed DPS (Boss)", but they're far from tested out yet. I have prioritised playing instead of setup post launch.
Vuhdo on alts: Same vuhdo setup as priest just different spell binds, but with smaller VFX source/viewers. Initially I was going to play x3 mages, so the FX names reflect that in the keymap "Video FX stuff".
TSM & Tbag: TSM has account link/sync in it already just need to type in names in the Account Syncing part of the settings, Tbag can only see the WoW accounts bags/banks, no clue if it could be configured to show all.
WA's: The weakauras are just a copy of the already posted one, only big difference is spell ids, party castbars also mentioned in thread.
Nope, haven't looked at it at all since installing it, I was going to use it for solo play though.Quote:
Originally Posted by Wizeowel
And yes, when I feel like I have the time for it i'll move to ElvUI, maybe use their party/raid frames for healing instead of grid, just don't feel like taking the time off from the grind yet.
I have also been using ElvUI for the longest time, and also had it installed at launch, however it constantly made lua errors so I dropped it.Quote:
Originally Posted by Apatheist
Thank you for the replies. I'll have a look at it all and see if I can figure it out :D
About TSM, I checked the software and cant find any setting about syncing. All ive got is a general tab, notifications, backup, and advanced with nothing but a button to upload app log. Am I totally missing something here?
Not sure what you've installed my tsm looks like this:https://imgur.com/a/xINzozGQuote:
Originally Posted by Akumatv
oh you sync it from the ingame addon. Thought you were talking about the desktop app. Thank you!
May I ask how you got the clickbars to work? I've created the bars itself, but I cant figure out how to set them up so that if I click one of the buttons, it will use something in a different window. The wiki doesnt explain it well enough for someone without prior experience. I jsut cant figure it out. I want to be able to click the bar on my main screen, and then it will use a skill in one of the other windows. EIther by keybind or mouseclick, whichever is better.
Not sure you can do keybinds, I'll post a img with my pro mspaint skills.Quote:
Originally Posted by Akumatv
https://i.imgur.com/e9p2xos.png
Step 1. you can Left click, shift-left click, do whatever you want with your mouse and it'll be over in the right side panel, then choose the Target/Action target group and what you want them to do, create a Key map with the ingame bind you want the click to send to the alts.
EDIT: What I've done is create a key map for drinking and have it Target=self in the Key map, then in the clickbar use the target you want to make drink
https://i.imgur.com/6DD872z.png
Been looking all over ElvUI for party cast bars. Would you mind pointing me in the right direction?Quote:
Originally Posted by Apatheist
Thank you so much for the help! Really appreciated! However, I still cant figure it out... I actually feel retarded with how much im struggling!Quote:
Originally Posted by Quiding
Would you mind showing me how you set up the mapped key aswell? No clue if thats the problem or not.
Edit: Saw the edit just now. Let me read it and see if I figure it out now. Will get back to you:) Cheers!
Still cant figure it out... I have no clue what im doing wrong. Sent you a PM so I wont spam this anymore than I already have ^^Quote:
Originally Posted by Quiding
I salute you for your willingness to help.Quote:
Originally Posted by Quiding
Seeing an advanced UI in action and having specific steps to recreate parts will likely help lots of folks.
Can you post your trade macro's for reagents/greys?
I am currently toying around with something like:
/run for i=0,4 do for x=1,GetContainerNumSlots(i) do y=GetContainerItemLink(i,x) if y then if GetItemInfo(y)=="Conjured Mana Cake" then PickupContainerItem(i,x); DropItemOnUnit("target"); return; end end end end
I am just adding everything I want traded to EMA Interaction->Trade and using a accept trade macroQuote:
Originally Posted by aiedz
/trade
/script AcceptTrade();
Only problem is trading conjured stuff will also cause the alts to trade stuff between eachother.