Printable View
Thx man. I'm sorry for spoling the thread but I figure I might as well ask.Quote:
Originally Posted by '-silencer-',index.php?page=Thread&postID=32602#post32602
Is it easy to clock? I'm guessing it's done in bios. Can I use the original cpu fan?
I'm gonna buy a motherboard with 4xram slots. And I'm gonna buy 4x1024mb ram(all the same manufacturer). Does this work without problem?
It's easy to overclock, but you want to be careful and watch temperatures/voltages or you can fry your cpu. There are guides to overclocking online, I suggest you google one on overclocking the Conroe Core2Duo cpus. You'll have to check the motherboard's manual to see if the ram is the right type for the board. Generally, you can use 4x 1GB sticks in a 4-slot motherboard. I have a Gigabyte P965-DS3 with 4x 1GB Corsair XMS DDR2-675 sticks and no problems.Quote:
Originally Posted by 'Fragmad',index.php?page=Thread&postID=32607#post3 2607
However, I would not attempt overclocking any CPU on the stock heatsink beyond 5-10%. The $40 Scythe Ninja (comes with decent fan) is all you need to get the Conroe from 2.4GHz to 3.2GHz safely. All chips do not have the exact same tolerances though, so you'd be safer to stick with a 2.8-3.0GHz goal. If you've never overclocked before, you'll probably want some help along the way.. it can get expensive if you don't know what you're doing.
The first chip I ever OC'd was my Commodore Amiga, I've OC'd everything since then from the Pentium on through my Athlon 64 4000+... but then I fried my mainboard, cpu and PSU on two machines figuring out WHAT I fried from a fucked up overclock. I KNEW what I was doing, I knew how to do it and how to safely do it, sooner or later you WILL burn shit out.Quote:
Originally Posted by '-silencer-',index.php?page=Thread&postID=32655#post32655
My mistake cost me $900 and thats using the Antec warranty to replace both 500W PSU's instead of buying new ones...
Heh, I remember the good ole C-64 and Apple 2 days.
Don't feel too bad about your setup. Computers like to act funny sometimes. I run my main character on an E6600, 4gb ram, 8800gt, and I still get lag and stuttering in big cities, pvp, etc. Compare that with my E6400, 2gb, radeon x850 economy card, which runs the other 4 wow's, and it has no lag or stuttering at all. Go figure.
First off, 32-bit OSs only support up to 3.2GB RAM (I could be WAY off, but this is what I understand). I would install a 64-bit OS.
Vista taking 1 GB Ram, and each WoW instance taking .5GB RAM, you are very close to running past what you've got with 5 instances running.
You should only have sound running on 1 copy (your Main's window).
Your drivers should be up to date and approved for Vista.
Lokked
Xp 32 shows 3.2gb ram for me. I had Vista installed before. WoW ran no better than it does now. The fps was actually a little less in Vista, latest drivers and all.
From what I've read the cheapest sound card that offers any form of hardware acceleration which will take strain off your cpu is the XtremeGamer it usually goes for $80ish but you can find it for $50 after rebate some times.
32 bit OS's support 4GB of memory addressing. However in order to access your hardware they have to allocate some of that memory space to those devices, as such out of the top end of 4GB you lose some of the accessible memory due to address limitations. The amount actually available can vary depending on hardware in the system. For example the backup server I maintain at work with 4GB of physical memory can only address 3.1gb of it due to having 4 raid controllers in it. While my home system is relatively simple in comparison and can address 3.5gb of ram.
Saddly, it appears that my CPU is certainly my chokepoint. So the next thing I get to do is buy a quad core processor and an intel board that has PCI Express 2.0 on it... that will make full utilization of the 8800GT and the quad core should have enough spare top end to do what I want... fairly short journey to a happy ending...
Hm, I read the description on the motherboard, what it said about ram was:Quote:
Originally Posted by '-silencer-',index.php?page=Thread&postID=32655#post32655
Supports 8 GB (max).
Ram-property: Not buffered, two ddr-channels.
Not buffered, is that a problem? ^^
95% of the standard desktop memory you'll find is unbuffered. Buffered memory was more common back in the PC66/PC100 days - typically higher-end server memory. With my board I could have gone with 4x2GB sticks.. but when I got my first pair, memory was 4x-5x the price it is now. Around late spring last year, memory prices took a dive. I believe there was some lawsuit on collusion for artificially keeping prices high, so that broke down that wall.Quote:
Originally Posted by 'Fragmad',index.php?page=Thread&postID=32708#post3 2708