Bit Rusty, need a little macro help.

Hi guys, bit rusty after a year with macros, doing pretty well except 2 things.

I'd like to cast Power word Shield then Flash heal, then continue to spam the key for flash heals until powerword shield is up, Got close but just can't figure it out yet.

EDIT:
Trying to setup 5 Macros for each member (by name), that way I can just press the icon to shield and flash heal spam it.

The other is, i've NEVER used focus macros before. What ever my targeted with my main is what I could shoot, so I'd have to stop and heal while the others aren't casting. I really need to change that! Hopfully this new focus stuff can help.

As of right now I have this macro setup on the warlocks.

/assist Ztox
/castsequence reset=combat Siphon Life, Curse of Agony, Corruption, Unstable Affliction, Immolate, Seed of Corruption

How could I change this so that I could target other things with my main and keep them casting? I'm completely lost atm XD

Focus was added so people could use it to keep track of a mob or player. It is a target frame. You can get an addon that shows it. I use FocusFrame from curse-gaming.com

I don't like to change targets, almost ever. I use macros to try to keep me from directly targeting or having to change targets. I focus my main. Meaning, on my alts, I use...
/focus [target=party1, nodead] [target=party2, nodead] [target=party3, nodead]
I don't go past 3, cause that pretty much is a wipe. Also, I can still target when my main is dead and the macros still work, so I almost never change my focus. So that gets my alts a person to cast on and uses focus-target to get a mob to kill.

For macros that use focus, I use
/cast [target=focus-target] DPSSpell for DPS
/cast [target=focus-target-target] HealSpell for healing

The alts never have to target anyone, they just cast on whoever the main is targeting. They don't have to know who has aggro, they just heal whoever the mob is hurting. That is mostly cause I don't have a designated tank on my hunters or my shammies. I hope they equally get aggro so it spreads the damage out. So I don't know when anyone might steal aggro, so I make a macro that doesn't care. It just heals whoever is getting hurt.

Now to your question. You can use castsequence to cast a sequence of spells. It has a lot of features, so you can either look them up or just ask here and most people can help describe them. One is reset, one is options and one is targeting.
First, reset. You can force a reset at a specific time by putting in dummy commands so the sequence ends when you want.
/castsequence reset=16 Power Word:Shield, Flash Heal, , , , , , , , , , , , , , , , , ,
If you spam that, you get a shield and then a heal and then nothing until 16 secs (picked for 15sec debuff of PW:S)
Can skip options, but some are combat, dead, exists, party/raid, channeling, flyable, mounted, equipped, etc.
The targeting helps like I described above.
For heal:
/castsequence [target=focus-target-target] reset=target/combat/16 Power Word:Shield, Flash Heal, Flash Heal, Flash Heal, Flash Heal, Flash Heal, , , ,
For DPS:
/castsequence [target=focus-target] reset=target/combat/20 Siphon Life, Curse of Agony, Corruption, Unstable Affliction, Immolate, Seed of Corruption, , , , , , ,
The target is so they start over on a new target, the 20 is so you can spam it in case you get excited and it doesn't try to start over, wasting DOTs.


Hope that helps.

Quote:

---

Originally Posted by 'Bradster',index.php?page=Thread&postID=85709#post 85709

How could I change this so that I could target other things with my main and keep them casting? I'm completely lost atm XD

---

Is this what you mean?

#showtooltip
/cast [exists,harm,nodead] fireball
/stopmacro [exists,harm,nodead]
/assist [target=focus, party][target=party1]
/cast fireball

Keeps the alts from changing target until its dead and allows the main to change targets to heal or taunt etc

Quote:

---

Originally Posted by 'Zuri',index.php?page=Thread&postID=85872#post8587 2

Quote:

---

Originally Posted by 'Bradster',index.php?page=Thread&postID=85709#post 85709

How could I change this so that I could target other things with my main and keep them casting? I'm completely lost atm XD

---

Is this what you mean?

#showtooltip
/cast [exists,harm,nodead] fireball
/stopmacro [exists,harm,nodead]
/assist [target=focus, party][target=party1]
/cast fireball

Keeps the alts from changing target until its dead and allows the main to change targets to heal or taunt etc

---

thanks guys, I'm at work now so I can't play around with it. Should it look like this?

/assist Ztox
/assist [target=focus, party][target=party1]
/castsequence reset=target Siphon Life, Curse of Agony, Corruption, Immolate, Unstable Affliction, Seed of Corruption

Quote:

---

Originally Posted by 'ElectronDF',index.php?page=Thread&postID=85727#po st85727

/castsequence [target=focus-target-target] reset=target/combat/16 Power Word:Shield, Flash Heal, Flash Heal, Flash Heal, Flash Heal, Flash Heal, , , ,
For DPS:
/castsequence [target=focus-target] reset=target/combat/20 Siphon Life, Curse of Agony, Corruption, Unstable Affliction, Immolate, Seed of Corruption, , , , , , ,

---

Reading is fundamental XD
Thanks for this!

Bit confused still on the healing one.
I'll have 1 2 3 4 5 icons, 1 heals and shields player A, 2 heals and shields player b etc.

So in that case can I make it like this?
Macro 1
/castsequence [target=Atox] reset=target/combat/16 Power Word:Shield, Flash Heal, Flash Heal, Flash Heal, Flash Heal

Macro 2
/castsequence [target=Btox] reset=target/combat/16 Power Word:Shield, Flash Heal, Flash Heal, Flash Heal, Flash Heal

and so on?

Hows this look for Seduce, any suggestions on any changes?

Atox Bound to key F9
/assist Ztox
/clearfocus [modifier:alt]
/focus [target=focus,noexists]; [target=focus,dead]
/clearfocus [target=focus,help]
/petstay
/petfollow
/cast [pet:succubus,target=focus,exists,harm] Seduction; Seduction

Btox Bound to key F10
/assist Ztox
#showtooltip
/clearfocus [modifier:alt]
/focus [target=focus,noexists]; [target=focus,dead]
/clearfocus [target=focus,help]
/petstay
/petfollow
/cast [pet:succubus,target=focus,exists,harm] Seduction; Seduction

Ctox Bound to key F11
/assist Ztox
#showtooltip
/clearfocus [modifier:alt]
/focus [target=focus,noexists]; [target=focus,dead]
/clearfocus [target=focus,help]
/petstay
/petfollow
/cast [pet:succubus,target=focus,exists,harm] Seduction; Seduction

Dtox Bound to key F12
/assist Ztox
#showtooltip
/clearfocus [modifier:alt]
/focus [target=focus,noexists]; [target=focus,dead]
/clearfocus [target=focus,help]
/petstay
/petfollow
/cast [pet:succubus,target=focus,exists,harm] Seduction; Seduction

Not 100% sure this will work and I'm at work so I can't test it but for the PWS and heals macro I think castrandom would work.

Code:

---

/castrandom Power Word:Shield
/cast Flash Heal

---

The macro should ignore the PWS while it is on cooldown and go straight to the heal.
Like I said, at work and can't test it but I use the same thing on my hunter for kill command (6 sec CD) in his shot rotation macro.

oooo I like this, Well eight hours left of work. So i'll let you know then, thanks ^^

Quote:

---

Originally Posted by 'Gaffy',index.php?page=Thread&postID=86100#post861 00

Not 100% sure this will work and I'm at work so I can't test it but for the PWS and heals macro I think castrandom would work.

Code:

---

/castrandom Power Word:Shield
/cast Flash Heal

---

The macro should ignore the PWS while it is on cooldown and go straight to the heal.
Like I said, at work and can't test it but I use the same thing on my hunter for kill command (6 sec CD) in his shot rotation macro.

---

Quote:

---

Originally Posted by 'Bradster',index.php?page=Thread&postID=86001#post 86001

Quote:

---

Originally Posted by 'ElectronDF',index.php?page=Thread&postID=85727#po st85727

/castsequence [target=focus-target-target] reset=target/combat/16 Power Word:Shield, Flash Heal, Flash Heal, Flash Heal, Flash Heal, Flash Heal, , , ,
For DPS:
/castsequence [target=focus-target] reset=target/combat/20 Siphon Life, Curse of Agony, Corruption, Unstable Affliction, Immolate, Seed of Corruption, , , , , , ,

---

Reading is fundamental XD
Thanks for this!

Bit confused still on the healing one.
I'll have 1 2 3 4 5 icons, 1 heals and shields player A, 2 heals and shields player b etc.

So in that case can I make it like this?
Macro 1
/castsequence [target=Atox] reset=target/combat/16 Power Word:Shield, Flash Heal, Flash Heal, Flash Heal, Flash Heal

Macro 2
/castsequence [target=Btox] reset=target/combat/16 Power Word:Shield, Flash Heal, Flash Heal, Flash Heal, Flash Heal

and so on?

---

Guess I accidently got an emote out of that, sorry, it was supposed to be a colon followed by a capital S.
Yeah, that would work. You don't need the target on the reset, since it will always be the same target. It doesn't hurt anything though.

Just my 2cents again, see how the heal macro doesn't make you target anyone? You could have a zombie targeted and it still heals the right person. My idea for DPS is the same, just put in targets in your casts and you never have to change targets. You never have to worry about if you got the assists correct, etc.
/cast [target=focus-target] DPSSPell
The same works for healing, you might never have to individually target a heal. I just heal whoever has aggro, so it becomes:
/cast [target=focus-target-target] HealSpell
It says, look at the main (focus) and then look at his mob (focus-target). Whoever that mob is beating on (focus-target-target) gets a heal.

OK, I was a bit off. You need

Code:

---

/castrandom Power Word:Shield,
 /cast Flash Heal

---

Make sure you put the comma after PWS. That way when PWS is on CD, it will automatically choose the " " after the comma which does nothing and goes to the next line in the macro.
The downside to this method is that sometimes it will choose the blank instead of the spell and move to the next line. I guess you could minimize this by using

Code:

---

/castrandom Power Word:Shield, Power Word:Shield, Power Word:Shield, Power Word:Shield,
 /cast Flash Heal

---

up to the 255 char limit.