Successfully 5 Boxing - 1 PC, X2 6000+, 4GB Ram, 8800GT

Ok, so I finally got the fine tuning done, I finally tweaked and prodded and got it working sufficient to my desires!

The same graphics settings I normally play on the main client, 1680x1050, the other clients @ 16x9 ratios but split up onto a 1280x1024 monitor (they squish in the small windows, but look normal in when I PIP them to focus using keyclone...) To accomplish this I exploit a bug in KeyClone... I have 9 regions setup, 4 on my primary monitor overlaying the 1680x1050 region I play in... I have the 4 clones setup to load in those, I also have 4 other regions setup on the 1280x1024 monitor, each @ 640x512... when I click setup on keyclone then apply, the 4 smaller 16x9 windows move to the 2nd monitor and rescale to 4:3 with distortion...

These 4 clones are setup with no sounds.

All 5 commands are set to 10fpsbk and 28fps, I'll probably tweak with this til I get it to it's max...

But I can run around Shattrah without latency issues and my ventrilo works. A quad core is still on my wishlist, and that will put me able to run a viable pvp setup.

ok... what's the bug?

btw, you should uncheck the 'snap to grid' and that should keep the regions the dimensions you set

Code:

---

[regions]
count=9
region_name_00='region1'
region_00=1,0,0,1679,1049,0,0
region_pip_00=0,(45.8.8)
region_name_01='pip1'
region_01=1,0,0,639,511,1,0
region_pip_01=0,(36.8.8)
region_name_02='pip2'
region_02=1,640,0,1279,511,1,0
region_pip_02=0,(33.8.8)
region_name_03='pip3'
region_03=1,0,512,639,1023,1,0
region_pip_03=0,(35.8.8)
region_name_04='pip4'
region_04=1,640,512,1279,1023,1,0
region_pip_04=0,(34.8.8)
region_name_05='pip01'
region_05=1,0,0,839,524,0,0
region_pip_05=0,(36.4.4)
region_name_06='pip02'
region_06=1,840,0,1679,524,0,0
region_pip_06=0,(33.4.4)
region_name_07='pip03'
region_07=1,0,525,839,1049,0,0
region_pip_07=0,(35.4.4)
region_name_08='pip04'
region_08=1,840,525,1679,1049,0,0
region_pip_08=0,(34.4.4)

---

There's my regions...

I have 5 commands setup, the main loads to region1, the other 4 load to pip01-pip04. These 4 regions are all set on the primary display, at 16x9 ratios.

I open keyclones setup, I press apply. clients 2-5 MOVE (like PIP hotkeys were pressed) to regions pip1-pip5. pip1-pip5 are setup as 4:3 ratio zones on the secondary display.

I actually LIKE this functionality because when I PIP them to my main screen, the window looks normal, and while they are a bit squished sideways when they are small, it's not so drastic that I can't see whats going on.

So, in images... I load 5 copies as described and it looks like this:
http://www.botbh.com/images/step1.jpg
Please note, the 5th client is behind the 4 on the right side...

Then I open keyclones settings and simply click apply...
http://www.botbh.com/images/step2.jpg
And it moves clients 2-4 to the left screen, scrunches them to 4:3 and everything works as intended past that point.

Having an option to load WoW @ xxx resolution into region yyy would be great, I doubt most would use it, but I would :).

Obviously on vista :).