Printable View
I have a Radeon 5970 dual-gpu card and are wondering if its possible to utilize both gpu's when multiboxing. My first gpu is running at 100% usage under even light load so offloading it should increase performance a fair bit.
Crossfire is hard-coded into these cards so it can not be disabled, what Im looking for is someone that owns a 5970 card and have gotten multi-gpu to work with WoW :)
ISboxer. I did it with two 9800GX2s.
Pycno's issue is that the drivers and/or hardware configuration as shipped will not allow usage of the second GPU except in crossfire mode. ISBoxer lets you pick the monitor, which the video card and its drivers then determine how to power it (which GPU etc). With the 5970, Pycno is observing that the video card powers all of the outputs with the first GPU.
This is apparently configured by the BIOS on the card. The 5970 has two separate BIOS, one master and one slave. In this configuration it is not possible to disable Crossfire, but you can disable Catalyst AI and it will only use the first GPU. Someone on a completely unrelated forum discovered that by flashing the master BIOS on both, it operated the GPUs independently. I believe this is the only way of doing so. Pycno is concerned that flashing the master BIOS on both isn't necessarily safe (and there's no way of knowing either way).
So... I think he's looking for outside the box solutions, specific to the 5970, and he is indeed using ISBoxer :)
Correct :)
It would be nice to use both gpu's since I have two anyway but Im no longer looking actively for a solution to this after I removed a bad HDR-gfx patch and have very good performance now even with just one gpu.