BRD Emperor run long video warrior-priest-shaman-mage-lock

[Quiding]

Recorded a BRD run with bosses up to emperor aswell since I still need a few items from them, so total it took 55 minutes, maybe I could do it faster but after the demoralizing shout change AoE is quite alot harder.



https://www.youtube.com/watch?v=RzAl6fedtME

[rleur]

Nice video. That team comp works well together. Thanks for sharing.

[Acidburning]

thanks for sharing.

I really like your group display.
What addons are you using?
How do you get the boxes next to and above? And able to click them? Is that through Video FX?

[Quiding]

thanks for sharing.

I really like your group display.
What addons are you using?
How do you get the boxes next to and above? And able to click them? Is that through Video FX?

Im currently using Vuhdo + VFX for the group display, the small display with the same colors are for buffing/decursing are also vuhdo.
I think I will move to Grid2 soon though, the setup in Vuhdo is so confusing and the buffing isn't working 100%, i can't get it to recognize Arcane Brilliance/Prayer of Spirit and Fortitude.

The boxes next to is clickbars with weakauras on each character show through VFX.
Addons: Vuhdo, details, Lorti UI, Kui_Nameplates, EMA, Prat, ClassicCastbar.
TradeSkillMaster with account sync to see what I have on the others, Tbag to be able to browse through bank/other character on the same account.

[Fuzzyboy]

Very nice video - thanks for sharing. What are your thoughts on shaman vs another mage or lock in your setup? I'm running war/pri/2xmage/lock and considering swapping one mage for a shaman for the utility.

[Quiding]

I like totems alot, the levelling experience suffered quite alot by not having the extra AoE though, the shaman isn't lacking far behind now at 60 even with me doing quite alot of AoE.
Shaman was huge benefit in UBRS aswell with Beast's AoE fear.'
I think the difference in DPS can be explained by having to drop totems every other pack aswell.

Baron rivendare:
https://www.dual-boxing.com/attachment.php?attachmentid=2221&stc=1

Overall:

https://www.dual-boxing.com/attachment.php?attachmentid=2222&stc=1

[Hksix]

Im currently using Vuhdo + VFX for the group display, the small display with the same colors are for buffing/decursing are also vuhdo.
I think I will move to Grid2 soon though, the setup in Vuhdo is so confusing and the buffing isn't working 100%, i can't get it to recognize Arcane Brilliance/Prayer of Spirit and Fortitude.

The boxes next to is clickbars with weakauras on each character show through VFX.
Addons: Vuhdo, details, Lorti UI, Kui_Nameplates, EMA, Prat, ClassicCastbar.
TradeSkillMaster with account sync to see what I have on the others, Tbag to be able to browse through bank/other character on the same account.

This is amazing info, thank you! I will refer to this when I do a full revamp of my setup in the near future

[Imposibil]

how are you tracking totems timer ? have try'd with WA but cant make it to work (cant track party totems:( )

[Mercbeast]

how are you tracking totems timer ? have try'd with WA but cant make it to work (cant track party totems:( )

Check out the weakaura I posted, it probably can be used to display party totems. You'd need to rejig it, but I don't see why it wouldn't work.

[Imposibil]

Check out the weakaura I posted, it probably can be used to display party totems. You'd need to rejig it, but I don't see why it wouldn't work.

Uhm, can you point me to it please ?
Also , all this time i have only been using TMW so WA is a bit "clunky" to me, i would appreciate if you also point to what changes i need to make (if is the case).
Thanks

[Quiding]

Uhm, can you point me to it please ?
Also , all this time i have only been using TMW so WA is a bit "clunky" to me, i would appreciate if you also point to what changes i need to make (if is the case).
Thanks

This is my WA totem: https://pastebin.com/ezLsNGb4
The vfx I use for it: https://i.imgur.com/dXs9YWE.png (https://i.imgur.com/dXs9YWE.png?1)
Clickbars on top of it to use them manually when I need to move them, like in BRD with the respawning mobs before second last boss.

[Imposibil]

oh so you are tracking the totems timer with a VFX ...
ok that was the big question , i already have clickbars set for each totem i need, i was only interested in the tracking thing, i tought you are tracking them directly from the warrior ...
thanks anyway

[Celosar]

When I watch videos like this I end up spending like 4 hours trying to make my setup half as good then giving up and being very sad. I'd probably be willing to send someone actual money for a really in depth vid of how to setup ISBoxer with the addons to make something that functional looking.

I've enjoyed boxing since 06 but I know fuckall about the 129834576 drop downs in ISBoxer. Shit makes me miss macros and keyclone. I feel like you need a software engineering degree to understand even the "tutorial" stuff.

[nodoze]

When I watch videos like this I end up spending like 4 hours trying to make my setup half as good then giving up and being very sad. I'd probably be willing to send someone actual money for a really in depth vid of how to setup ISBoxer with the addons to make something that functional looking.

I've enjoyed boxing since 06 but I know fuckall about the 129834576 drop downs in ISBoxer. Shit makes me miss macros and keyclone. I feel like you need a software engineering degree to understand even the "tutorial" stuff.Have you watched Dalo's videos? He does some real short and simple ones on various topics.

[Zal]

Very nice video and extremely impressive setup. I definitely have a lot of work to do in the future with my setup after seeing yours.

[Akumatv]

The boxes next to is clickbars with weakauras on each character show through VFX.


Insane looking video. WOuld you mind sharing those WA's with me? I am currently in the process of getting my setup ready to start multiboxing again for classic. Used multiboxing to get realm first level 90 monk when MoP was released, but havent touched it since due to school etc.

Thank you:)

Edit: And also the clickbars you mentioned yesterday. That would be great. "Clickbars on top of it to use them manually when I need to move them, like in BRD with the respawning mobs before second last boss."

[Quiding]

Insane looking video. WOuld you mind sharing those WA's with me? I am currently in the process of getting my setup ready to start multiboxing again for classic. Used multiboxing to get realm first level 90 monk when MoP was released, but havent touched it since due to school etc.

Thank you:)

Edit: And also the clickbars you mentioned yesterday. That would be great. "Clickbars on top of it to use them manually when I need to move them, like in BRD with the respawning mobs before second last boss."


The 4 WA's I use on the alts are very similiar, just different spell ids or item count on shards.
This is the warlocks: https://pastebin.com/nPJ5RV6n

No idea how you use/copy paste the clickbars but here they are
WA Clickbar: https://pastebin.com/xwZjB8z6
Totems: https://pastebin.com/psnLYcxL

[Akumatv]

One more favor if you would be so kind, could you export the vuhdo settings aswell? Yours looks perfect imo, the settings for each char I wont have a problem setting up once I get to a certain level and get the required spells.

Thank you for all the help so far! Really appreciated!

[dalo199]

Awesome video mate very impressive! Cant wait to start doing BRD myself

I am going to link your vid in my youtube channel as well

How quickly do the shammy and lock go oom compared to the mage?

[Morehei]

Recorded a BRD run with bosses up to emperor aswell since I still need a few items from them, so total it took 55 minutes, maybe I could do it faster but after the demoralizing shout change AoE is quite alot harder.


Thats an awesome setup.
Do you think you could share your ISB profile please ?

[Quiding]

One more favor if you would be so kind, could you export the vuhdo settings aswell? Yours looks perfect imo, the settings for each char I wont have a problem setting up once I get to a certain level and get the required spells.

Thank you for all the help so far! Really appreciated!
vuhdo from priest: https://pastebin.com/mgZU1W4w
Still havent figured out 40man setup.


Awesome video mate very impressive! Cant wait to start doing BRD myself

I am going to link your vid in my youtube channel as well

How quickly do the shammy and lock go oom compared to the mage?
Depends on the fight, on AoE lock and mage go oom at same time since im not AoE specced on warlock anymore, so any hits pretty much interrupts hellfire.
Single target I would say when shaman goes oom mage is still +50% same with lock, on lock I used life tap in the rotation now.


Thats an awesome setup.
Do you think you could share your ISB profile please ?
I started this profile kinda copying SerScruffington's BFA setup, it might be a bit messy.
https://pastebin.com/raEVYLQP
Quiding = Warrior, Quidingab = Priest, Quidingac = Shaman, Quidingad = Mage, Quidingae = warlock

[Carto]

Your setup is amazing, thank you so much for sharing! For your DPS casters do you have it setup where one button is single target and fires off a frostbolt/shadow bolt/lightning bolt? And one button is DPS where it fires off nova/hellfire/chain lightning? How are you balancing in the warlock dots that I see periodically? Is there some sort of cast sequence for that?

When I get home from work tonight I am going to play around with replicating this. I currently am trying a warr/priest/mage/mage/lock setup. I leveled my priest to 60 with some friends so the boxing is my project when not doing guild stuff.

Thanks again!

[Quiding]

Your setup is amazing, thank you so much for sharing! For your DPS casters do you have it setup where one button is single target and fires off a frostbolt/shadow bolt/lightning bolt? And one button is DPS where it fires off nova/hellfire/chain lightning? How are you balancing in the warlock dots that I see periodically? Is there some sort of cast sequence for that?

When I get home from work tonight I am going to play around with replicating this. I currently am trying a warr/priest/mage/mage/lock setup. I leveled my priest to 60 with some friends so the boxing is my project when not doing guild stuff.

Thanks again!

/castsequence [nochanneling]reset=target/15 Corruption, null
/castsequence [nochanneling]reset=combat Shadow Bolt, Shadow Bolt, Shadow Bolt,Shadow Bolt, Life Tap, Shadow Bolt,Shadow Bolt, Life tap
Is the trash macro for lock, seems to work OK.

For boss I have separate key runs it without corruption and then use timers in ISboxer and Curse of shadow aswell

And yes separate key for AoE

[tjuren]

Impressive video.

I must ask, how did you get "party cast bars", I cant find any addon for it :-/

[Akumatv]

coming home tired as hell from being on the road from 05 until now (22) I suddenly feel the urge to stay up and configure my setup after reading the new posts on your thread. Like a lot of people has said already, crazy good setup.

I see people asking a lot of questions I havent even thought about. Any chance you might be able to go a bit into detail about your setup? macros, the timers you're talking about in ISboxer, the extra bars that you say is set up with vuhdo for decursing, how you're using tsm and tbag to see all the chars on one char, link to all your WAs for each char (yes I understand that little about that kind of stuff xD) next to the VuhDo, etc etc. Would be really appreciated as I have no clue where to start with this. All i've used in the past is keyclone. This is WAY more complex from the looks of it.

[nodoze]

This is very impressive.

Both clean and effective UI and though lots of different classes it is still pretty much a standard Tank+Healer+3 ranged DPS setup (Mage+Warlock+Shaman).

I am only at 33 minutes so far but plan to finish.

Thanks for sharing video and even more importantly details on your setup. I will likely download & study the files as well.

Great job!

[Wizeowel]

Quiding nice video and UI set up :cool:

You mention switching to Grid2, that's what I used in Retail but atm in Classic I'm just going with the blizz raid frames because they aren't so bad really.

I have the player, target and the swing timers centrally, similar to you, but find I don't care about swing timer much when boxing. Does it become critical at level 50+?


I must ask, how did you get "party cast bars", I cant find any addon for it :-/

Looks like a weakaura. Just press New -> Progress bar -> change trigger type to Status -> choose Casting from the drop-down -> select the unit to be party1. Finally duplicate it 3 times for party2/party3/party4.

[tjuren]

Thanks a ton, got castbars working =)


Quiding nice video and UI set up :cool:

You mention switching to Grid2, that's what I used in Retail but atm in Classic I'm just going with the blizz raid frames because they aren't so bad really.

I have the player, target and the swing timers centrally, similar to you, but find I don't care about swing timer much when boxing. Does it become critical at level 50+?



Looks like a weakaura. Just press New -> Progress bar -> change trigger type to Status -> choose Casting from the drop-down -> select the unit to be party1. Finally duplicate it 3 times for party2/party3/party4.

[Apatheist]

Thanks a ton, got castbars working =)

ElvUI has the option to enable party cast bars, sort party/raid alphabetically, pixel perfect grid configuration for all frames, loot filtering, customizable buff/debuff white/blacklist and you can create profiles to conveniently export/import your entire UI setup between teams.

I don't understand why everybody isn't using. It's been on my essential addon list for boxing since Wrath.

[Quiding]

Looks like a weakaura. Just press New -> Progress bar -> change trigger type to Status -> choose Casting from the drop-down -> select the unit to be party1. Finally duplicate it 3 times for party2/party3/party4.
This is how I did it but with character names instead of party2 because of UBRS runs with randoms, it will also be a problem in raids.
The trigger doesn't seem to work correctly though, I read somewhere they wanted the castbars to have a vanilla feel to it, maybe the problem is in the client? I don't know.


coming home tired as hell from being on the road from 05 until now (22) I suddenly feel the urge to stay up and configure my setup after reading the new posts on your thread. Like a lot of people has said already, crazy good setup.

I see people asking a lot of questions I havent even thought about. Any chance you might be able to go a bit into detail about your setup? macros, the timers you're talking about in ISboxer, the extra bars that you say is set up with vuhdo for decursing, how you're using tsm and tbag to see all the chars on one char, link to all your WAs for each char (yes I understand that little about that kind of stuff xD) next to the VuhDo, etc etc. Would be really appreciated as I have no clue where to start with this. All i've used in the past is keyclone. This is WAY more complex from the looks of it.
Macros: The macro already posted in the thread for warlock and shaman lightning bolt/chain lightning are the only ones I use

Timers: Those you can look at in my Isboxer profile they should be under warlock->"Timed DPS (Boss)", but they're far from tested out yet. I have prioritised playing instead of setup post launch.

Vuhdo on alts: Same vuhdo setup as priest just different spell binds, but with smaller VFX source/viewers. Initially I was going to play x3 mages, so the FX names reflect that in the keymap "Video FX stuff".

TSM & Tbag: TSM has account link/sync in it already just need to type in names in the Account Syncing part of the settings, Tbag can only see the WoW accounts bags/banks, no clue if it could be configured to show all.

WA's: The weakauras are just a copy of the already posted one, only big difference is spell ids, party castbars also mentioned in thread.




I have the player, target and the swing timers centrally, similar to you, but find I don't care about swing timer much when boxing. Does it become critical at level 50+?
Nope, haven't looked at it at all since installing it, I was going to use it for solo play though.
And yes, when I feel like I have the time for it i'll move to ElvUI, maybe use their party/raid frames for healing instead of grid, just don't feel like taking the time off from the grind yet.

[Quiding]

ElvUI has the option to enable party cast bars, sort party/raid alphabetically, pixel perfect grid configuration for all frames, loot filtering, customizable buff/debuff white/blacklist and you can create profiles to conveniently export/import your entire UI setup between teams.

I don't understand why everybody isn't using. It's been on my essential addon list for boxing since Wrath.

I have also been using ElvUI for the longest time, and also had it installed at launch, however it constantly made lua errors so I dropped it.

[Akumatv]

Thank you for the replies. I'll have a look at it all and see if I can figure it out :D

About TSM, I checked the software and cant find any setting about syncing. All ive got is a general tab, notifications, backup, and advanced with nothing but a button to upload app log. Am I totally missing something here?

[Quiding]

Thank you for the replies. I'll have a look at it all and see if I can figure it out :D

About TSM, I checked the software and cant find any setting about syncing. All ive got is a general tab, notifications, backup, and advanced with nothing but a button to upload app log. Am I totally missing something here?
Not sure what you've installed my tsm looks like this:https://imgur.com/a/xINzozG

[Akumatv]

oh you sync it from the ingame addon. Thought you were talking about the desktop app. Thank you!

May I ask how you got the clickbars to work? I've created the bars itself, but I cant figure out how to set them up so that if I click one of the buttons, it will use something in a different window. The wiki doesnt explain it well enough for someone without prior experience. I jsut cant figure it out. I want to be able to click the bar on my main screen, and then it will use a skill in one of the other windows. EIther by keybind or mouseclick, whichever is better.

[Quiding]

May I ask how you got the clickbars to work? I've created the bars itself, but I cant figure out how to set them up so that if I click one of the buttons, it will use something in a different window. The wiki doesnt explain it well enough for someone without prior experience. I jsut cant figure it out. I want to be able to click the bar on my main screen, and then it will use a skill in one of the other windows. EIther by keybind or mouseclick, whichever is better.
Not sure you can do keybinds, I'll post a img with my pro mspaint skills.
https://i.imgur.com/e9p2xos.png

Step 1. you can Left click, shift-left click, do whatever you want with your mouse and it'll be over in the right side panel, then choose the Target/Action target group and what you want them to do, create a Key map with the ingame bind you want the click to send to the alts.

EDIT: What I've done is create a key map for drinking and have it Target=self in the Key map, then in the clickbar use the target you want to make drink
https://i.imgur.com/6DD872z.png

[Battleshrimp]

ElvUI has the option to enable party cast bars

Been looking all over ElvUI for party cast bars. Would you mind pointing me in the right direction?

[Akumatv]

Not sure you can do keybinds, I'll post a img with my pro mspaint skills.
https://i.imgur.com/e9p2xos.png

Step 1. you can Left click, shift-left click, do whatever you want with your mouse and it'll be over in the right side panel, then choose the Target/Action target group and what you want them to do, create a Key map with the ingame bind you want the click to send to the alts.

EDIT: What I've done is create a key map for drinking and have it Target=self in the Key map, then in the clickbar use the target you want to make drink
https://i.imgur.com/6DD872z.png

Thank you so much for the help! Really appreciated! However, I still cant figure it out... I actually feel retarded with how much im struggling!
Would you mind showing me how you set up the mapped key aswell? No clue if thats the problem or not.

Edit: Saw the edit just now. Let me read it and see if I figure it out now. Will get back to you:) Cheers!


Not sure you can do keybinds, I'll post a img with my pro mspaint skills.
https://i.imgur.com/e9p2xos.png

Step 1. you can Left click, shift-left click, do whatever you want with your mouse and it'll be over in the right side panel, then choose the Target/Action target group and what you want them to do, create a Key map with the ingame bind you want the click to send to the alts.

EDIT: What I've done is create a key map for drinking and have it Target=self in the Key map, then in the clickbar use the target you want to make drink
https://i.imgur.com/6DD872z.png

Still cant figure it out... I have no clue what im doing wrong. Sent you a PM so I wont spam this anymore than I already have ^^

[nodoze]

Not sure you can do keybinds, I'll post a img with my pro mspaint skills. ...
Step 1. ...
EDIT: What I've done is create a key map for drinking and ... I salute you for your willingness to help.

Seeing an advanced UI in action and having specific steps to recreate parts will likely help lots of folks.

[aiedz]

Can you post your trade macro's for reagents/greys?

I am currently toying around with something like:


/run for i=0,4 do for x=1,GetContainerNumSlots(i) do y=GetContainerItemLink(i,x) if y then if GetItemInfo(y)=="Conjured Mana Cake" then PickupContainerItem(i,x); DropItemOnUnit("target"); return; end end end end

[Quiding]

Can you post your trade macro's for reagents/greys?

I am currently toying around with something like:


/run for i=0,4 do for x=1,GetContainerNumSlots(i) do y=GetContainerItemLink(i,x) if y then if GetItemInfo(y)=="Conjured Mana Cake" then PickupContainerItem(i,x); DropItemOnUnit("target"); return; end end end end

I am just adding everything I want traded to EMA Interaction->Trade and using a accept trade macro
/trade
/script AcceptTrade();

Only problem is trading conjured stuff will also cause the alts to trade stuff between eachother.

[Celosar]

ElvUI has the option to enable party cast bars, sort party/raid alphabetically, pixel perfect grid configuration for all frames, loot filtering, customizable buff/debuff white/blacklist and you can create profiles to conveniently export/import your entire UI setup between teams.

I don't understand why everybody isn't using. It's been on my essential addon list for boxing since Wrath.



I've been trying to find a way to show party cast bars in ElvUI for like 8 hours today? where do you enable this?????

[nodoze]

I've been trying to find a way to show party cast bars in ElvUI for like 8 hours today? where do you enable this?????After reading this thread I spent a ton of hours on ElvUI but then when I went into SM I kept getting LUA errors and had to disable it. Kinda sucks as I worked a lot on the look/feel and was really happy with it until I tried to run a dungeon...

Are you running ISboxer wtih ElvUI with no issues?

[Quiding]

I've been trying to find a way to show party cast bars in ElvUI for like 8 hours today? where do you enable this?????
https://www.reddit.com/r/WowUI/comments/d6eq8k/helpui_classic_elv_ui_since_patch_108_party/

[Battleshrimp]

https://www.reddit.com/r/WowUI/comments/d6eq8k/helpui_classic_elv_ui_since_patch_108_party/

Worked like a charm! Thank you Quiding.

[Battleshrimp]

After reading this thread I spent a ton of hours on ElvUI but then when I went into SM I kept getting LUA errors and had to disable it. Kinda sucks as I worked a lot on the look/feel and was really happy with it until I tried to run a dungeon...

Are you running ISboxer wtih ElvUI with no issues?

I have zero issues with ElvUi Classic and ISboxer. What kind of LUA-errors are you getting?

[Quiding]

This is without a doubt the worst dungeon so far, I hope to get done with it soon.

https://www.youtube.com/watch?v=pHeTc-Hv5PY

[Fuzzyboy]

Great video - thanks for posting!

What makes strath undead the worst dungeon you've done?

[Celosar]

After reading this thread I spent a ton of hours on ElvUI but then when I went into SM I kept getting LUA errors and had to disable it. Kinda sucks as I worked a lot on the look/feel and was really happy with it until I tried to run a dungeon...

Are you running ISboxer wtih ElvUI with no issues?

Yes. I downloaded it a day or two ago after someone posted it. I had forgotten it existed but used to be an avid user. I ran a mixed class party back in TBC/WotLK and they all had different cast times so the bars were mandatory. I've been running it for maybe 12 hours with no errors. It did cause a problem with Enchantrix but that was only on because I forgot to select a specific toon when I was addon editing.

[Quiding]

Great video - thanks for posting!

What makes strath undead the worst dungeon you've done?
Some crypt mobs you can't really LoS they shoot around corners, constant silences from various mobs and bosses, rammstein pretty much one shots my clothies, overall just a long dungeon for 2 drops I need at the end :(

[Celosar]

https://www.reddit.com/r/WowUI/comments/d6eq8k/helpui_classic_elv_ui_since_patch_108_party/

Thank you for this. I don't think I've edited a game document since I tried cheating at Baldur's Gate back in 96 but I got it figured out.

*tips hat*

[nodoze]

I have zero issues with ElvUi Classic and ISboxer. What kind of LUA-errors are you getting?I will try to get some time to recreate the ElvUi issues though right now what little game time I do have has actually been focused on learning/optimizing other addons that weren't thowing me errors.

On my personal PC I had to take a break to fix a few things as I was getting tight on CPU due to stupid WowVoiceProxy.exe and a little tight on RAM due to FireFox using ~80GB RAM so I am taking a break to categorize research related bookmarks and what not...

Unfortunately I am also working a lot this weekend so spending more time on my work PC and having to keep switching back and forth...

[Quiding]

Worked like a charm! Thank you Quiding.
Have you played around with the party castbars?
I just installed elvui again, and the castbars for the party has almost 0 options, can't move it inside the bar, can't move it through X,Y its useless as is for VFX if you don't want gaps.

EDIT: Added the information panel, that seems to soak up the castbar, adds some extra height to the bars though.

[Celosar]

Have you played around with the party castbars?
I just installed elvui again, and the castbars for the party has almost 0 options, can't move it inside the bar, can't move it through X,Y its useless as is for VFX if you don't want gaps.

EDIT: Added the information panel, that seems to soak up the castbar, adds some extra height to the bars though.

I just added the ElvUI castbars that someone linked earlier in this thread and they work fine. They show on the party window though and I don't think you can move them. If you're going for a centralized look/feel like you have now I wouldn't mess with it unless you move the party window to the middle as well.

[Quiding]

I just added the ElvUI castbars that someone linked earlier in this thread and they work fine. They show on the party window though and I don't think you can move them. If you're going for a centralized look/feel like you have now I wouldn't mess with it unless you move the party window to the middle as well.
Same with WA party castbars, they only seem to work some of the time, not sure what is wrong.
Almost finished with the UI now I think: https://i.imgur.com/DmatsFd.png
Trying to use repeater regions instead of VFX for the healing see how that goes.
debuffs & buffing done through filters in ElvUI, not at all sure how this works yet.

[Celosar]

Same with WA party castbars, they only seem to work some of the time, not sure what is wrong.
Almost finished with the UI now I think: https://i.imgur.com/DmatsFd.png
Trying to use repeater regions instead of VFX for the healing see how that goes.
debuffs & buffing done through filters in ElvUI, not at all sure how this works yet.

I watched the whole thing last night and have decided that I'd basically like to just copy your interface file, lol. I use repeater region for healing and it works fairly well. Sometimes I get a weird bug(?) where I click a heal while violently mashing my DPS buttons and maybe drag the mouse cursor(not sure) and I'm suddenly broadcasting. I tried the to setup a WA for their cast bars but they never showed up when casting so clearly my trigger or some such is wrong. ElvUI is fine with me though. I just increased the frame spacing and moved the party window closer to center.

[nodoze]

Same with WA party castbars, they only seem to work some of the time, not sure what is wrong.
Almost finished with the UI now I think: https://i.imgur.com/DmatsFd.png
Trying to use repeater regions instead of VFX for the healing see how that goes.
debuffs & buffing done through filters in ElvUI, not at all sure how this works yet.Do you know what changes you made to get your LUA errors to stop when using ElvUI?

[Quiding]

Do you know what changes you made to get your LUA errors to stop when using ElvUI?
Just did a fresh install and didn't use a premade profile from wago.io, just made it from default.


I watched the whole thing last night and have decided that I'd basically like to just copy your interface file, lol. I use repeater region for healing and it works fairly well. Sometimes I get a weird bug(?) where I click a heal while violently mashing my DPS buttons and maybe drag the mouse cursor(not sure) and I'm suddenly broadcasting. I tried the to setup a WA for their cast bars but they never showed up when casting so clearly my trigger or some such is wrong. ElvUI is fine with me though. I just increased the frame spacing and moved the party window closer to center.
I have same problem with VFX if I move cursor over it sometimes without meaning to the healer will do some random stuff.

[Apatheist]

Some crypt mobs you can't really LoS they shoot around corners, constant silences from various mobs and bosses, rammstein pretty much one shots my clothies, overall just a long dungeon for 2 drops I need at the end :(

Tried Scholomance yet? There are several mobs there with AE silence, AE knockback/shadow damage and the bosses are all a fair bit harder than Stratholme.

Scholo is easily my worst but I knew it would be going in.

[Quiding]

Tried Scholomance yet? There are several mobs there with AE silence, AE knockback/shadow damage and the bosses are all a fair bit harder than Stratholme.

Scholo is easily my worst but I knew it would be going in.

Haven't touched it yet because I also remember it from vanilla, I've only focused on getting bis gear for fury warrior and there is only one item in there that is semi good for him.

[aiedz]

If you get a chance can you export your elvUI settings and your window layout from ISBoxer?

[Quiding]

If you get a chance can you export your elvUI settings and your window layout from ISBoxer?
Elvui: https://pastebin.com/LLedRhnA

Window layout is just x5 stacked on one screen currently, the right game windows you see is video FX

[omnimultum]

Nice run matey

[Verenya5454]

Hi Quiding,

first please excuse my bad english. Iam a German Girl :)
I saw your video and there is one thing i would like to now and i want u to ask if u can explain this to me or do a profile which i can use.
I want a clickbar for my 5 MB Group for drinking water.
Like you got it in the video.

Can u explain this to me how i can set this up ?
Would be awesome.

[Quiding]

Hi Quiding,

first please excuse my bad english. Iam a German Girl :)
I saw your video and there is one thing i would like to now and i want u to ask if u can explain this to me or do a profile which i can use.
I want a clickbar for my 5 MB Group for drinking water.
Like you got it in the video.

Can u explain this to me how i can set this up ?
Would be awesome.
This link at the bottom has the clickbars in it: https://www.dual-boxing.com/threads/56167-BRD-Emperor-run-long-video-warrior-priest-shaman-mage-lock?p=423365&viewfull=1#post423365

But you want a keymap that press 0 ingame for example put the mana drink on that, then in the clickbar you tell it to use Target -> Name1 or Character slot 1 and then on.
You do this on all the clickbars so when you click one it only uses it on that one.
Posted earlier in thread is my Mspaint skill put to good use: https://i.imgur.com/e9p2xos.png

[Verenya5454]

This link at the bottom has the clickbars in it: https://www.dual-boxing.com/threads/56167-BRD-Emperor-run-long-video-warrior-priest-shaman-mage-lock?p=423365&viewfull=1#post423365

But you want a keymap that press 0 ingame for example put the mana drink on that, then in the clickbar you tell it to use Target -> Name1 or Character slot 1 and then on.
You do this on all the clickbars so when you click one it only uses it on that one.
Posted earlier in thread is my Mspaint skill put to good use: https://i.imgur.com/e9p2xos.png


I just need a guide from step 1.
How to setup a clickbar.
Is there a way you can do this with pictures?
Like u did in paint.

Because i have no idea how to set the keymaps,and so on.
I am totally new into isboxer...

And the guides doesnt help me because i need it with pictures or youtube video because i dont understand so many words in english.
I know this is a lot to ask...
But it would be so nice of you...

[Quiding]

I just need a guide from step 1.
How to setup a clickbar.
Is there a way you can do this with pictures?
Like u did in paint.

Because i have no idea how to set the keymaps,and so on.
I am totally new into isboxer...

And the guides doesnt help me because i need it with pictures or youtube video because i dont understand so many words in english.
I know this is a lot to ask...
But it would be so nice of you...

http://www.youtube.com/watch?v=NUtSO_dhAV8
This is how I do it, hope this helps.

[nodoze]

... This is how I do it, hope this helps.+1 to Quiding. Thanks for all you do.

[Celosar]

That is the single most helpful ISBoxer video I've ever seen.

[Verenya5454]

You are the best,thanks a lot for all your help and work quiding.
This is the last thing i ask for.
Is there a way for a last video where u show how to do it with a weak aura overlay?
And that it is shown for all 5 groupframes?

I promise i will never ask again.
Then i think i can do it.
Videos like your last are the best.
Its helpful for people who arent speak english very well.
THANKS A LOT!!!!!

[Quiding]

You are the best,thanks a lot for all your help and work quiding.
This is the last thing i ask for.
Is there a way for a last video where u show how to do it with a weak aura overlay?
And that it is shown for all 5 groupframes?

I promise i will never ask again.
Then i think i can do it.
Videos like your last are the best.
Its helpful for people who arent speak english very well.
THANKS A LOT!!!!!

https://www.youtube.com/watch?v=POdd_Ofy3Lw
Repeat this x5, the Weakaura's you'll have to play with yourself, there are loads of stuff you can grab from wago.io, mine contains some ideas I guess.
There is alot of back and forth from isboxer to wow to get the clickbars in the right position, I haven't found a easier way, the weakaura x,y no matter which anchor point you chose doesn't fit with isboxers x,y.

[Akumatv]

Holy shit! You're a literal god! I bow to your kindness!

[Verenya5454]

At first,thanks sooooo much for your help.
It is so nice of you.

I now have the problem to set this up for 5 characters.
It is not working.
I have 1 clickbar now for my main but dont know how to set this up for the others.
you said something about video fx so that it is shown on my main?
i want on my main these 5 clickbars and on the other toons just for the toon,like in your stratholme video.
Please tell me if its to much to ask for.
I know i said i never ask something again,but i learn so much because of you i want it to set it up and dont give up now :D

[Quiding]

At first,thanks sooooo much for your help.
It is so nice of you.

I now have the problem to set this up for 5 characters.
It is not working.
I have 1 clickbar now for my main but dont know how to set this up for the others.
you said something about video fx so that it is shown on my main?
i want on my main these 5 clickbars and on the other toons just for the toon,like in your stratholme video.
Please tell me if its to much to ask for.
I know i said i never ask something again,but i learn so much because of you i want it to set it up and dont give up now :D
I would recommend you watch https://www.youtube.com/watch?v=NV8fPZsuYZQ, this is how I've set it up.

A few images of my video FX mapped keys.
https://imgur.com/a/Vxd2CYV

EDIT: If you're not using DxNothing in your window layout and the resolution of your character windows are not the same you should look into this.
I would add DxNothing (https://www.youtube.com/watch?v=4VhAXqAbxjQ) if it's not already added, and then make a new window layout through the wizard and tick the Video FX to True, now it won't be blurry.

[Verenya5454]

I used videofx to see the minimap of my other toons for gathering professions.
But this is a bit complex.
My Problem with this Guides from Multiboxology.
He does everything so fast and talks so fast.
No Guides helped me from him :)
Yours are much better.

[Quiding]

I used videofx to see the minimap of my other toons for gathering professions.
But this is a bit complex.
My Problem with this Guides from Multiboxology.
He does everything so fast and talks so fast.
No Guides helped me from him :)
Yours are much better.
Made another one with voice this time, so it's your fault I had to listen to my own danglish to check if it worked.
Just a reminder, I can't make your positions for the Weakaura and Clickbars for you and you most likely can't copy mine 100% there will be alot of work involved getting it to be pixel perfect.
The Weakauras them self are also not included, some have already been posted in this thread, you just have to add more stuff to them and move them around as you want
And I just want to mention again, if all your windows are not same size 1920x1080 x5 for example, the VideoFX will be blurry.
DxNothing is a solution if you're using another layout than stacked.
Personally im not using it right now for this x4 warr, x1 sham setup, I just use x5 stacked windows at full resolution.
This is my setup, there certainly will be better ways to set it up, this is how I learned to do it.

I hope the video is understandable.

https://www.youtube.com/watch?v=N5-lxRdKi90

[Verenya5454]

I love ur denglish,hahaha :)
I will watch it when i get home.
On my brothers home at the moment.
So thankful you are such a helpful person.

There is one thing i have to ask.
Do you know if there is any way to show castbars of my groupmember.
If i heal i want to see when my heal is casting.
I did a weak aura with the name of my healer but if i do a reload it doesnt show up anymore.
I have to start wow again and that is very annoying.
Are your castbars working fine or do u have the same problem?

[Quiding]

I love ur denglish,hahaha :)
I will watch it when i get home.
On my brothers home at the moment.
So thankful you are such a helpful person.

There is one thing i have to ask.
Do you know if there is any way to show castbars of my groupmember.
If i heal i want to see when my heal is casting.
I did a weak aura with the name of my healer but if i do a reload it doesnt show up anymore.
I have to start wow again and that is very annoying.
Are your castbars working fine or do u have the same problem?
It seems like the ElvUI castbars now work for me, WeakAura castbars I can't get to work
Elvui removed party castbar option in earlier version, this brings it back https://www.reddit.com/r/WowUI/comments/d6eq8k/helpui_classic_elv_ui_since_patch_108_party/

[StingraY]

Made another one with voice this time, so it's your fault I had to listen to my own danglish to check if it worked.
Just a reminder, I can't make your positions for the Weakaura and Clickbars for you and you most likely can't copy mine 100% there will be alot of work involved getting it to be pixel perfect.
The Weakauras them self are also not included, some have already been posted in this thread, you just have to add more stuff to them and move them around as you want
And I just want to mention again, if all your windows are not same size 1920x1080 x5 for example, the VideoFX will be blurry.
DxNothing is a solution if you're using another layout than stacked.
Personally im not using it right now for this x4 warr, x1 sham setup, I just use x5 stacked windows at full resolution.
This is my setup, there certainly will be better ways to set it up, this is how I learned to do it.

I hope the video is understandable.

https://www.youtube.com/watch?v=N5-lxRdKi90

Any reason you're trying the melee team? Your starter team seemed solid. I only ask because I'm debating starting a trinity team with warrior/3 mage/priest here soon. I'd probably just be better off spending the time raising that team by farming with my melee cleave team.

Appreciate the videos and your help with a good setup.

[Quiding]

Any reason you're trying the melee team? Your starter team seemed solid. I only ask because I'm debating starting a trinity team with warrior/3 mage/priest here soon. I'd probably just be better off spending the time raising that team by farming with my melee cleave team.

Appreciate the videos and your help with a good setup.
My warrior is pretty much Bis pre-raid fury geared now, that was my main goal, the alts have decent gear as well so next step would be raiding, I would need to find a guild that does fri+sat raiding, there doesn't seem to be any on the server right now.
My next goal was to farm Strath living for orbs, they're only 20-30g on this server right now and i'm not currently in need of gold, so I'll farm that later on.
I love levelling and wanted to try something similar to my 4DK setup in cata.

[StingraY]

My warrior is pretty much Bis pre-raid fury geared now, that was my main goal, the alts have decent gear as well so next step would be raiding, I would need to find a guild that does fri+sat raiding, there doesn't seem to be any on the server right now.
My next goal was to farm Strath living for orbs, they're only 20-30g on this server right now and i'm not currently in need of gold, so I'll farm that later on.
I love levelling and wanted to try something similar to my 4DK setup in cata.

Were you able to 5 man UBRS to a certain point with your setup? If so, how was that?

[Quiding]

Were you able to 5 man UBRS to a certain point with your setup? If so, how was that?
I was amongst the 30 first or so to 60 on the horde side and made friends with a certain guild with a few 60s which joined me for UBRS rend runs, so normally I would take 1-2 DPS with me, in the start a healer aswell.
Jed and first boss is very do-able with 5man, I lacked abit of dps for rend but im sure with some more gear it wouldn't be a big deal.
I grinded out dal'rends and truestrike pretty fast this way, fishing for Jed everytime so I could bring 1-2casters so sword would have to go to me ;)

[Verenya5454]

sorry but i dont understand.
what do i have to do to see all castbars from my team in elv ui?
The link you showed me,i dont know where there are castbar settings :)
And i got your elv ui profile.
I dont see any castbars.
I dont want to see my castbar,i want to see them from my toons :)

[Quiding]

sorry but i dont understand.
what do i have to do to see all castbars from my team in elv ui?
The link you showed me,i dont know where there are castbar settings :)
And i got your elv ui profile.
I dont see any castbars.
I dont want to see my castbar,i want to see them from my toons :)

https://git.tukui.org/elvui/elvui-classic/commit/81e1975269caf7cb2c869fd2f9edbe8c63caae6b#043f037e3 abfbdf08a99d5b4961a112835e1526f
This link shows the changes the dev of elvui made to remove party castbars. You need to reverse these in your own elvui + option folders, once that is done you should be able to see the option again under party frame

[Verenya5454]

https://git.tukui.org/elvui/elvui-classic/commit/81e1975269caf7cb2c869fd2f9edbe8c63caae6b#043f037e3 abfbdf08a99d5b4961a112835e1526f
This link shows the changes the dev of elvui made to remove party castbars. You need to reverse these in your own elvui + option folders, once that is done you should be able to see the option again under party frame

But u only can see your own castbar right?
And not all 5 of the group ?

[Verenya5454]

so i have to put the red marked text into my elv ui folders?

[mihon]

so i have to put the red marked text into my elv ui folders?

Go to your ElvUI folder, and open those files that shows in the link that quiding linked with notepad or something similar.

ElvUI/Modules/UnitFrames/Groups/Party.lua (https://git.tukui.org/elvui/elvui-classic/commit/81e1975269caf7cb2c869fd2f9edbe8c63caae6b#043f037e3 abfbdf08a99d5b4961a112835e1526f)
ElvUI_OptionsUI/UnitFrames.lua (https://git.tukui.org/elvui/elvui-classic/commit/81e1975269caf7cb2c869fd2f9edbe8c63caae6b#f3ff7d3f3 80e3994c6c49cede16b14a8f6c2098c)

And i don't know if it has to go right where those lines are, but i did.
So i CTRL - F and searched for those lines and added it exactly where they are in the link.
And if you did it right it should work.

[Verenya5454]

I did go on view file copied the whole thing and did put in in these folders.
Not i dont have the option unitframes anymore :(

my notepad doesnt show the lines.

could someone maybe do that for me and put it into a pastebin?
So i only have to copy the whole thing and put it into the 2 folder?
Would be very nice.

[mihon]

my notepad doesnt show the lines.

could someone maybe do that for me and put it into a pastebin?
So i only have to copy the whole thing and put it into the 2 folder?
Would be very nice.

You should only copy and add the redlines.
But i copied everything in those 2 files and uploaded it to pastebin.

ElvUI/Modules/UnitFrames/Groups/Party.lua (https://pastebin.com/E7BissPY)
ElvUI_OptionsUI/UnitFrames.lua (https://pastebin.com/kuUhSUmG)

[Verenya5454]

You should only copy and add the redlines.
But i copied everything in those 2 files and uploaded it to pastebin.

ElvUI/Modules/UnitFrames/Groups/Party.lua (https://pastebin.com/E7BissPY)
ElvUI_OptionsUI/UnitFrames.lua (https://pastebin.com/kuUhSUmG)


Thanks for your help.
I deleted the text and copied your pastebin into it,but i still have no castbar option.


https://ibb.co/zPpyt4s

[mihon]

Thanks for your help.
I deleted the text and copied your pastebin into it,but i still have no castbar option.


https://ibb.co/zPpyt4s

Oh you want a castbar option, then i don't know.
I just added those lines and i got my castbars automatically.

[Verenya5454]

Oh you want a castbar option, then i don't know.
I just added those lines and i got my castbars automatically.

I added those Lines also,but i only see my OWN castbar in the groupframe.
Not from my Groupmembers.
But i use Lunaunitframes now for the Group.