Log in

View Full Version : [HotKeyNet] [WoW]PiP 5 clients


Slowplay
07-16-2019, 10:33 AM
Trying to get the PiP to work. The 4 minions show up on the screen in place and viewable, however the main wow1 only shows like 25% of the window and I see the desktop background. I also am trying to remove the window border and the code I used gave an error that window could not be found. I am using a 43 inch display with 3840x2160 but I am sure that those are the numbers I should be using. Any help would be greatly appreciated.



//================================================== ==============
// SAMPLE SCRIPT FOR TWO WOW'S ON ONE PC
//
// Instructions: Copy this entire script (all the blue writing
// on gray background including comments). Save it in a file.
// Load it into HotkeyNet.
//
// Toggle the scroll lock key to turn hotkeys off and on. (You
// can change this if you want, just like you can change
// everything else with HotkeyNet.)
//
// Requires HotkeyNet build 147 or higher.
//
// For more info, go to www.hotkeynet.com (http://www.hotkeynet.com)
//================================================== ==============

//-----------------------------------------------------------
// PRESS CTRL R, CTRL R, CTRL T TO RENAME WOW'S IF YOU LAUNCH THEM MANUALLY
//-----------------------------------------------------------
<Hotkey ScrollLockOn Ctrl R>
<SendPC local>
<RenameWin "World of Warcraft" WoW1>
<SendPC local>
<RenameWin "World of Warcraft" WoW2>
<SendPC local>
<RenameWin "World of Warcraft" WoW3>
<SendPC local>
<RenameWin "World of Warcraft" WoW4>
<SendPC local>
<RenameWin "World of Warcraft" WoW5>

<Hotkey ScrollLockOn Ctrl T>
<SendPC local>
<RenameWin WoW1 "World of Warcraft">
<SendPC local>
<RenameWin WoW2 "World of Warcraft">
<SendPC local>
<RenameWin WoW3 "World of Warcraft">
<SendPC local>
<RenameWin WoW4 "World of Warcraft">
<SendPC local>
<RenameWin WoW5 "World of Warcraft">


<Command SetPip>

<SendPC Local>
<SendWin %1%>
<SetWinSize 3840 2160>
<SetWinPos 0 0>
<SetWinRegion 0 0 400 400>
<SetWinRegion 0 400 400 400>
<SetWinRegion 0 800 400 400>
<SetWinRegion 0 1200 400 400>
<SendWinM %2%>
<SetWinSize 400 400>
<SetWinPos 0 0>
<SendWinM %3%>
<SetWinSize 400 400>
<SetWinPos 0 400>
<SendWinM %4%>
<SetWinSize 460 420>
<SetWinPos 0 800>
<SendWinM %5%>
<SetWinSize 400 400>
<SetWinPos 0 1200>


//------------
// TOGGLE PIP CONFIG WITH HOTKEY
//------------
<Hotkey ScrollLockOn F1>
<Toggle>
<SetPip WoW1 WoW2 WoW3 WoW4 WoW5>
<Toggle>
<SetPip WoW2 WoW1 WoW3 WoW4 WoW5>
<Toggle>
<SetPip WoW3 WoW1 WoW2 WoW4 WoW5>
<Toggle>
<SetPip WoW4 WoW1 WoW2 WoW3 WoW5>
<Toggle>
<SetPip WoW5 WoW1 WoW2 WoW3 WoW4>








//-----------------------------------------------------------
// DEFINE MAIL LABELS FOR SENDING KEY STROKES
//-----------------------------------------------------------
<Label w1 Local SendWinM WoW1>
<Label w2 Local SendWinM WoW2>
<Label w3 Local SendWinM WoW3>
<Label w4 Local SendWinM WoW4>
<Label w5 Local SendWinM WoW5>

//-----------------------------------------------------------
// DEFINE HOTKEYS FOR ALL KEY COMBINATIONS THAT WILL GET
// SENT TO BOTH WOWS. ADD MORE KEY COMBO'S IF YOU WANT.
//-----------------------------------------------------------
<Hotkey ScrollLockOn Q, E, R, F, C, v, Numpad0, Numpad1, Numpad2; ScrollLockOn LSHIFT R; ScrollLockOn LSHIFT E; ScrollLockOn LSHIFT C; ScrollLockOn LSHIFT Q; ScrollLockOn LSHIFT F>
<SendLabel w1, w2, w3, w4, w5>
<Key %Trigger%>






//-----------------------------------------------------------
// BROADCAST MOUSE CLICKS. HOLD DOWN OEM3 (ON U.S. KEYBOARDS,
// THAT'S THE SQUIGGLE KEY IN UPPPER LEFT CORNER) WHEN YOU
// WANT TO BROADCAST.
//-----------------------------------------------------------
<UseKeyAsModifier Oem3>

<Hotkey ScrollLockOn Oem3 LButton, MButton, RButton, Button4, Button5>
<SendLabel w1, w2, w3, w4, w5>
<ClickMouse %TriggerMainKey%>
<RestoreMousePos>
muldorante
07-21-2019, 10:22 AM
Try using the code that Wubsite posted recently, It's working and easy to adjust.

Source: https://www.dual-boxing.com/threads/55371-HOTKEYNET-I-m-trying-to-add-a-4th-window-and-more-space-for-the-PiP-interface-I-have-set-up-need-some-help?p=418430&viewfull=1#post418430



Ohoyhoy.

Took a bit since I don't use Hotkeynet anymore, but here's a slightly changed version that worked fine for me:

https://pastebin.com/BMdTdzjN


//-----------------------------------------------------------
// PRESS CTRL R TO RENAME WOW'S IF YOU LAUNCH THEM MANUALLY.
//-----------------------------------------------------------
<Hotkey ScrollLockOn Ctrl R>
<If WinSizeIs "World of Warcraft" 470 265>
<SendWinM "World of Warcraft">
<RenameWin "World of Warcraft" HiddenDialogBox>
<Else>
<RenameWin "World of Warcraft" WoW1>
<RenameWin "World of Warcraft" WoW2>
<RenameWin "World of Warcraft" WoW3>
<RenameWin "World of Warcraft" WoW4>
//-------------
// SET PIP CONFIGURATION
// Usage: <SetPip BigWindowName LittleWindowName>
// This command is called by <Hotkey F1> which is defined below.
//-------------
<Command SetPip>
<TargetWin %4%>
<SetWinSize 525 300>
<SetWinPos 1300 715>
<TargetWin %2%>
<SetWinSize 525 300>
<SetWinPos 1300 415>
<TargetWin %3%>
<SetWinSize 525 300>
<SetWinPos 1300 115>
<TargetWin %1%>
<SetWinSize 1920 1080>
<SetWinPos 0 0>
<TargetWin %2%>
<SetForegroundWin>
<UpdateWin>
<TargetWin %3%>
<SetForegroundWin>
<UpdateWin>
<TargetWin %4%>
<SetForegroundWin>
<UpdateWin>
<TargetWin %1%>
<SetWinRegion 1300 115 525 900>
<SetForegroundWin>
//------------
// TOGGLE PIP CONFIG WITH HOTKEY
//------------
<Hotkey ScrollLockOn F1>
<Toggle>
<SetPip WoW1 WoW2 WoW3 WoW4>
<Toggle>
<SetPip WoW2 WoW1 WoW3 WoW4>
<Toggle>
<SetPip WoW3 WoW1 WoW2 WoW4>
<Toggle>
<SetPip WoW4 WoW1 WoW2 WoW3>

// SUBROUTINE TO LAUNCH AND RENAME A COPY OF WOW.
//---------
<Command LaunchAndRename>
<SendPC %1%>
<Run "C:\World of Warcraft\_retail_\WoW.exe">
<wait 1500>
<RenameWin "World of Warcraft" PreDummyBox>
<RenameWin "World of Warcraft" %2%>


//----------
// HOTKEY TO LAUNCH AND RENAME BOTH WOW'S.
//----------
<Hotkey ScrollLockOn Alt Ctrl L>
<LaunchAndRename Local WoW1>
<RemoveWinFrame>
<LaunchAndRename Local WoW2>
<RemoveWinFrame>
<LaunchAndRename Local WoW3>
<RemoveWinFrame>
<LaunchAndRename Local WoW4>
<RemoveWinFrame>


//-----------
// DEFINE MAIL LABELS FOR SENDING KEY STROKES.
//-----------
<Label w1 Local SendWinM WoW1>
<Label w2 Local SendWinM WoW2>
<Label w3 Local SendWinM WoW3>
<Label w4 Local SendWinM WoW4>

// HOTKEYS
//--------------

//FIRST, WE DEFINE A KEYLIST CALLED MYLIST INSTEAD OF USING HOTKEYS

<KeyList MyList A-Z, 0-9, Period, Comma, Oem1, Oem2, NumPad0-Numpad9, NumPadEnter, F2-F12, Esc except W, A, S, D, J, Q, E, X>
<KeyList MyList2 A-Z, 0-9, Plus, Minus, F1-F12, NumLock, except W, A, S, D, f1, E, Q>
<Hotkey ScrollLockOn MyList; ScrollLockOn Shift MyList2>
<SendLabel w1, w2, w3, w4>
<Key %Trigger%>
// F1 HAS BEEN DELETED FROM THE LIST SINCE IT'S ALREADY DEFINED. Q, E AND X HAVE BEEN ADDED TO THE EXCLUDE




//---------------
// DEFINE MOVEMENT KEYS THAT WILL GET SENT TO BOTH WOW'S.
// ADD MORE KEYS IF YOU WANT.
//---------------
<KeyList MoveSet up, down, left, right, X, Space>
<MovementHotkey ScrollLockOn MoveSet>
<SendLabel w1, w2, w3, w4>
<Key %Trigger%>
// SPACE AND X ADDED TO THE MOVEMENT KEYS. ADD Q AND E IF YOU WANT THOSE KEYS TO PASS TO SLAVES FOR STRAFING.



//-----------------------------------------------------------
<Hotkey ScrollLockOn Alt LButton, MButton, RButton, Button4, Button5>
<SendLabel w1, w2, w3, w4>
<ClickMouse %TriggerMainKey%>
//-----------------------------------------------------------


// USE PAUSE TO TOGGLE BROADCASTING ON AND OFF WHEN TYPING IN THE CHAT WINDOW OR ANYTIME YOU DON'T WANT EVERYONE RESPONDING TO KEYSTROKES.

//------------------
//TOGGLE HKN MUTE
//------------------
<hotkey Pause>
<sendpc local>
<ToggleHotkeys>


//-----------------------------------------------------------
// BROADCAST MOUSE CLICKS. HOLD DOWN OEM3 (ON U.S. KEYBOARDS,
// THAT'S THE SQUIGGLE KEY IN UPPPER LEFT CORNER) WHEN YOU
// WANT TO BROADCAST.
//-----------------------------------------------------------
<UseKeyAsModifier Oem3>
<Hotkey ScrollLockOn Oem3 LButton, MButton, RButton, Button4, Button5>
<SendLabel w1, w2, w3, w4>
<ClickMouse %TriggerMainKey%>

Here's it working just fine for me with 4 clients. Swapping seems to work too.

https://youtu.be/0i2-CFbDlUg

Seems to me the issue was relating to the hidden windows that open with every single instance of WoW nowadays. I believe your script was trying to place those in to the PiP fields instead of the actual game clients. I could be wrong though, but whatever it is, I seem to have fixed it.

Remember to change the WoW path back to match your installation.

PS. There were some dual definitions for hotkeys and movement hotkeys. I got rid of those. Hopefully there wasn't anything else you specifically made in those definitions. :3