4.1 Prot Pally Tanking Rotation

[lans83]

You need to set up a two macro system for this one to work.

First macro:
/startattack
/click BT4Button5
/click BT4Button6
/cast Hammer of Wrath
/script UIErrorsFrame:Clear(); UIErrorsFrame:Show()

If you don't use Bartender4, then change the BT4Button5 and 6 to ActionButton and whatever numbers you want them to, like 1-9
The script will force the red error messages to clear out when you spam this button, if you get the error noise, you can grab the sound file that removes it from Curse.

http://wow.curse.com/downloads/wow-addons/details/project-8021.aspx

It's a sound file that replaces the current one that still works to this day I use.

Second Macro:
/castsequence reset=3 Hammer of the Righteous,Judgement,Hammer of the Righteous,Word of Glory,Hammer of the Righteous,Shield of the Righteous,Judgement,Hammer of The Righteous,Shield of the Righteous,Hammer of the Righteous,Shield of the Righteous

Place macro 1, the spam macro above on whatever button you'll spam for this, then place Second macro on whatever hotbar you set in the spam macro, then the Avenger's Shield spell itself in the next hotbar. Only downtime on you'll get is from global cooldown and maybe a second or so at as the next spell comes off cooldown. With this, you'll still be able to spam the hell out of Avenger's Shield left and right. But like before, make sure you're Spell/Hit capped for whatever you're goin up against or you risk your HotR not landing for HP and it hanging up on SotR or WoG. You can also lower the time on the reset= to 1 or 2 if it'll help with that if you're missin too much.

The following spec should also help you out. It's a mix of both the Self Healing/Fast Threat building specs I've seen on Elitist Jerks. May not be a perfect build and rotation, but it should help you build, hold, and maintain a good hold on anything you pull.

http://www.wowhead.com/talent#sZGrhfRzdRMuf0h:oskbcqzcm

As an added bonus, what I did was made /cast [@mouseover] macros for alot of my other spells and put them at my fingertips. Separate macros for Rebuke, Avenger's Shield, so I can use it a little more if it's not poppin with the above macro, also helps with pulling, and regaining threat from healers. And one for Hand of Reckoning. I also use Tauntmaster from Curse for threat monitoring. Others use Clique or similar addons, but TM is lightweight and easy to set up. I like it and it works for me.



Hope this helps ya'll. I just copied and pasted here from my post on the WoW and WowHead forums.



Edit: You can make another /castsequence rotation macro the same way, but swap the HorR for CS for single targets. I use HotR because I've found that it refreshes my AS way more than CS did during fights allowing me to put out more damage with it and use AS as a filler between spells that were still on cooldown. Try it, if you don't like it, then switch back to your style. Even with 1HP SotR hitting, atleast you've got that constant damage being tossed out instead of waiting every 3 seconds for your HotR or CS to cooldown to use them. This works for me and has not let me down, nor have any of my macros I've come up with. Again, to each their own, I'm just trying to help.






Edit: 6-10-11 Reposting new macros from a post I made back in May. I have not been on much with my Pally to test these as I have been working nearly non stop since I last came up with these. I was hoping that with all the views to this thread, someone might have had some luck with them and if so, what do you think?



Just replace this one with the first /castsequence I posted and use it with the SPAM button I made to /click this macro, then the Avenger's Shield spell too. This macro reached the 255 mark, so I couldn't group them all together in one macro.

Mob rotation:
/castsequence reset=3 Hammer of the Righteous,Judgement,Hammer of the Righteous,Inquisition,Hammer of the Righteous,Inquisition,Judgement,Hammer of The Righteous,Inquisition,Hammer of the Righteous,Holy Wrath,Hammer of the Righteous,Word of Glory

Just use this one on bosses/single target pulls by it'self.

Single Target macro:
/castsequence reset=3 Crusader Strike,Judgement,Crusader Strike,Shield of the Righteous,Crusader Strike,Judgement,Crusader Strike,Shield of the Righteous,Crusader Strike,Holy Wrath,Crusader Strike,Word of Glory
/cast Avenger's Shield
/cast Hammer of Wrath

Again, I use Consecration manually.

An opening boss fight macro that might help. If running with others, warn them not to fight till after the AS is cast.

#showtooltip
/castsequence reset=60 Divine Plea, Inquisition, Exorcism, Avenger's Shield


The original /castsequence can be changed also to replace the Word of Glory at the beginning with the Shield of the Righteous at the end, this way if the macro resets before WoG is off it's cooldown, the macro will not get hung up on you. Downside however is having Judgement hang it up if it's still on cooldown :/ I'm wanting to get back into the tanking game now that I'm starting to have a little free time more than before.

[JohnGabriel]

Thanks, this will be useful. Been working on leveling a pali to replace my current DK tank, not happy at all with the mastery on the DK tank.

[lans83]

Well, I'm not promising top performance from this. I'm catching alot of flaq from people on the other forums for this telling me that it's gimping performance with a /castsequence. I've found it to be better than having to stretch my hand halfway across the damn keyboard just to hit my spells. But then I guess they're also not mashing the spam button like we do when multiboxing. Even after 4.0 with the new setup, my old /castsequence was damn good and even improved my brother's fights. Don't know about the critics on the other board, but if I can pop off a damage spell between my main spell cooldowns, I'm gonna do it. Even if it means weak hits. Atleast it's more damage being tossed out there with a 1hp SotR. Even before, the damn EJerks' posts stated you can use both WoG and SotR in a rotation. Those people just never came up with a /castsequence. I may be gimping, but even on tanking the rare zombie beast over in TwHlands, those fuckers only pulled threat off me a few times and i was 84. My gear was too low for surviving the hits he sent my way, but yes, I kept aggro off raid geared dps and healers. even if for a moment at times :/ Had I been 85 and geared better, I wouldn't have had any problems.

[Kekkerer]

I am looking to improve my pally tanking rotation as well but i want it to work with my dk priority system spam, this is what i have so far:

button 1: avenger's shield
button 2: hammer of wrath
button 3: divine protection
button 4: /castsequence reset=5 Judgement,Hammer of the Righteous,Shield of the Righteous,Hammer of the Righteous,Crusader Strike

[lans83]

I typically use AS to pull my mobs instead of Judgement and the Hammer and Crusader strike that close to one another in a rotation with nothing being cast between them will cause you to have to sit and wait on them to come off cooldown. Hammer and CS both share a cooldown, Hammer is meant for mobs, CS for single targets/bosses. Don't mix them in the same /castsequence unless you're tryin to fill up the character limit allowed. Best to have one macro for each. But the way I have mine set up is my main spam button is the first macro. I spam that which makes it click my /castsequence macro first, then my AS between spells or during the global cool down. This way I can pop off AS alot more than tryin to do it manually unless I chose to. I also have an AS /cast [@mouseover] macro for adds, pulling, or whatever. But with this, I'm using it also in my rotation. People on the other forums keep sayin that with this over their original style, they're losing TPS with this, but it's not that different from my original macro before the 4.1 change to WoG and Elitist Jerks never came up with anything for either from what I read as far as macros unless they couldn't get it for some reason, and nothing was/is posted since the change. I might've overlooked it, but this is what I have workin for me. Feel free to change it up if you want, add anything to it if you want, I don't care. With WoG in there and the talent for it, you're pretty much guaranteeing yourself the added damage bubble from the over healing if the healer bothers to keep you topped off. Especially with raiding. Again, the 1hp SotR may be week, but the constant damage from them back to back and AS in between should make up for it. If you put AS in the rotation, you're setting yourself up for a hangup in the rotation if you use it when it's refreshed before it reaches it in the sequence, or wasted chances if you only use it in the sequence and not as a filler.

[Kekkerer]

Ok I've mended my macro to this:

Single target:
button 1: /castsequence reset=combat Crusader Strike,Crusader Strike,Crusader Strike,Shield of the Righteous
button 2: judgement
button 3:hammer of wrath
button 4:/use 10 /cast divine protection /cast Avenger's Shield

AOE:
button 1: /castsequence reset=combat Hammer of the Righteous,Hammer of the Righteous,Hammer of the Righteous,Shield of the Righteous
button 2: judgement
button 3:Holy Wrath
button 4:/use 10 /cast divine protection /cast Avenger's Shield

I spam 1 button that spams all 4 of these, got two now one for aoe and one for bosses.

Edit: The aoe one works well but I have large gaps in my single target one.

[Heavyd]

you should put holy wrath in both rotations. if you're going up against one target all the damage goes to the one target.

Your button2 should be judgement, holy wrath

[lans83]

I came up with this in a hurry, but yes, you can swap out the second SotR with Holy Wrath to cast so you'll have 2hps for the third SotR in the rotation I've listed. Haven't tested it yet or timed it, but the downtime between each HW shouldn't be no more than 20 seconds, so you'll only have about 5 or so seconds of downtime between each use. If you swap HW with Hammer of Wrath, you should cast it as a filler also like AS is, but not sure if it'll get hung up and not cast it if AS is on cooldown. Been a while since I had HW in a rotation for my pally. I've been using that and Cons as situational spells due to the cooldowns on them, so I don't use them constantly. Boss fights, I hit them every second they come off cooldown tho. If anyone from here wouldn't mind putting this to the test like EJ does, could you post the results? Other forums are still givin me shit for it.

[Kekkerer]

I came up with this in a hurry, but yes, you can swap out the second SotR with Holy Wrath to cast so you'll have 2hps for the third SotR in the rotation I've listed.

I am not sure what you mean by this.

Both for my AOE and single target rotation I added the following macro:

/castsequence reset=8 judgement, holy wrath

My rotations now are:

Single target:
button 1: /castsequence reset=combat Crusader Strike,Crusader Strike,Crusader Strike,Shield of the Righteous
button 2: /castsequence reset=8 judgement, holy wrath
button 3: hammer of wrath
button 4: /use 10 /cast divine protection /cast Avenger's Shield

AOE:
button 1: /castsequence reset=combat Hammer of the Righteous,Hammer of the Righteous,Hammer of the Righteous,Shield of the Righteous
button 2: /castsequence reset=8 judgement, holy wrath
button 3: /use 10 /cast divine protection /cast Avenger's Shield

I personally like that divine protection and avenger's shield are used in the rotations. Conse i like to keep out though since it has some very good situational uses.

Edit: Sometimes my holy power does not get used up does that mean that my shield missed or is it being skipped over somehow?

[lans83]

Chances are your Shield is missing, if so, check your hit/spell hit rating, make sure you're capped for whatever you're goin up against. I've never noticed mine to miss, but in the unlikely hood that it does and not use the HP, the next SotR should use it up soon after instead of waiting that whole 9+seconds again. Then again, it could also be a bug from the new patch. I use DP as a situational also. I've got a whole hotbar with my long cooldowns on I activate with my mouse cursor instead and tend to use them for boss fights or in tough battles. I've hardly ever had to use my LoH and/or bubbles in dungeons. Now that I'm running more and more Cata dungeons, I'm starting to use them a little more then I used to. I came up with the WoG/SotR mixed macro before 4.1 when I was soloing old content and wanted the added effects of WoG and it's related talents. The build I listed is also a combination of both the survivability and threat building specs listed from EJ's site. Even if the WoG heal is wasted healing on yourself when already topped off, if talented for it, you'll get the buff/bubble of extra health/damage reduction from it. This has helped me out in many situations.

[Kekkerer]

Yeah I have 0 hit rating and expertise because I'm not up to 102.4% avoidance & block cap yet. Tanked a successful ZA mount run yesterday with my two macros, people were pulling 20-25k dps each overall for the first 4 bosses, single target dps was not an issue, had some issues with people aoeing but that is probably a reflection on my gear rather than the macros.

[Mercurio]

Thanks for this, Lans83. I tried your rotation for a bit, tweaked things in a number of different ways, then ended up going back to your rotation as I liked it the best.

I've updated it in my Macros Compendium accordingly. Thanks for your contributions to the community. We love those contributions here (unlike the hateforums at Blizz). ;)


One other thing - Eternal Glory is probably not worth taking now for Prot Pallies. Instead of that, which is included in the build you linked, I would opt for Reckoning.

[lans83]

Thanks Merc, I'll make that change. Wasn't too sure about keeping EG, but I figured it wouldn't hurt much. I'll make the change when I log back in.

[daanji]

you should put holy wrath in both rotations. if you're going up against one target all the damage goes to the one target.

Your button2 should be judgement, holy wrath

Heavyd? Are you the same Heavyd that used to play on firetree and was once a member of the guild called Shadow?

[Heavyd]

Nope. That's not me. I box(ed) on Doomhammer for a while.

[Kvas]

My rotations now are:

Single target:
button 1: /castsequence reset=combat Crusader Strike,Crusader Strike,Crusader Strike,Shield of the Righteous
button 2: /castsequence reset=8 judgement, holy wrath
button 3: hammer of wrath
button 4: /use 10 /cast divine protection /cast Avenger's Shield


It makes it two buttons, but I leave off SotR and manually fire it off. I like to micro the tank a bit, so it's not that difficult and has a nice benefit for extra effort.

Using a similar setup to what you have, I added a button for consecration and a separate one for holy wrath. But then found that crusader strike seem to deprioritize and not fire off enough. So, my current iteration essentially has fall through macros for each ability.

for example the Avenger Shield button looks like this, for other abilities substitute their name for Avenger's Shield:

#showtooltip Avenger’s Shield
/castsequence Crusader Strike, Crusader Strike, Crusader Strike
/cast Avenger’s Shield
/use 14
/cast Divine Protection

The biggest problem is judgement and Hammer of Wrath felt like they weren't firing off properly, I just put /cast Judgement and /cast Hammer of Wrath on that button. So the main mashing macro looks like this:

/startattack
/click Crusader's Strike
/click Judgement
/click Hammer of Wrath
/click Avenger's Shield Button
/click Consecration Button
/click Holy Wrath Button
/script UIErrorsFrame:Clear()

AoE looks similar, but with HotR in lieu of CS and changed the order of buttons to prioritize different abilities.

Had quite a bit of success with this so far. I'm not convinced abilities are being prioritized perfectly though, but it was a pretty healthy gain in dps/threat from the simple two button macro.

Anyhow, hope this wasn't too confusing, I'm still learning exactly how stuff "falls through" and how to really prioritize what I want to.

[cookcpu]

I can't fill in the last 2 spell as it have reach the 255 chars limit and also after spamming a while at the dummy, I can only get auto attack unless I stop pressing the key for 3 sec then the macro will reset and start all over again.

I am not sure what I did for the macro to stop working, can it be due to the last 2 spell not in the macro that cause the macro not to work after spamming it.

[Sturmy]

I can't fill in the last 2 spell as it have reach the 255 chars limit and also after spamming a while at the dummy, I can only get auto attack unless I stop pressing the key for 3 sec then the macro will reset and start all over again.

I am not sure what I did for the macro to stop working, can it be due to the last 2 spell not in the macro that cause the macro not to work after spamming it.

Not sure which macro you're using (first page filtered at work), but sounds like you're using a reset=3 in your macro. It'll reset the macro after 3 seconds "BUT" only 3 seconds of not touching it. Putting a reset="time" in a spam macro is useless, as it'll never reset. (remember it's 3 seconds from "last click of macro".

If you could confirm which you're using could explain a bit better

Thanks

[Khatovar]

Not sure which macro you're using (first page filtered at work), but sounds like you're using a reset=3 in your macro. It'll reset the macro after 3 seconds "BUT" only 3 seconds of not touching it. Putting a reset="time" in a spam macro is useless, as it'll never reset. (remember it's 3 seconds from "last click of macro".

If you could confirm which you're using could explain a bit better

Thanks

I disagree. In the case of the poster you quote, not having a reset=x seconds means the macro won't reset at all until it gets to the end. The way castsequences and reset commands work is after this condition is met OR after the macro sequence has been completed, that macro starts at the beginning. So, reset should have NOTHING to do with it.

The macro {whatever one it is since Cookcpu didn't actually post it} is getting stuck somewhere, preventing the macro from processing something so it can complete the sequence and start over. This points to a typo in the macro, a spell listed in the sequence that they don't actually have, improper punctuation or spacing {a period instead of a comma perhaps}, a spell listed that is not having prerequisites met {Judgement when there is no Seal active, A spell that requires Holy Power when there is no HP built up} or something with a long cooldown that is getting recalled too early.

[cookcpu]

Not sure which macro you're using (first page filtered at work), but sounds like you're using a reset=3 in your macro. It'll reset the macro after 3 seconds "BUT" only 3 seconds of not touching it. Putting a reset="time" in a spam macro is useless, as it'll never reset. (remember it's 3 seconds from "last click of macro".

If you could confirm which you're using could explain a bit better

Thanks

I am copying the macro posted on the 1st post except for the macro 2, I have reach the limit of 255 chars before completing the entire macro. I am using WOW macro and I am not using ISboxer macro.

Initially, I double check on the macro to find any typo mistake and I have found some overlapping of words in the macro. I have corrected that but the problem still exist even I change the reset=1. With reset=1, the test on the dummies last slightly longer before it become auto attack.

Yes, I have to stop pressing the key for 1 sec before the macro start again.

[cookcpu]

The macro {whatever one it is since Cookcpu didn't actually post it} is getting stuck somewhere, preventing the macro from processing something so it can complete the sequence and start over. This points to a typo in the macro, a spell listed in the sequence that they don't actually have, improper punctuation or spacing {a period instead of a comma perhaps}, a spell listed that is not having prerequisites met {Judgement when there is no Seal active, A spell that requires Holy Power when there is no HP built up} or something with a long cooldown that is getting recalled too early.

I suspect it might not having prerequisites being met for the castsequence command to continue as I have to leave out 2 spell from the original macro posted in the 1st post.

[Sturmy]

I suspect it might not having prerequisites being met for the castsequence command to continue as I have to leave out 2 spell from the original macro posted in the 1st post.

Any chance of posting the one you're using currently? (as mentioned first page is filtered at work for some reason :P)

Thanks

[lans83]

The filters are probably keeping you from seeing it due to the links I posted in it to Curse for the addon/file and to Wowhead for the talent tree build. I'm in the process of rewording the castsequence for those that might have trouble with it resetting too early before WoG is off cooldown making this pretty much useless. Haven't been playing much lately and have yet to even log into my pally since I came up with this. I was thinking of putting WoG on the end of the castsequence, but seeing other macros posted on this page, I'm going to try them out as well and see how I like'em over my original one. If I like it and don't have trouble with it, I'll edit the first post so everyone can see it, hopefully, maybe get the one on the sticky changed as well. Wasn't thinking of the reset=3 screwing anyone over before WoG was off cooldown :/ sorry. Don't know why you're havin trouble there Cook, instead of copying it, try manually typing it out and see if that'll help. I have had trouble with the copy/paste function from other threads on here others have posted for /castsequences. After that, I've always manually typed them out in the game, and I also use the default WoW macro pages :/ They should really expand this by now since we're able to save them on our own PCs. They are the macro-cache.txt files deep in the WTF folder under each character under each account. Main macros are in the main folder under each main folder with the account's 'Login name'. You can copy/paste these files from one account to another as well. Did this for my shaman and hunter teams from my main's folder. Same goes for SavedVariable.lua (effects some UI addons), and the bindings files (key bindings). I copied over the SavedVariables folder as well so the addon settings would follow over to the other accounts as well. BACKUP your original files before doing any of this in the unlikely event of something going wrong or messing up. I did btw, and suggest anyone do the same.

[cookcpu]

The filters are probably keeping you from seeing it due to the links I posted in it to Curse for the addon/file and to Wowhead for the talent tree build. I'm in the process of rewording the castsequence for those that might have trouble with it resetting too early before WoG is off cooldown making this pretty much useless. Haven't been playing much lately and have yet to even log into my pally since I came up with this. I was thinking of putting WoG on the end of the castsequence, but seeing other macros posted on this page, I'm going to try them out as well and see how I like'em over my original one. If I like it and don't have trouble with it, I'll edit the first post so everyone can see it, hopefully, maybe get the one on the sticky changed as well. Wasn't thinking of the reset=3 screwing anyone over before WoG was off cooldown :/ sorry. Don't know why you're havin trouble there Cook, instead of copying it, try manually typing it out and see if that'll help. I have had trouble with the copy/paste function from other threads on here others have posted for /castsequences. After that, I've always manually typed them out in the game, and I also use the default WoW macro pages :/ They should really expand this by now since we're able to save them on our own PCs. They are the macro-cache.txt files deep in the WTF folder under each character under each account. Main macros are in the main folder under each main folder with the account's 'Login name'. You can copy/paste these files from one account to another as well. Did this for my shaman and hunter teams from my main's folder. Same goes for SavedVariable.lua (effects some UI addons), and the bindings files (key bindings). I copied over the SavedVariables folder as well so the addon settings would follow over to the other accounts as well. BACKUP your original files before doing any of this in the unlikely event of something going wrong or messing up. I did btw, and suggest anyone do the same.

I will try to take out WoG spell and see whether it will solve the problem.

I have been typing macro instead of copy/paste into the WoW macro pages. If by typing out the macro into the SavedVariable.lua will help to get rid of the chars limit then I will give it a try. (I will backup all the files before doing it.) Thank you.

[lans83]

If by typing out the macro into the SavedVariable.lua will help to get rid of the chars limit then I will give it a try.


I'd suggest typing them out while playing the game in the macro creation panel so you can tell how many 'characters' you're typing so you'll know whether or not you reach the 255 mark. You can't exceed that limit if you type them in the .lua file. I suggested those files only after you get them to work correctly while ingame. This way you don't have to copy/paste so many macros one after another from one toon to another. Easier to just copy that toon's whole list over. I found this out when starting over on new servers. I first copied over my 85 hunter's macro list to my new one on another server to shave off time. Then adjusted each macro to take out spells I did not yet have according to level/spec requirement. You don't have to have WoG in that rotation, make sure it's not in there if you don't have it yet. I put that in there for the 'Guarded by the Light' 2pt bonus and self healing for when I solo things. Give it time, I'll bet like the portals, this will get another change either to it's 20second cooldown, or better heal over time effect. You can glyph it to get that now tho, but I'm not sure how it'll effect the 'overhealing' part of the talent.

[Khatovar]

I'd suggest using the Macro Explain-o-matic (http://www.macroexplain.com/). It'll show you how many characters are used, what the macro does and if you have a typo, it'll put a question mark or exclamation point up in the explain section showing you that there's an error.

[cookcpu]

I'd suggest typing them out while playing the game in the macro creation panel so you can tell how many 'characters' you're typing so you'll know whether or not you reach the 255 mark. You can't exceed that limit if you type them in the .lua file. I suggested those files only after you get them to work correctly while ingame. This way you don't have to copy/paste so many macros one after another from one toon to another. Easier to just copy that toon's whole list over. I found this out when starting over on new servers. I first copied over my 85 hunter's macro list to my new one on another server to shave off time. Then adjusted each macro to take out spells I did not yet have according to level/spec requirement. You don't have to have WoG in that rotation, make sure it's not in there if you don't have it yet. I put that in there for the 'Guarded by the Light' 2pt bonus and self healing for when I solo things. Give it time, I'll bet like the portals, this will get another change either to it's 20second cooldown, or better heal over time effect. You can glyph it to get that now tho, but I'm not sure how it'll effect the 'overhealing' part of the talent.

Ok noted in regards to copying those lua file to other chars. Thank you.:)

[cookcpu]

I'd suggest using the Macro Explain-o-matic (http://www.macroexplain.com/). It'll show you how many characters are used, what the macro does and if you have a typo, it'll put a question mark or exclamation point up in the explain section showing you that there's an error.

Thank you, I will try it out. :)

[lans83]

Another thing I just caught on to. Not sure if you're doing it Cook, but just in case, make sure you're not putting any spaces after the comma and before the next spell. Each space between the words takes up 1 character on the 255 limit.

[lans83]

Was wondering if someone could test these two sequences out for me and tell me what you think compared to the original sequence I made and help me arrange them what needs to be arranged. Plus you think you can put them through a TPS/Recount test and post some results? Mine don't want to work for me right and I don't know how to use that TPS addon everyone else uses.


Just replace this one with the first /castsequence I posted and use it with the SPAM button I made to /click this macro, then the Avenger's Shield spell too. This macro reached the 255 mark, so I couldn't group them all together in one macro.

Mob rotation:
/castsequence reset=3 Hammer of the Righteous,Judgement,Hammer of the Righteous,Inquisition,Hammer of the Righteous,Inquisition,Judgement,Hammer of The Righteous,Inquisition,Hammer of the Righteous,Holy Wrath,Hammer of the Righteous,Word of Glory

Just use this one on bosses/single target pulls by it'self.

Single Target macro:
/castsequence reset=3 Crusader Strike,Judgement,Crusader Strike,Shield of the Righteous,Crusader Strike,Judgement,Crusader Strike,Shield of the Righteous,Crusader Strike,Holy Wrath,Crusader Strike,Word of Glory
/cast Avenger's Shield
/cast Hammer of Wrath

Again, I use Consecration manually.

An opening boss fight macro that might help. If running with others, warn them not to fight till after the AS is cast.

#showtooltip
/castsequence reset=60 Divine Plea, Inquisition, Exorcism, Avenger's Shield