IWT Dummies

[CheeseCake]

Running priest and 4 Death knights and have alot of problems with it

My first mele team at the moment level 60

Testing them out on the dummies i bound the IWT option to the razor naga num2 key
When i click the button i get 'target is to far away' even though im almost on top of the dummy
it does randomly work but as usual they run off in all directions, so bound the follow to the naga num1 key
Focus target bound to E key

razor naga is usually all for heals but trying to mess around with whats easy to get this mele team working

keys 2-3 are my castsequence spam keys, would be nice if i only had to use my 2 and 3 keys, so i can focus on heals

[Khatovar]

When i click the button i get 'target is to far away' even though im almost on top of the dummy



This sounds like a camera angle problem. From another post (http://www.dual-boxing.com/showthread.php?t=33717&highlight=Interact) I made talking about IWT


Slaves not moving is usually due to the slaves being unable to find a location to click. This is especially common when the server and client don't agree on the location of a mob, or in places where the terrain is cluttered or uneven {awnings, posts, boxes in the way} and the camera angle doesn't allow the slaves to target and click properly. Simply moving a few paces is usually enough to fix this.

Your camera angle is probably leaving your slaves with obstructed camera angles since they're basically under the dummy and trying to "click" on the arms, weapons, shields, other toons, whatever is in the way, because they can't "see" the ground.

[CheeseCake]

Thanks about the camera
Prob should of looked better for that post you sent before posting :/
I was attacking the level 60 dummies in IF
moved out to the open where the level 80 dummies are and they IWT every time from a distance :D ... How weird.

Managed to clear ramparts, lost 3 deathknights on the 4th pull as one drifted off to two more mobs
but was fine after that, no wipes. just down to not totally spamming IWT and using the follow key when they start to wonder off.

Main window i have to zoom out pretty far so i can keep track of who wonders off, so much going on next thing i know one or two have gone into the next mob :/
The slaves i had 2 instances of target is to far away, in ramparts.

[CheeseCake]

Got a new problem but may aswell continue with this thread

I will try explain this best i can :/
Main PC - 1st account
PC2 - 4 Slaves

Sometimes when i attack mob/boss in the middle of the fight it seems everything locks up,, all 4 death knights will start moving backwards (not walk, they glide backwards ) This cannot be stopped at all.
Main window (priest comes out of it)

Also sometimes during a fight maybes 1 or 2 death knights wont do anything, click IWT a few more times and they will.
Some spells Dont activate either, will post what i have so far.

Im very new to death knights.
Pretty much flew through 55 to 70 with heirlooms and questing only did 2 BC instances as i was leveling another team via BC only

All 5 currently level 70

Main - Holy Priest
4x Blood Death knights

Key 1 -
/castsequence reset=combat/60 Horn of Winter, Bone Shield, NUL

Key 2 - Spam
#showtooltip
/Assist Focus
/castsequence reset=combat Heart Strike, Death Strike
/cast Rune Strike
/Use 13
/Use 14
using this for now as i figure out what else should be added
Had a much longer one but castsequence macros arnt doing to good on these death knights

Key 3 - still working on another spam setup so currently empty for now

Key 4 -
#showtooltip
/castsequence reset=combat/60 Vampiric Blood, Anti-Magic Shell, Dancing Rune Weapon,NUL

Dancing rune struggles to activate sometimes even though i see full runic power

Key 5 - Rune Tap

Key 6 - #showtootip
/castsequence reset=combat Raise Dead, Icebound Fortitude
/cast Blood Tap

ISboxer Round Robin
#showtooltip
/assist focus
/cast Death Grip
/cast Dark Command

ISboxer Mouse Brodcast for Death and Decay x4

Using Razor Naga Mouse
Num 1 Follow
Num 2 IWT
Num 3 AOE Heals
Num 4+ Targeted Heals

I pretty much always use the mouse for Heals only, so need to get Follow and IWT removed and added somewhere else for easy acces to my fingures to spam.

[Ualaa]

Not sure why your abilities would cause a lock up.
Check to ensure you don't have any mapped keys that do an action which calls an earlier mapped key, like this:
Hotkey Causes A > Which does B > Which calls A > Which wants to cycle into B....



If you ran the wizard, you'll have FTL modifiers set up.
Which means you can ditch Focus entirely for assist purposes.

When you push "1", it will send "1" to every DK.
But the other windows will auto assist the first window before pushing "1".
So the other windows auto assist the current window, without need for any assist mechanic in your macros.

You can still do something like:
/cast [@focus] Strangulate
Which then allows you to set a Focus for a Crowd Control or PvP effect, instead of using it for assist purposes.



You can have IWT on its own key, I do too.
However, you can build IWT into your mapped keys to automatically be pressed most of the time.

I did this with a few steps.

Create an Action Target Group, called Melee which the DK's belong to but the Healer does not.

Create a mapped key.
Does not need a hotkey.
This sends your IWT Keybind to the Current Window.

In any DPS key that you spam, insert the following action:
Do Mapped Key (The Above no-hotkey IWT) with a Target of Group (all of): Melee (the ATG with the DK's only).

So your current spam '1' key used to look like this:

Hotkey: 1
Step 1:
- Do Mapped Key Action, FTL Assist Me, Target: Current Window
- Send Keystroke Action "1", to Target: Window All With Current

We modify it to be:
Hotkey: 1
Step 1:
- Do Mapped Key Action, FTL Assist Me, Target: Current Window
- Do Mapped Key Action, Unnamed Mapped Key that sends IWT, to Target: Group (all of) Melee ATG With DK's in it.
- Send Keystroke Action "1", to Target: Window All With Current

Lastly make another mapped key, this is a Toggle Key.
Give it a hotkey of some sort.
Two steps for this one.
Step 1:
- Keymap Actions > New Mapped Key State Action > Unnamed Mapped Key that sends IWT.... set to "On".
- Pop Up Text Action > "Melee IWT Mode On"
Step 2:
- Keymap Actions > New Mapped Key State Action > Unnamed Mapped Key that sends IWT.... set to "Off"
- Pop Up Text Action > "Melee IWT Mode Off"

In practice...
You spam your Spam Key... I think "2" from the information you listed in the previous post.
Your toons assist the active window.
Your toons Interact with Target, automatically because you pressed "2".
Your toons do the macro that is on "2".

When you don't want the "auto" IWT.
You press your Toggle key twice.
When you want it back on, press the Toggle key again.

[CheeseCake]

As much as i love your posts Ualaa, ive tried following your steps in ISBoxer and all i do is make things worse for myself.
Such as following this, didnt get it to work and now im left with only one alt who will IWT the rest all i get is 'your to far away' no matter where i am or what keybind its attached to.
Asked for help in chat but my stupidness was to much.

I just seem to really fail when it comes to ISBoxer
Last month i spent 2 days setting up all the keymaps, following day i load up i get corrupted file and lose everything, including the backup save i made :(

These lockups are getting more frequent now, i really love this team to :(

Restarted both systems, IWT is working again :/
Reverted to a prievious save, gonna try your instructions again

[Ualaa]

Your too far away, means your Click to Move is off.

The wizard gets you an IWT key, with two steps.
Step one turns on Click to Move.
Step two turns off Click to Move.
Somewhere after it is enabled and before it is disabled, it sends IWT to your toons.

My version is executed as a Do Mapped Key action.
And not its own mapped key that is executed on press and release.

Basically, you need to have Click to Move enabled for it to work.
Interface Options - Mouse - Check 'Click to Move'.
Or /console AutoInteract 1

Probably then change the IWT Mapped key to one step.
That sends IWT to all windows.
Nothing about enable/disable Click to Move.

That gets you.

A:
IWT key, push this once and every does IWT with my target.
Excellent for quest givers, inn keepers, flight masters, corpses to loot, etc.

B:
IWT built into melee.
Press DPS keys and melee also IWT.
With a toggle to enable/disable the auto IWT as part of your DPS.

(Note: Auto in the sense that it is built into, not that it happens without your pressing a separate key to cause it to happen... the key pressed is just also doing DPS).

[CheeseCake]

Tried folowing everything you said but with no luck :(
Had my IWT set as T, changed it to [ and now it crashes the game on the slaves change it again and still crashes :/

In wow keybindings i placed the IWT key from NUM2 spamming on razor naga to 3 on keyboard, so i spam 2 (DPS Macro) and 3 (IWT)
Lockups seem to have stopped so far.

Also sucks when im healing they stop what there doing until i get a target again or run off

EDIT: no more 5 second delay, (no didnt put a delay on my IWT keys) deleted some keymaps and reverted back to the whitelist :/

[Ualaa]

I would save your profile.

And then clear it.
Then run the wizard, for Warcraft since you're playing that game.

You can open up the Toolkit twice, and have one point to the original file you have saved.
And the new one, with the clean... wizard generated profile open too.
And copy/paste mapped keys you don't want to lose.

The wizard generated profile has a lot of features.
A basic thing is Keymaps vs Repeater.
You'll want to play with Keymaps on, and Repeater off.
You'll want to enter your password with Keymaps off and Repeater on.




Keymaps are actions the software is programmed to take.
You configure these.
They can have a hotkey, and if they do then the hotkey does whatever the mapped key is set to do, instead of what it would normally do.
That is why you disable Keymaps, when entering your password.
If your "3" key is set to assist the leader, send 1 to window 1, send 3 -and- your IWT Keybind to all the other windows.... it won't count as "3" for entering your password.

Repeater is when you want a 1 to 1 repeating of what you type or click.
This is great for /dance.
Or entering a password.
Or selecting talents on all five Feral Druids at the same time.
Or configuring your UI to be identical on all screens, by doing them all at once.




The wizard has pre-generated mapped keys for you.

When Keymaps are on, if you push 1 (or 2, 3, 4, 5, 6, 7, 8, 9, 0, - or =), the other windows will auto assist the active window, and then all characters will do whatever is on "1" the same as if you had pushed it in each window.
There is no need for any assist macros on your part.

Reading through the guide in my signature will show how the software works.
A lot of the things it says to do, is now auto generated by the wizard.
But it still shows how to make your own mapped key, and gives an understanding of how things work.



The Quick Start Guide should help you: http://isboxer.com/index.php/guides/80-quick-start-guide

The IRC is full of people who can help too.
Ask a question and wait, or periodically check back.
Don't ask if anyone is there, as people come and go but have that open in their browser or as a tab in their browswer.
The IRC: http://isboxer.com/index.php/chat

Looking at your profile can help too.
Open File in the toolkit and copy the profile to the clipboard.
Be sure to check the box to omit your account information.
Then go to www.pastebin.com and paste the profile.
Have it keep the profile for a month or so, whatever the middle duration option is.
Then paste the link to the profile, either in the IRC Chat or on the IS Boxer forum (www.isboxer.com) or here.
Tag the post as [IS Boxer] to get Lax's attention.
Post what you want to happen or what your issue is, and what is actually happening instead.

[CheeseCake]

Ok i managed to get most of it setup and it was working fine.

Problem i have is when i start clicking my DPS2 + DPS3 spamming it seems my 4xdk attack the target on a round robin...i spam, one will head off and every few seconds the next one will head off to the target, few more seconds the next one etc etc.
Also when i switch target my DKs run around like idiots between targets not sure on which one to go for.


http://privatepaste.com/fad9585c39

Ok now it just seems totally randon....i spam my keys and the things they do:

1. they head for the previous target i had, taking upto 15 seconds before they head for the target im targeting.

2. Go straight for my target all together, again taking anywhere to 1 or over 15 seconds

3. They are attacking my target, i choose another target and one by one they head for the next target like a 3+ second delay round robin.

4. They go towards my next target, half way there they get confused and head for the previous target, back and forth every second.


Ive taken almost everything out and and leave just assist me, IWT and an ability.
My focus macros i was using before have been removed.

I put everything back into my keymaps, in wow i put back the focus macro and spam that and they all head off and target together but still get confused between my target and previous target.

Ive asked numerous times over the days on chat and still no luck.

[CheeseCake]

Well ive had to bring back the focus macros as they just simply are unable to do anything right unless they do.

ATG IS DK Team
In DPS 2 i have
step1
Do FTL Assist Me in General Key Map ->self
Do Mind Freeze in DK Team Key Map ->self
Do Interact With Target in General Key Map-> DK ATG
2 ->all

Step 2
Do Death Strike in DK Team Key Map -> DK ATG (was in DPS 3)
Do Heart Strike in DK In DK Team Key Map ->DK ATG
Do Vamp Blood - Shield In DK Team Key Map ->DK ATG
Do Dancing Weapon in DK Team Key Map -> DK ATG
Do Rune Strike in DK Team Key Map ->DK ATG

DPS 3
Step 1
Do FTL Assist Me in General Key Map Self
3-> all
Do interact with target in general key map ->DK ATG

Step 2 i just deleted for now

Now having it this way i put an assist focus macro on DPS3
When they attack target they never buzz around the target they just carry on running second later they run back, if that makes sense

Over the days ive been getting help from lax and alge, posted my config numerous times in chat but still the problems just continue and i dont understand how it cannot be sorted :(

http://privatepaste.com/56b9840e00