Some questions

[Ualaa]

I'm currently using Keyclone, but a lot of the IS features are tempting me to switch my boxing software.
If anyone has answers to these, I'd appreciate your time.

Thanks.





1. I currently use four action bars (default wow bars) with keybinds which extensively use all three modifiers (Alt, Ctrl, Shift). I know my keybinds well, and am curious if this would interfere with Inner Space's automatic FTL (which is a major selling point of IS for me). Is it easier to clear all the keybinds, start IS and build hotkeys from scratch or to attempt to preserve hotkeys?


2. With this macro keybound to Shift H, and functioning differently depending on if Alt is pressed or not, will this interfere with the automatic FTL settings?
--- /use [nomod:alt] Healthstone
--- /cast [mod:alt] Ritual of Souls


3. I use the target=targettarget assist method from the No Focus Manifesto. Basically each toon targets my leader and casts at the leader's target. From my understanding of IS, it has automatic FTL assisting for the 1 through = keys, so I'd basically just put the desired spell on the button straight from the wow spellbook, instead of using a target=targettarget based macro?


4. I have a G15 keyboard, which is mostly obscure keybinds which I'd very rarely press accidently. Within the wow client, I have buttons on those keybinds. Things like Jamba Follow, Jamba Group Invite, Keyclone PiP swaps, Interact with Target, Toon specific heals etc. From Zanthor's "Zero to Hero" post, it says to close the Profiler Software; can I still use the G15 (via IS) for hotkeys and macro's?


5. Are far as setting up IS, how much of Zanthor's "Zero to Hero" post is relevant now that there is a wizard?


6. Lax has posted that the instant PiP swaps is due to rendering each window at full resolution at all times. I'm running an i7 920, 12gb ram (1600mhz), HD 4870X2, 10k rpm Raptor on a 30" inch monitor (2560 x 1600 resolution).. Will this still be smooth enough to not lose follow in Dalaran/Wintergrasp while mounted (5 clients, minimal settings except view distance on the main)?
With Keyclone, and my pally leading I can lose follow with Crusader Aura on while mounted on epic flyers, with any other toon leading (or Crusader Aura off) I've been unable to break follow aside from having toons stuck on things.


7. The mouse repeat regions for healing is a feature I'm very interested in. I'm using Grid + Grid Custom Layouts, which allows for a consistent order within the grid window. Would I make a single repeat region covering the entire grid frame or one region for each character box within grid?

[Lax]

1. No, you do not need to make any changes to your action bar keys. However, by default, only 1-= will be done with the FTL-based auto-assist. You can copy the mapped keys made by the Quick Setup Wizard and have the modified versions work just the same (e.g. add new ones for shift+1 through shift+= and so on, exactly the same as the 1-= ones).

2. No. Not all keys have, or need, FTL. The FTL only applies to the specific "Assist" "Follow" and "Target" functions -- everything else works as-is

3. Correct. You will not need [target=targettarget]

4. You can keep your existing G15 setup if you prefer. I like to disable the Profiler and set up these keys directly through ISBoxer instead of through the Logitech profiler. This allows you to write the macros in ISBoxer instead of in the game, AND bind them to the G15. That is opposed to setting up a macro in game, assigning it to something like ctrl+shift+alt+z, and telling the G15 software to press ctrl+shift+alt+Z. In other words, that whole process is given to you in a single interface. To keep your existing G15 profile, ALL you need to do is run the Logitech Keyboard Profiler as Administrator, and use it as you always have.

5. 20%-ish. The Wizard does not create Repeater Regions or explain them to you, for example. However, nearly all of it is handled by the Quick Setup Wizard. Zanthor has been a little busy and has not had the time to update the guide to add the Quick Setup Wizard usage -- and it would have to be retitled to Zero to Hero in 5 minutes instead of 30 :)

6. Only one way to find out! Feel free to request a trial. With that system, I don't foresee any problem though.

7. Drag the one region so the red area covers the entire Grid. You don't need different ones unless you want separation between the regions, or if you want to send the mouse to other clients. For example, some people have found it useful to send the left half of unit frames to a main healer, and the right half to backup healers or other characters for buffs.

[Ualaa]

A question on "Mapped Keys vs Keyboard Repeater".

With Keyclone, I have "pause" set to interrupt the broadcasting.

In IS, is Keyboard Repeater on, essentially the same as Keyclone's default behavior?
And is toggling repeater off, the same as the Keyclone's pause key?

And...
Are mapped keys then specific keys (or combinations), which are broadcast even when Keyboard Repeater is off?









If I were to put the "Spam Button" for a Click Castsequence on say Key 1 for all my toons in a set.
This has the automatic FTL settings turned on.
Something like:
/Click MultiBarRightButton1
/Click MultiBarRightButton2
/Click MultiBarRightButton3
/Click MultiBarRightButton4

But, let's say the keys on MultiBarRight are not automatic FTL broadcast keys...
Will the other toons still assist correctly?
Or would I have to copy the wizard, to make those buttons auto FTL like the default bar (1 to =) ?

[Lax]

I don't know the details of Keyclone's operation to tell you whether it is basically the same, but as I understand it, yes that would be accurate. Mapped keys indeed are processed even when Key Repeat is off -- whether it "broadcasts" or not is up to the actual mapping :)

For your spam button, you would make a Mapped Key with the hotkey of your choice (e.g. 1). It would have 1 Step, meaning that each time you press it, it does the same thing. It would have 2 Actions, first is a "Do Mapped Key Action" which will do the "FTL Assist" mapped key in the "General" key map from the wizard. Then you will use either a Keystroke Action, or a WoW Macro Action, depending on whether you want to make this macro in ISBoxer or in WoW. Either way, you pick a key combination for ISBoxer to press when you press the Hotkey -- it doesn't have to match the Hotkey. If it's a WoW Macro Action you make sure you don't use an action bar key as the key combination for it to press, since it can't replace the action bar buttons (for this reason, some people still like to make their macros in WoW in order to have them visible on the action bar).

Soooo for example..
It might be set up like this:
Hotkey: 1
Step 1 Actions:


Do Mapped Key "FTL Assist" in "General"
Keystroke Action: Press 1

.. which is precisely what the wizard is setting up for the 1 key by default. Or it could be this:

Hotkey: Alt+Q
Step 1 Actions:


Do Mapped Key "FTL Assist" in "General"
Keystroke Action: Press Shift+Ctrl+P

I should add that for each of the actions, you get to determine which characters take the action. It is relatively common to have multiple actions in order to have it press different keys in different windows. The action bar keys from the wizard will have "all w/o current" (aka "all other") do the assist, and then "all w/ current" (aka "all") press 1.

[Jhax]

The comment I would add about the wizard, is to run it and see what it does.

The resulting setup is very tidy, neat and gives a real insight into what can be achieved. Take some time and work through how the different actions are acheived.

I spent months playing with a setup I created, using a focus based master. I recently ran the wizard and have since changed to the default FTL setup, not looked back since.

My gaming requirements are being steadily ported across to the structure created by the wizard.

what I am trying to say is there are lots of ways of achieving the same result using ISboxer, which can be very messy and complicated. The Wizard gives you are clean and simple and very eficiennt template to build on.

[PhantomRogue]

The best thing to do, like Jhax said, is to run the Quick Setup guide. Understand how the Keymaps, Repeater, Layout and Character sets work, then modify them according to your own needs.

I modified the QuickSetup DPS Keys to where the Keypress 2, has 2 steps, First press broadcasts my totem script, second press of 2, recalls them. And 1 is the "Spam" key, I use almost the exact same script (bunch of /clicks, each calling /castsequence macros).

But i would have never been able to do those without the quick setup wizard and looking through the keymaps, actions and whatnot. Also, sittin in the IS IRC always helps.

As for question 6, you should have no problem, i run the same processor, only 4 Gigs of RAM and a gx260 card, and i don't lag at all.

[suicidesspyder]

Switching from keyclone to isboxer was my biggest step. The setup even with using wizard is by far more advanced. Ask anyone i still ask questions to this date be working with isboxer about a month now too. But i think i got more of a handle on it now, and to be honest i love it. I use two moniters on for main and one for the alts and ill tell u what its so nice to just click on a screen and it switches with barely a hickup. So yea keyclone and isboxer have similarities but when it comes to over all appeal isboxer does things that keyclone cant do. But keyclone is a great beggining to understand things with that kind of program becuase it makes the transition to isboxer a tad smoother in the long run.

[Ualaa]

Well, both Keyclone and Lax have given very good support for their products.
I started with Keyclone and am quite happy with it.
That said, several features of IS have strong appeal.

I've purchased a year subscription to IS, and will try the wizard.
See how it goes.

[Ualaa]

I'm having an issue getting assist to work.

On the top, under Keymaps, I have General Keymaps selected.

On the Left, with FTL Assist Me selected.
And on the right I have chosen G2 as the hotkey.
Hold and Keystroke Actions in unchanged with Default selected.
WoW: Use FTL Modifiers is unchanged with On.

On the left, with 1 selected (under FTL Assist Me and Steps)
On the right, under Step and then under Actions, the wizard gave me Assist Me - > all other
It then has Target - Window: All w/o Current.
Key Combination F
Display as (in Step) Assist Me
But First has an unselected option which is cut off (cannot read what it says, even with the Toolkit maximized), "Target Hot Character" is selected and "Restore Target Afterwards" is not selected.
As applied to has <Any Slot> selected.









Under Character Sets (top), I have chosen my Pally/Shaman's group.
On the left, under slots, I have 1 selected.
On the right, I have G13 as the hotkey to switch to this character.
On the right, When I switch to this character is checked.
On the right, Do this Mapped Key is selected.
Key Map, Control is selected.
Mapped Key, Follow/JambaMaster is selected.
Left Control is checked for FTL Modifiers.

Everything is the same for 2, except:
G14 is the switch hotkey and Right Control is checked for FTL Modifiers.

Everything is the same for 3, except:
G15 is the switch hotkey and Left Alt is checked for FTL Modifiers.

Everything is the same for 4, except:
G16 is the switch hotkey and Right Alt is checked for FTL Modifiers.

Everything is the same for 5, except:
G17 is the switch hotkey and Left Control and Left Alt are checked for FTL Modifiers.

When in game, if I press G13, in addition to switching toons, each toon also pressed the 3rd hotkey on the default bar (same behavior as pressing 3, except 3 is only the spell and not the toon swap).
When in game, if I press G14 or G15, only the hot character switches.
When in game, if I press G16, in addition to switching toons, each character presses the 4th hotkey on the default bar (same behavior as pressing 4, except 4 is only the spell and not the toon swap).
When in game, if I press G17, in addition to switching toons, each character presses the 5th hotkey on the default bar (same behavior as pressing 5, except 5 is only the spell and not the toon swap).

G1 through G5 are functioning like F1 through F5.
I don't have G1, G4 or G5 configured to do anything in IS Boxer Toolkit.
G2 is my non-functioning FTL Assist Me Keymap, under General Keymaps (see first issue above).
G3 is my FTL Follow Me Keymap, which does not work.
G7 and G11 aren't doing anything.
G8, G9, G10 and G12 are acting like F8, F9, F10 and F12 (again not configured to do anything in ISBoxer).


MR is set as a toggle for Jamba Strobe On, with the light on when strobe is on.
All of the toons follow correctly regardless of leader with MR on, and until broken continue to follow once MR is turned off.

[Ualaa]

When I press G13 to switch to the toon in Slot 1, every toon other then the one in Slot 5 automatically begins to follow. With G14, all toons except the Slot 5 toon again auto follow the toon in Slot 2.

When I press G15, G16 or G17, all toons follow the new toon.

Not sure why the toon in Slot 5 will not follow on these two switches -- G13 (Slot 1) and G14 (Slot 2)

[Lax]

Much easier to share your config, it can be copied and pasted :) (Right click on "ISBoxer" and select "Copy ISBoxer Toolkit Profile to Clipboard")

If an option is cut off, I would guess it might be due to font size or something being changed in Windows. The Targeting helper options used by the action in the FTL Assist Me key reads as follows: But first, Assist Hot Character (which is apparently cut off for you). If Target Hot Character is selected, it will target you instead of assisting you, which isn't what you want.

For FTL Follow Me, which is being used by the Follow/JambaMaster selection for each of your Slots, it sounds like there is a conflicting keybind on Ctrl+F11 in WoW. The FTL Modifiers are Left and right Ctrl, and the key it's pressing with those for the Follow key (unless you changed it) is F11. So when switching to characters 1 or 2, it is broadcasting left/right Ctrl+F11. If Ctrl+F11 is bound to something else in WoW, that will happen instead of the bind on F11 that is checking which modifiers are down.

[aboron]

Might i suggest something like http://pastebin.com/ for things like this? Or maybe attach a text file? ;)

[Ualaa]

Changed from Large Font to Standard Font, and now nothing is cut off.



Started Over; I went File -- Clear ISBoxer Toolkit Profile.
My profile can be found here: http://pastebin.com/m24aafd53


I went into Warcraft for each toon on the three teams I'm interested in playing Pally+Shaman's, Druids x5 and Mixed Team x5.
For these, I removed every keybinding that uses Alt or Control and an F-key or number.
I still have these keybinds:
Shift A, Shift S, Shift D, Shift F, Shift G, Shift H, Shift J, Shift K, Shift L, Shift ;
Shift F1, Shift F2, Shift F3, Shift F4, Shift F5, Shift F6, Shift F7, Shift F8, Shift F9, Shift F10

I ran the ISBoxer Toolkit Wizard again.
I've made these changes from what the Wizard gave me:
1. Changed the Hotswitch keys to G13, G14, G15, G16 and G17.
2. Changed the Invite hotkey to G18.
3. Given each slot a unique FTL modifier, not using Shift for any of them.
4. In Keymaps (General), Changed FTL Assist hotkey to F, changed the Key Combination to F, and unchecked "But First", and typed /target {FTL} in the Macro Generator window.
5. In Keymaps (General), Changed the FTL Follow Me hotkey to G3.
6. In Keymaps (General), Changed Toggle Jamba Follow Strobing Hotkey to MR. On Step 1, added MR Light On. On Step 2, added MR Light Off.
7. In Keymaps (Control), Changed Activate Maps hotkey to M3. Added Light on to Step 1 and Light off to Step 2.
8. In Keymaps (Control), Copied Repeater. Renamed the first Keyboard Repeat. Renamed the second Mouse Repeat.
9. Altered Keyboard Repeat to only turn on/off Keyboard Repeating. Changed the Hotkey to M1, added Light On/Off.
10. Altered Mouse Repeat to only turn on/off Mouse Repeating. Changed the Hotkey to M2, added Light On/Off.
11. In Windows Layouts, Remove Border around main window and "Slave" regions Always on Top are both checked.
12. Session 1 borrows a region from the Active Window.




Pressing the F key in game results in each of the other targets assisting the Active Character. (Assist issue fixed).
*Edit* Restarted IS, and this no longer works although at that point nothing was changed in ISBoxer Toolkit.

Pressing G13 through G17 to switch which character is in the large region still results in attempting to cast something on the default action bar.

G1 through G12 still acts as if I'm also pressing F1 through F12 at the same time. Putting my assist action onto G2 for example results in all the other toons assisting the hot character, but the hot character targeting the party member as if they had pressed F2 in game.

If I Alt-Tab out of game, to get to Firefox or ISBoxer Toolkit, and then return to Inner Space, one of the windows is fine, but all of the others are heavily distorted with text mostly ineligible. The FPS in the top left is enlarged. Pressing Escape for the wow menu brings up the window, but every option is entirely blurred beyond recognition.

[Ualaa]

Hmm restarted Inner Space after dinner...
And I cannot get the toons to assist to pick a target.

It's confusing.
The assist is exactly the same as the one called by the FTL for spells on keys 1 to =.
But to actually get the slaves to target the hot characters target, so I can click my interact with target keybind... no go, once again.

[Ualaa]

Some weird behavior.

I turn keyboard repeating on.
Have every toon /Target Judsea
I then turn repeating off.
Now they all have a target.

I have Lesser Healing Wave on hotkey 4 on each of the shaman's.
That particular hotkey is blank on the Paladin.

If I'm on the toon in Slot 1, characters in slots 2 and 5 cast.
The shammies in Slots 1 and 4 do not cast.

If I'm on the toon in Slot 2, characters in slots 2 and 5 cast.
The shammies in Slots 1 and 4 do not cast.

If I'm on the toon in Slot 3 (Paladin) all four shammies cast.

If I'm on the toon in Slot 4, all four shammies cast.

If I'm on the toon in Slot 5, characters in slots 2 and 5 cast.
But shammies in slots 1 and 4 do nothing.

[Ualaa]

At the password stage, I turn on keyboard repeater and turn off keymaps.
When I'm at the account/password screen, the numbers above the letters do not work.
I need to use the NumPad to enter the numerical portion of my password.
Once I'm in game, the numbers above the letters work fine again.





On a fresh install of the G15 Profiler software, it will detect World of Warcraft.
The WoW default profile has G1 through G12 functioning the same as pressing F1 through F12.
Within ISBoxer Toolkit and Inner Space, those G-keys are functioning the same way.
If I make a keymap, and click on the icon to the right to type a key combination in, pressing a G-key has it display the F-key of the same number.

If instead of pressing the G-key itself, I use the scroll down arrow, I can manually pick a G-key instead of entering it.
When I manually pick it, the G-key press activates the intended keymap correctly.
However, it also functions the same as pressing the associated F-key.
So for example anything on G1 will also have the hot character target themselves, or anything on G2 will have them target the first party member.





I'd like to configure an assist key where the slaves all end up with the same target as the hot character.
With the automatic FTL on the default bar, they end up casting at the same target as the hot character, but they don't change their target.
Pretty much, the closest I can get to an assist in Keymaps is to have the slaves target the hot character.

I tried to make a Keymap where "all without current" press the F key, and assigned it the F hotkey.
F within wow is the default (and my) assist key.
However, F does not cause the other toons to assist their target.
Even turning keyboard repeating on, F does not cause assist.
I'm not sure if that's because I had F as a hotkey for a keymap, but even after I removed F as the hotkey, it is not broadcast in game.
I made a keymap for Shift-G, in exactly the same manner, except instead of "All without Current", the group was Shammies; Shift-G is my hotkey for Totemic Recall.

[Ualaa]

Another issue... (I'm going to get this program to work, I like the features)...

I ran the wizard again, and this time added the characters for my Druid team.
The druids have no hotkeys set, no keybinds set within warcraft.
Basically nothing that can conflict with IS Boxer.

I checked automatic FTL for this team too.
For every keymap, it still has the FTL syntax for my shaman team.

Do I need a different set of FTL modifiers for a new team?
In the wizard, I set:
-- slot 1 to Left Control.
-- slot 2 to Right Control.
-- slot 3 to Left Alt.
-- slot 4 to Right Alt.
-- slot 5 to Left Alt + Left Control.
Which is the same as I had set for the Pally/Shaman team.

When I try to make an FTL keymap for this team, it has the FTL modifiers correct, except they still refer to the Shaman/Paladin names and not the Druid names.

How do you use IS for more then one team?

[aboron]

I believe you need to disable or remove the Gkey profile so that you do not get IS picking up the G keys and performing your actions, and then the profile causing a simultaneous F key press all the time.


http://www.lavishsoft.com/wiki/index.php/IS:Multiboxing_Guide#Configuring_the_Logitech_G15_ or_G11_for_use_with_Inner_Space_keybinds

[aboron]

When you are setting up a key, there is the "Target" entry box for which clients to send, just to the right of it is a little asterisk * that when you click it, lets you change the team used for previewing the names in macros.

You should be fine using the same modifiers over and over, as long as you create a new team. The names showing in the macros as you edit them are just examples, the final generation will take place properly for all teams when you export to innerspace.

[Lax]

With so many long posts it's hard to follow and know where you're at exactly. I'm actually not sure how many parts I need to respond to ;)

What Aboron said is accurate and should help (both posts). You shouldn't need to change anything to make it work for your other character sets, the final macro text thing is purely a display issue and solved by changing the team that is being displayed as Aboron mentioned about the * button.

Note that the "press the key combination here" box will currently only detect normal keyboard and mouse buttons (and if you hit G1 and it comes up as F1 in the box, it is from the keyboard's profile pressing F1). All other buttons have to be manually selected from the drop-down as you've discovered.


At the password stage, I turn on keyboard repeater and turn off keymaps.
When I'm at the account/password screen, the numbers above the letters do not work.
I need to use the NumPad to enter the numerical portion of my password.
Once I'm in game, the numbers above the letters work fine again.
They do not work as in even on the current window no number is typed? If Key Maps are actually ON (noting that the first step actually turns them on instead of off), then they're first going to be pressing your assist key, then the number key.


4. In Keymaps (General), Changed FTL Assist hotkey to F, changed the Key Combination to F, and unchecked "But First", and typed /target {FTL} in the Macro Generator window.
You want this one to /assist {FTL}, not /target or /targetexact. Unless you're using something like /cast [target=targettarget] in your action bar buttons I guess, but if your other teams aren't doing that this would be a problem.

[Ualaa]

Resolved:
A.
I didn't change anything in my IS, but the password thing is working fine now. IS did do a patch before it started up, not sure if that's the reason.


B.
I have managed to get the non-hot toons to assist the hot toon, by disabling the "But First" and manually typing in /assist {FTL} as suggested.


C.
As mentioned the FTL can be changed in the Toolkit to refer to any character set, and even without changing the set, it works fine in the actual game.


1.
I'm not sure how to "remove or disable the G-key profile". G1-G12 can do whatever they're assigned to do, but they also press F1 through F12. I want to disable the F1-F12 simultaneous keypresses so a G-key will activate the macro or key combination its supposed to do, without also pressing function key combinations.

Resolved: Disabled Profiler on start up, and ended task for each Logitech application such as LCD Screen etc. Previously was not giving UAC approval to the Profiler, but had the other applications at start up.

Not really sure why, but unless I start the Profiler software myself and then end the process, IS/WoW acts as if it is enabled.


2.
My click castsequences are not performing as I'd like. The spam button is on 1 for each toon. On keypress 1, each of the shammies does their Elemental Mastery. None of the keypresses clicks the MultiBarButtons at all. If I mouse click on the wow macro, it executes as desired. Even within the window, it will not execute via spamming the 1 key.

The macro specifically calls other button slots via "/Click MultiBarBottomRightButton#" rather then a hotkey/key bind. I'm not sure how to get Click style macro's to work within IS Boxer.

The shammies button is:
#show Lava Burst
/cast Elemental Mastery
/Click MultiBarBottomRightButton7
/Click MultiBarBottomRightButton8
/Click MultiBarBottomRightButton9
/Click MultiBarBottomRightButton10

Have changed the FTL back to default for everything except "FTL Assist Me", "FTL Follow Me", and "FTL Target Me". Will test the FTL keys to see if their behavior changes. Toons are now Clicking the buttons the click macro calls.


3.
I have Lesser Healing Wave on keybind 4, for each of my shammies. That button is open for my Paladin. When I'm playing my paladin (slot 3) or the one of the shammies (slot 4) and press that button, each of the shammies casts a Lesser Healing Wave at my Paladin's target.

When I'm on my Slot 1, Slot 2 or Slot 5 characters (shamans) only the Slot 2 and Slot 5 shammies cast the Lesser Healing Wave. The Slot 1 and Slot 4 shammies don't cast anything at all.

My Purge on key 7 and Chain Heal, on key 9 has the same issue, so I'm suspecting all of the automatic FTL assist keys have this same issue.

Resolved.
Changing back to "default" for the FTL fix on issue #2 has also fixed this issue. All toons cast on these keys now.





Current Profile:
http://pastebin.com/m12ffbd30


Current Issues:

[burningforce]

1- make sure there are no keys assigned to the G-keys in the logitech profiler, also make sure delay or repeat is not on in the logitech software. then go in the options of the profiler, untick start with windows and close the profiler. then press ctrl + shift+ esc and end the other logitech running process called "logitech gamepanel agent".

3- are the shamans in the group with you? I believe FTL only works if in a group with the characters. I could never get FTL to work with my 80 priest outside the shaman group. also make sure the isboxer addon is enabled on all toons you are playing at that time

[Ualaa]

Number 1 is resolved, thanks Burningforce.

Number 2 and 3 are resolved, thanks Lax.

[Lax]

2.
My click castsequences are not performing as I'd like. The spam button is on 1 for each toon. On keypress 1, each of the shammies does their Elemental Mastery. None of the keypresses clicks the MultiBarButtons at all. If I mouse click on the wow macro, it executes as desired. Even within the window, it will not execute via spamming the 1 key.

The macro specifically calls other button slots via "/Click MultiBarBottomRightButton#" rather then a hotkey/key bind. I'm not sure how to get Click style macro's to work within IS Boxer.

The shammies button is:
#show Lava Burst
/cast Elemental Mastery
/Click MultiBarBottomRightButton7
/Click MultiBarBottomRightButton8
/Click MultiBarBottomRightButton9
/Click MultiBarBottomRightButton10
I see that you have made changes to the "FTL DPS Keys" Key Map, which are going to cause problems. Specifically:
1. The "Use FTL Modifiers" option is set to ON for the Key Map
2. The "Use FTL Modifiers" option is set to ON for the "DPS 1" key in the Key Map
3. The "Use FTL Modifiers" option is set to ON for the "DPS 2" key in the Key Map

The only keys that should have this option enabled are: "FTL Assist Me", "FTL Follow Me", and "FTL Target Me". This keeps the FTL independent of your actual action bar buttons.

This likely affects your #3 as well.

[Ualaa]

Another question.
Or more along the lines of... is my understanding correct and/or is this the easiest way to accomplish this?

I'm currently using a Tremor stagger macro within warcraft.
The macro's are keybound to Shift Tilde within wow.

Shaman 1 has /castsequence reset=5 Tremor Totem,,,
Shaman 2 has /castsequence reset=5 ,Tremor Totem,,
Shaman 3 has /castsequence reset=5 ,,Tremor Totem,
Shaman 4 has /castsequence reset=5 ,,,Tremor Totem

To convert this to InnerSpace, I'd just drag Tremor Totem (no macro) from the spell book to that hotkey.
Then instead of a Keymap which is triggered by Shift Tilde and sends Shift Tilde to all windows, I make a step per shaman.

The keymap is triggered by Shift Tilde.
The Target for Step 1 is either Slot 1 or Shaman 1's name.
By going Slot 1, I can use the keymap for other groups if something benefits from being staggered.
By going Shaman 1's name, Shift Tilde is effectively not a keymap for every other group.
The key combination it sends is still the same.

Then Step 2 sends to Slot 2 or Shaman 2 etc.

[Lax]

Right, that would be the general idea of round-robin with ISBoxer.

[Ualaa]

Thanks, Lax.