Multi Step Isboxer Project [Update]

[Aragent]

CERTAIN MACROS ARE BROKEN AND THERE ARE ISSUES WITH ISBOXER SETUP. EITHER WAIT UNTIL OP HAS UPDATED OR USE AT YOUR OWN RISK.

Multi Step Isboxer Project [Update]

The Plan of the project is create a complete system that can implement in Isboxer for wow. (with the hope that Lax can incorperate this into the quick setup Wizard)

The idea is to create a Standard setup for those new to multiboxing and Isboxer can use from the start to play. but that experianced users can tweek for there individual preferances.
I shall start with PVE
If the comunity helps then I would like to add PVP Macros (For those that PVP) (as PVP is competitive I Understand people being reluctent to give up there secrets Macros but would ask for the Basic's to help thoughs just geting started
lastly again if we can get the support I would like to add macros for Dungeons and Raid encounters (again as this is competitive I would not ask for ones you are curently working on but for those that you have already completed to help those starting out)
As befor I would first like to thank serveral people

Mercuiro: For his Mecurio's Cataclysm Multiboxing Macros, Mercurio's Cataclysm Macros at 85 (which got me working on this in the first place)

Ualaa: For his My Guide to IS Boxer http://www.dual-boxing.com/showthread.php?t=26231 (where the melee IWT, and other info came from)

Lax: Not only for ISboxer but also for the idea and help with Situationals.
also for listening to me and taking the time to discuss this project and mack sugestions as to it's direction
Last but not least all who have added there Macros and Castsequence which I am looking at trying to add.

Some Small Disclamers
Though I learned a lot from the old project This is now still only a (beta)
I will be planing on tweeking it and the macros as we go along so constructive input is welcome
[not All Classe'sand spects are yet added but I am working on it.]
and I will be adding to it till it is a complete package
At this time all DPS, Tank classes and specs have been added

Also due to the Forum, spaces sometimes are displayed that I have no control of so please check the Macros if you are cuting and pasting

Also as diligently as I try some typos tend to make it into the project [Though I do promise I shall endeavor to keep those to a minimum, and will quickly correct them when such errors are reported].

Why an Update to the old My 2 isboxer 2 step Macro and Setup Project.
several reasons
1. Lax made some fundamental changes with Isboxer 38 one of wich was allowing us access to the wow macro library and though this did not break the old project its posable with the structure change it could in the foreseeable future with addition isboxer updates so thought it prudent to convert to the new structure now than wait till later.
2. After discussions with Lax about the plan and implimentation of the project it was thought that going in this new direction would make maintaing the macros easier as they may have the propensity to get quite massive as we expand into multi level macros.
3. Also of Note is I have changed some Nameing Configurations with the new setup in order to help sort the macros in an atempt to help make maintaining the macros easier.
Setup:
ATG [Action Target Groups]
I Create Action Target Groups for levels this is to allow Multi Level Macros for each Class and Spec.
Example 01 - 04

http://4thewin.org/2step/Action_Targ...ups_levels.PNG

I Create Action Target Groups for Each Class and Spec [My hope these will be added by Lax in Wow set up wizard in the near Future]
Naming Convention [Class, Class Name with a S, Spec] Class was added in front of the class name to keep the groups in alphabetical order for sorting reasons
Example of Naming Convention [Class Death Knights Blood]

http://4thewin.org/2step/Action_Target_Groups_class.PNG

　
Next:
I use a veriation of Ualaa's Melee Iteract with targets (becuase I forget to toggle) However if you already have a Melee IWT I belive you can figure out how to implement this into your curent setup (I am available here on the forum for assistance)
Create an Action Target Group, call it WoW Melee (For better sorting).
Add all of your Melee toons to this group.
Create an Action Target Group, Call it WoW Non Melee (For better sorting) [this will stop Caster types and hunters from following Melees into combat if they are your main acticve window].


Now make a new mapped key (I create a New Key Map Called Custom and put mine in this Custom Keymap so as to keep my alterations seperate from the standard isboxer settings).
Call it Melee IWT.
No hotkey,
Execute a step when the hotkey is pressed or released.
nothing in advanced.
Steps 2.
Step 1,
Actions:
Do Click to Move On in Control Key Map -> WoW Melee [Group (all of):WoW Melee]
Do FTL Assist Me in General Key Map -> WoW Melee [Group (all of):WoW Melee]
DO INTERACTTARGET in WoW Key Bindings Key Map -> WoW Melee [Group (all of):WoW Melee]
Down -> WoW Non Melee [Group (all of):WoW Non Melee] [This is a New Key Stroke Action]
Step 2,
Do Click to Move Off in Control Key Map -> WoW Melee [Group (all of):WoW Melee]

Now make a new mapped key (I put mine in this Custom Keymap so as to keep my alterations seperate from the standard isboxer settings).
2 step.
hotkey, (make this what ever key you wish to press) [mine is set to z]
Execute a step when the hotkey is pressed or released.
advanced. World of Warcraft: Use FTL Modifiers On
Steps 2.

http://4thewin.org/2step/2step_Macr_ setup_basic_settings.PNG

Advanced:

http://4thewin.org/2step/2step_Macro_setup_advaced_settings.PNG

Step 1,Actions:
- Do FTL Assist Me in General Key Map -> Self [Window:Current]
- Do Melee IWT in Custom Key Map -> WoW Melee [Group (all of):WoW Melee]
- WoW macro 'Death Knights Blood Rotation' in 'WoW Class Rotation' [Window:All w/ Current]

http://4thewin.org/2step/2step_Macro...e_settings.PNG

Step 2
Actions:
- Do FTL Assist Me in General Key Map -> Self [Window:Current]
- Do Melee IWT in Custom Key Map -> WoW Melee [Group (all of):WoW Melee]
- WoW macro 'Death Knights Blood Proc' in 'WoW Class Rotation' [Window:All w/ Current]

Repeat of above just with Proc Settings instead of Sequence.


I am currently trying to figure a toggle that will allow us to move a specific character out of Level ATG group and allow us to put it in another Level ATG group
(though after talking with Lax This can be done but not much use) as we will still be required to Export all to Isboxer whean ever we change ATG's and then a refresh of the wow UI.

Curently this gives us a Spamable Key (again mine is z) that will automaticaly send melee into combat cause all non melee to take a step back and everybody start there Attack sequence.
Next we add New Macros Under [Game Helpers / World of Warcaft]

Game Helpers
World of Warcraft
Macro Sets:

Quick Setup 38
[Create] WoW Class Proc
[Create] WoW Class Sequence
Now Under Wow Class Proc I Create New WoW Macro I name them Class Name with and S then spec then Proc, I do this For each and every Class and Spec
Example Death Knights Blood Proc

Now Under Wow Class Sequence I create a New WoW Macro I name them Class Name with and S then spec then Proc, I do this For each and every Class and Spec
Example Death Knights Blood Sequence
This is a Change in the new My ISBoxer Updated 2 Step Macro and Setup Project: in the old peoject we had one big macro that had all the Classes and specs in one Big Macro, but because we are adding in multiple leves the Macro would become quite huge,
Basic Proc Macro convention
!if (character in "Class Class Name Spec") /used when you want it to work for the whole spec
!if (character in "Class Class Name Spec" and character in "Level ATG") /used for a Spec at a Certain Level Group
　
See Below for Macros: to getthe idea.