Feral Druid Macros for DPS and Tanking

I've searched everywhere for cat (DPS) and bear (tanking) macros for my new Druid. These were the best I could come up with.
Hopefully someone here can improve them.

Cat macros when behind the target.

Main macro
/startattack
/click BT4Button20
/click BT4Button21
/click BT4Button22

BT4Button20 Macro
/castsequence reset=target Faerie Fire (Feral), null

BT4Button21 Macro
/castsequence reset=7 Mangle (Cat)(Rank 5), Rake(Rank 7),Savage Roar(Rank 1), Shred(Rank 9),Shred(Rank 9), Rake(Rank 7), Shred(Rank 9), Shred(Rank 9), Rip(Rank 9),

BT4Button22 Macro
/castsequence reset=30/target Tiger's Fury(Rank 6),,,,,,


Cat macros when not behind the target.

Main macro
/startattack
/click BT4Button20
/click BT4Button23
/click BT4Button22

BT4Button23 macro
/castsequence reset=7 Mangle (Cat)(Rank 5), Rake(Rank 7),Savage Roar(Rank 1), Mangle (Cat)(Rank 5),Mangle (Cat)(Rank 5), Rake(Rank 7), Mangle (Cat)(Rank 5), Mangle (Cat)(Rank 5), Rip(Rank 9),


Bear macro
/cast Maul
/click BT4Button24
/click BT4Button25

BT4Button24 macro
/castsequence reset=30 Demoralizing Roar(), null

BT4Button25 macro
/castsequence reset=13 Mangle (Bear)(), Faerie Fire (Feral)(), Lacerate, Mangle (Bear)(), Swipe(Bear)(), Faerie Fire (Feral)(), Mangle (Bear)(), Lacerate, Swipe(Bear)()

Any help with improvements to these macros would be greatly appreciated.

Surely someone has got to have some better macros than these. I'm thinking of using rip manually as sometimes it doesn't cast.

Anyone have any updates to these macros since i am looking at using a druid tank

I didn't have a whole lot of success with a Bear tank in my mixed group.
Was running Disc Priest, Bear Tank and the others the same as below.
I switched each class to dps... Shadow Priest, Frost Mage, Boomkin, Elem Shammy, Affliction Warlock.

Not sure that my macro for the bear was the best, but I was using...

#show Maul
/click MultiBarRightButton1
/click MultiBarRightButton2

Button 1
/castsequence reset=combat Faerie Fire, Enrage, Demoralizing Roar, Null

Button 2
/castsequence reset=combat Mangle (Bear)(), Lacerate, Swipe(Bear)(), Mangle (Bear)(), Maul, Swipe(Bear)()


My problem was not enough threat on secondary targets. I'd frequently find a DPS had pulled threat from the tank via Chain Lightning or that the healer had via Renew + Penance taken aggro from a secondary target.

I found the Pally using a 96969 macro allows my 4x shammies on the other team to do as much AoE as they want without the ability to take threat.

Not sure that my macro is the best, but its another option to consider.

bumping this! Just started tanking with my druid on a second team. looking to see if any others have anything to add/change with what has been posted so far.

Quote:

---

Originally Posted by Lyonheart

bumping this! Just started tanking with my druid on a second team. looking to see if any others have anything to add/change with what has been posted so far.

---

I've tanked ToC 10 and everything previous (ulduar 10 hard modes, ulduar 25)

with this:

Code:

---

/cast maul
/castsequence reset=3 Mangle (Bear)(), Faerie Fire (Feral)(), Lacerate, Mangle (Bear)(), Swipe (Bear)(), Faerie Fire (Feral)(), Mangle (Bear)(), Lacerate, Swipe (Bear)()

---

It's great for single target threat, for multiple mobs, I spam swipe and mix this in with it.

Quote:

---

Originally Posted by Svpernova09

I've tanked ToC 10 and everything previous (ulduar 10 hard modes, ulduar 25)

with this:

Code:

---

/cast maul
/castsequence reset=3 Mangle (Bear)(), Faerie Fire (Feral)(), Lacerate, Mangle (Bear)(), Swipe (Bear)(), Faerie Fire (Feral)(), Mangle (Bear)(), Lacerate, Swipe (Bear)()

---

It's great for single target threat, for multiple mobs, I spam swipe and mix this in with it.

---

works like a charm! Thx!

Just the few I use:

Pulling with FFF
#showtooltip
/cast Faerie Fire (Feral)
/startattack

My main tanking Macro. Since we're not rage starved at all, I combine this with Maul on raid bosses to keep ahead of those aggro hungry DPSr's. =P I don't macro a lot of my tanking abilities just out of personal preference. The other macros others have posted look great tho.

#showtooltip
/castsequence reset=6 Mangle (Bear)(Rank 5), Lacerate, Lacerate, Lacerate
/startattack

Swipe/Maul (this is a rage chewer on mobs that don't hit very hard and hence leave you rage starved, just FYI)
#showtooltip
/cast swipe (bear)
/cast maul
/startattack


Some seldom used but sometimes useful macros for initial aggro

If your worried about initial aggro in Heroics.
/castsequence [nostance, target=player] reset=target/combat Regrowth, Rejuvenation, Nature's Grasp, Dire Bear Form

Same as the above but without Regrowth
/castsequence [nostance, target=player] reset=target/combat Rejuvenation, Nature's Grasp, Dire Bear Form

For Heroics- My pull key has swipe on it also. When they get to me I get in 2 swipes, make sure they land, then go to the tanking sequence. If I do this the aoe won't pull them off.

My sequence is a mangle, lacerate, swipe, lacerate rotation. I want to keep ahead on the threat and lacerate/swipe have a high threat modifier.

I don't raid with my bear. I only do 5 mans. If I attend a raid it is always on a shaman lol.

As an old school bear tank (from the days when swipe was crap) I use a hurricane pull so I do not lose AoE threat. I also have FFF set to fire at my focus target if it exists so that I can keep ranged targets that I cant LoS on me if they are not in melee range (mainly for ToC)

Aoe pulls is pretty much swipe spam
Single taget is similar to Svper's (not logged in to check right now but looks very similar)

I use ISBoxer Keymaps to switch between single target and aoe

Quote:

---

I use ISBoxer Keymaps to switch between single target and aoe

---

How do you do this? (yes im a noob at isboxer).

Quote:

---

Originally Posted by Svpernova09

I've tanked ToC 10 and everything previous (ulduar 10 hard modes, ulduar 25)

with this:

Code:

---

/cast maul
/castsequence reset=3 Mangle (Bear)(), Faerie Fire (Feral)(), Lacerate, Mangle (Bear)(), Swipe (Bear)(), Faerie Fire (Feral)(), Mangle (Bear)(), Lacerate, Swipe (Bear)()

---

It's great for single target threat, for multiple mobs, I spam swipe and mix this in with it.

---

I'm curious how you mix this in. Do you just swipe and burn through the cooldown of it by pressing this macro? That seems like it'd make the most sense, but I just ask, since I noticed Swipe was also in the macro itself. So I was just curious.

I want to put it on a single spam macro using a /click and two buttons if needbe, so I was curious how it was done.

And since I haven't said it enough yet.... curious.

Tagging for Bear Tanking!

My 5 x Druids are only 63 so I'm still at an experimental stage. I was able to do Ramparts with these macros. Tomorrow I'll start Citidel and see how the macros pan out. Let me see if I can remember off the top of my head what I used. I don't have Lacerate yet, but as soon as I reach level 66 that will be incorporated.

Macro: Mob Attack:
/click ActionButton1
/click ActionButton2
/click ActionButton3

For a Boss I added Demoralizing Shout. I don't start off with it though, I have the macro setup to do the other actions first to establish a bit of threat. here is what I use for bosses.
Macro Boss Attack:
/click ActionButton1
/click ActionButton2
/click ActionButton3
/click ActionButton4
/click ActionButton5

Macro for ActionButton1:
/castsequence reset=target Faerie Fire (Feral),,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

Macro for ActionButton2:
/castsequence reset=target Swipe

Macro for ActionButton3:
/castsequence reset=target Maul,

Macro for ActionButton4:
/castsequence reset=target Demoralizing Shout,,,,,,,,,,,,,,,,,,,,

Macro for ActionButton5:
/castsequence reset=target Mangle,,,,

Basically this is how it goes, if I can explain it right. The "," represent how many button pushes it will wait before trying to initiate it. So for example the SWIPE macro. I put only 1 comma there. Otherwise every button push will try and use SWIPE unless your pushing buttons like crazy. I leave room for at least 1 comma so if my MAUL is ready, the macro will push MAUL. You notice I have 2 commas on that to wait for at least 2 more button pushes before trying to initiate it again. Since Mangle has a 6 second cooldown anyway, I have at least 4 commas on it to skip at least 4 of my button mashing.

All this comma stuff really depends on how quickly you push the buttons. You'll have to adjust to it according to how quickly you push buttons. If your patient and steady with it, and have the rage, it seems to sequence rather nicely. Incase people are wondering about why 30 commas on Faerie Fire. Well the debuff stays on target for 5 minutes. So I'm not in a rush to sequence that spell all the time. You do see however the button macros say "target=reset." Well as soon as one mob is dead and I target another, since its a new target, and the first "/click" sequence is for Faerie Fire so it tosses that on the new target to start off. It's a nice thing to use when pulling a target to ya. I push my Mob Macro button that casts faerie fire, and I just move off to LOS them to a make them come together, push my Mob Macro again and it does swip (the next sequence of the /click macro). Hope all this makes alot of sense.

All this ideas I got from EatCarbs guy that made alot of awesome videos.

Also on the Tank, I have 2 buttons with the same Mob Macro button and 2 buttons with the same Boss Macro button. But on the other 3 DPS Druids I have only 1 button setup for mob attacks, and 1 button setup for boss attacks. Why? Well when I push <6> on my keyboard, only my Tank is attacking the mob, DPS is just chillen. But when I push <7> my Tank is still following its macro sequence, but now my DPS is kicking in on the action. Here are the macros I use for my 3 Boomkins.

Mob Macro for Boomkin:
/assist Thexeclone
/click ActionButton3

Boss Macro for Boomkin:
/assist Thexeclone
/click ActionButton1
/click ActionButton2
/click ActionButton3

Macro for ActionButton1:
/cast sequence reset=target Insect Swarm,,,,,,,,,,,,,,,

Macro for ActionButton2:
/cast sequence reset=target Moonfire,,,,,,,,,,,,,,,

Macro for ActionButton3:
/castrandom Wrath, Starfire

I give all credit to EatCarbs. I don't know if he's on this forums, but he's on the other Multiboxing forum. He has an awesome post on how he sets up macros. My explanation doesn't do justice.

Good luck!

He's here too.

Quote:

---

Originally Posted by Ridere

I'm curious how you mix this in. Do you just swipe and burn through the cooldown of it by pressing this macro? That seems like it'd make the most sense, but I just ask, since I noticed Swipe was also in the macro itself. So I was just curious.

I want to put it on a single spam macro using a /click and two buttons if needbe, so I was curious how it was done.

And since I haven't said it enough yet.... curious.

---

Sorry I haven't replied to this sooner


I have 2 buttons I tank with, 1 for when I want single target threat (I'm glyphed for maul) so when I have 2 or fewer targets alive, I spam this macro. When there are more than 2 targets alive, I spam a 2nd key that is just swipe. Both keys relay the DPS Spam key to all slaves.

Quote:

---

Originally Posted by Svpernova09

Sorry I haven't replied to this sooner


I have 2 buttons I tank with, 1 for when I want single target threat (I'm glyphed for maul) so when I have 2 or fewer targets alive, I spam this macro. When there are more than 2 targets alive, I spam a 2nd key that is just swipe. Both keys relay the DPS Spam key to all slaves.

---

No worries on the delayed reply. Your macro works great. I downed Gundrak and UK my first night of boxing without a single death, and got two of the three extra "fluff" achievements in Gundrak. Didn't know about the Less Rabi one, so i'm working on that now with a wind shear cast sequence :D I've since also gotten the "on the rocks" achievement in UK, though that one was a tad tricky with worry about the adds and such.

I also have also added culling of stratholme to my list, and my young little bear tank is starting to get pretty good.

My main issue is picking up adds that may run back to shamans and then the resulting healing required.

I really need to work out better healing macros.

I'll tell you what, though, four healing stream totems (one taltented/glyphed), earth shield and riptide basically means my healer spams lightning bolts during the fight :P it's pretty awesome.

Quote:

---

Originally Posted by Seldum

How do you do this? (yes im a noob at isboxer).

---

For your bear toon, you need three keymaps.

Keymap #1 will be the existing FTL DPS key, that you use for your bear macro.

Keymap #2 will be a new FTL DPS key, that will be your swipe key.
We make this new key, by copying the original FTL DPS key of the bear macro.
But changing it, so the target is only your bear toon.

It has the same hotkey to activate as the FTL DPS key.
It only targets/affects the bear toon.
The output key combination will be different.
Point it to the keybind for your Swipe ability.
Or have it do a warcraft macro for Swipe (if you do your macros within IS Boxer).

Keymap #3 will be a toggle.
So we will give it two steps.
On Step 1, we want to enable the original FTL DPS keymap for our Bear toon.
On Step 1, we want to disable the new FTL DPS keymap (swipe) for our Bear toon.
On Step 2, we do the reverse for both of these actions.

If you want, you can include Pop Up Text on the screen, alerting you to which version you are on.

The toggle is done like this: Actions >> Key Map Action >> New Mapped Key State Action.

I updated my macro a bit. I lost less threat from group mobs with just using Faerie Fire (Feral), Swipe, Maul rotation.

I'm looking forward to more videos by EatCarbs. (^_^)